Re: 3C2000-T Gigabit Ethernet Card

From: Serge de Souza (serge.de.souza_at_gmail.com)
Date: 05/26/05

  • Next message: Richard Crawford: "Re: Pilot sync/usb question" 
    Date: Thu, 26 May 2005 13:52:01 +0800
To: For users of Fedora Core releases <fedora-list@redhat.com>

    Serge de Souza wrote:
    > Try using sk98lin, that works with 3c2000 not sure what the difference
    > with a 3c2000-T is.
    >
    > Serge

    <taken from top posted reply to digest message>
    Hello Serge!
    I'm using this driver.. but, I've not success to use ethtool or mii-tool
    to configure and have sure about my real link speed, I'm believing that
    I'm working with no total performance.. gigabit.. and more.. because a
    not so good configuration.. I'm not getting success to monitor this
    machine with MRTG.. would you have some suggestion?

    Thanks since now!

    TAF
    </taken from top posted reply to digest message>

    Please try to reply to the email I sent and not the one in the digest,
    and please do not top-post.

    On my side mii-tool and ethtool do not work on this card either:

    # mii-tool
    SIOCGMIIPHY on 'eth0' failed: Bad address
    no MII interfaces found

    # ethtool eth0
    Settings for eth0:
    No data available

    My guess is that the kernel driver does not support these. I thought
    there was a driver supplied by 3com but could not really find it on
    their website (not even the one for the 2.4 you mentioned). There is a
    driver on the SysKonnect website (the guys who provide the chipset for
    the NIC) and that one supports ethtool you may want to try that one, but
    do so at your own risk :)
    http://www.syskonnect.com/syskonnect/support/driver/d0102_driver.html

    I am not sure about the the MRTG part. I don't think snmp requires the
    MII interface.

    Boa sorte
    Serge 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: Richard Crawford: "Re: Pilot sync/usb question"

    Relevant Pages

    • Re: libata in 2.4.24?
      ... IDE disks report immediate success even before the ... The way CONFIG_IDE (the traditional IDE driver) and libata work right ... > until the write hits disk. ...
      (Linux-Kernel)
    • Re: RASN Discussion Topics
      ... Success Is Slow to Come - New York Times ... he must at least have some degree of talent to be in a Cup car. ... On the other hand, he *has* been driving with what is essentially the family team, and more so, was the only marketable driver on said team for quite some time. ...
      (rec.autos.sport.nascar)
    • PATCH: ethtool power manglement hooks
      ... Several ethernet drivers have been broken by the ethtool support because ... the ioctl code used to power the interface up and down as needed. ... via-velocity driver pm/ethtool logic a great deal. ...
      (Linux-Kernel)
    • Re: Is IoStatus.Status reliable?
      ... > I take it you were thinking of informational type messages not warning? ... The status is what the lower driver provided (I'm assuming drivers ... NT_SUCCSS returns true for either SUCCESS or WARNING class messages, ...
      (microsoft.public.win32.programmer.kernel)
    • Re: FC3, Sharp MM20, Synaptics touch pad
      ... > Thanks for responding Satish. ... > I tried the included driver without success. ... > but after a reboot this node is also gone again. ...
      (Fedora)