HELP! iSCSI qla4010 HBA driver problems.

From: Jimmy McMillan (jimmy_at_freshstation.org)
Date: 05/31/05

  • Next message: Oisin Mulvihill: "making a custom fedora distro..." 
    Date: Tue, 31 May 2005 09:49:03 -0400
To: For users of Fedora Core releases <fedora-list@redhat.com>

    I've been working on getting the drivers from qlogic's website (QLA4010)
    to work on a Dell Poweredge 2800, with the newest kernel 2.6.11-27 with
    no luck. My log's are getting filled with mailbox_command errors. The
    drivers are compiled, and I can actually mount an iscsi device and
    read/write to it, but eventually (5-10 minutes) it will fail, and
    continuously give me the included errors. I've contacted qlogic, and
    their response time has been far from satisfactory (I haven't heard from
    them in 5-6 days)

    If anyone can help in anyway, please do... I'm dieing here ;)

    scsi1: qla4xxx_mailbox_command: Trying to execute a mailbox request,
    while another one is interrupting
    Service existing interrupt first
    scsi1: qla4xxx_mailbox_command: **** FAILED, cmd = 00000069, sts =
    00000000 ****
    0x00 mailbox[0] = 0x00004000
    0x04 mailbox[1] = 0x00000001
    0x08 mailbox[2] = 0x00040002
    0x0C mailbox[3] = 0x00000010
    0x10 mailbox[4] = 0x00000001
    0x14 mailbox[5] = 0x00000000
    0x18 mailbox[6] = 0x00000000
    0x1C mailbox[7] = 0xFFFFAD37
    0x20 flash_address = 0x00057DFF
    0x24 flash_data = 0x000000FF
    0x28 ctrl_status = 0x00000040
    0x2C nvram = 0x00000008
    0x38 req_q_in = 0x00000000
    0x3C rsp_q_out = 0x00000000
    0x50 ext_hw_conf = 0x00001916
    0x58 port_ctrl = 0x00000C1F
    0x5C port_status = 0x0001C61D
    0x80 req_q_out = 0x00000000
    0xE0 gp_out = 0x00000003
    0xE4 gp_in = 0x0000000E
    0xFC port_err_status = 0x00000000
    scsi1: qla4extioctl_query_hba_iscsi_portal: MBOX_CMD_GET_FW_STATE failed
    w/ status 0000 

    -- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
  • Next message: Oisin Mulvihill: "making a custom fedora distro..."

    Relevant Pages

    • Re: problems with ATI FireGL V3100 and SUSE 9.1
      ... "no kernel module build environment", ... Then build the drivers for your kernel: ... To install and configure the driver go here and continue from step 3 ... > Yes the drivers are out, but I have not had any luck getting them to install ...
      (alt.os.linux.suse)
    • Re: ACPI Error under 2.6.26-rc*
      ... and attach the rsdp for all of the three cases (good, ACPI Error, ... could you please attach the dmesg output of a 2.6.25.10 kernel which has ... # IPVS transport protocol load balancing support ... # Device Drivers ...
      (Linux-Kernel)
    • 2.6.25 Regression: DriveStatusError
      ... I tried all -git Kernels since begining of cycle and starting when they finaly ... Root is on a raid1 using a IDE Samsung SP1614N as hda and a SATA Samsung ... Kernel driver in use: VIA_IDE ... # AX.25 network device drivers ...
      (Linux-Kernel)
    • Re: [GIT PATCH] ACPI patches for 2.6.25-rc0 (#2)
      ... ACPI: add newline to printk ... SMP ... Kernel panic - not syncing: ... # Infrared-port device drivers ...
      (Linux-Kernel)
    • Re: Why is /sys/class/power_supply/CMB1/energy_now not exported?
      ... [fixing bad linux kernel mailing list email address - sorry, ... # IPVS transport protocol load balancing support ... # Core Netfilter Configuration ... # AX.25 network device drivers ...
      (Linux-Kernel)