Re: ethernet not working

From: bryan hepworth (bryan_at_redfedora.co.uk)
Date: 04/30/05

  • Next message: neidorff: "Re: Won't boot to X after install"
    To: "For users of Fedora Core releases" <fedora-list@redhat.com>
    Date: Sat, 30 Apr 2005 18:54:28 +0100
    
    

    ----- Original Message -----
    From: "Michael Hennebry" <hennebry@web.cs.ndsu.nodak.edu>
    To: "For users of Fedora Core releases" <fedora-list@redhat.com>
    Sent: Saturday, April 30, 2005 5:51 PM
    Subject: Re: ethernet not working

    > On Sat, 30 Apr 2005, bryan hepworth wrote:
    > bh quoted mh:
    >> > there. I thought I'd seen a red FAILED message
    >> > whiz by with something like ethernet in it.
    >> >
    >> > I'm at a loss. Even if I find the corresponding
    >> > log message, I expect it wouldn't tell me how to fix it.
    >> > How-tos rarely tell how to fix something after one thinks
    >> > he did it right, but it still doesn't work.
    >> > Can anyone point me to one that does?
    >
    > On Sat, 30 Apr 2005, bryan hepworth wrote:
    >> What ethernet card is it?
    >
    > I think that the following lpsci output applies to my machine.
    > 02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
    > (rev 78)
    > Subsystem: Dell Computer Corporation: Unknown device 010d
    > Flags: bus master, medium devsel, latency 64, IRQ 11
    > I/O ports at ec80 [size=128]
    > Memory at fe1ffc00 (32-bit, non-prefetchable) [size=128]
    > Expansion ROM at fe200000 [disabled] [size=128K]
    > Capabilities: <available only to root>
    > I forgot to right some important things down.
    > The output is actually from its brother, on which I am not root.

    Hi Mike

    I nearly asked if it was a 3com card in my original post! I had a problem
    with a couple of servers at work with the same card. I'll delve back into
    what I did to sort it, it was a couple of years back so I can't remember off
    the top of my head.

    Bry

    -- 
    fedora-list mailing list
    fedora-list@redhat.com
    To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    

  • Next message: neidorff: "Re: Won't boot to X after install"

    Relevant Pages

    • Re: Network problem
      ... > removed card. ... > switch shows cable OK. ... > computers/devices on the local network but cannot even ping the switch. ... With only an expansion ethernet card active in the ...
      (Fedora)
    • Re: ConmanClient.exe hates Wireless connections ???
      ... on Windows Ce .Net devices using Wireless Ethernet cards? ... Wirless Card without any problems. ... Ethernet Card, it works 100% of the time. ... earlier, if I use a relgular Ethernet Card, the deployment process always ...
      (microsoft.public.dotnet.framework.compactframework)
    • Re: DG965 and FC5 NO GO - How about 945 chipset?
      ... > newness of the 965 chipset. ... and I added a Ethernet card and a Video Card. ...
      (Fedora)
    • Re: two gigabit cards on one server = problem
      ... Ethernet Card 2: ... Here is the prtconf -vp output for the Fujitsu card, I uninstalled the driver, installed the Fujitsu driver and then physically removed the SysKonnect card to be sure there is only one Ethernet card. ...
      (comp.unix.solaris)
    • Re: Direct ethernet
      ... > the Internet and another computer. ... Find the correct driver/module for your ethernet card. ... In the case of the 3com card listed earlier, the driver I'm interested ...
      (Debian-User)