Re: network restart (after this: only localhost up)

From: Qrueh_h=E4n=E4=22?= (rueh_at_gmx.net)
Date: 07/04/05

  • Next message: Dan Track: "sony vaio laptop and fc4"
    Date: Mon, 4 Jul 2005 15:56:54 +0200 (MEST)
    To: mnisay <mnisay@aim-consultants.com>, For users of Fedora Core releases <fedora-list@redhat.com>
    
    

    > what does the log says when you are doing the restart ?

    The log says nothing, but i found the solution. I dont know why, but my
    network start script was wrong in some cases. I simply copied the network
    scriopt from another fedora core host and now it works.

    Anyway thank you all for help!

     
    >
    > ----- Original Message -----
    > From: ""rueh hänä"" <rueh@gmx.net>
    > To: "For users of Fedora Core releases" <fedora-list@redhat.com>
    > Sent: Monday, July 04, 2005 2:17 PM
    > Subject: Re: network restart (after this: only localhost up)
    >
    >
    > >I disabled NetworkManager and rebooted the system(btw: FC4). But the
    > >problem
    > > is still not solved. I still have to manually start the interfaces with
    > > ifup. I think i will change to FC3. This seems to be more useful, when
    > the
    > > server goes to the active environment.
    > >
    > >
    > >> rueh hänä wrote:
    > >>
    > >> | ok. The NetworkManager is not running. First I made a service
    > >> NetworkManager
    > >> | stop, then a start. And now, i have again to directly go to the
    > server
    > >> for
    > >>
    > >> If I were you I would throw NetworkManager away. AIUI it only makes
    > >> sense when you share Wifi and Wired networks on a laptop, for example.
    > >> I have seen it perform all kinds of outrages and connection-destroying
    > >> antics, although apparently those bugs are fixed now. However if you
    > >> are on FC3, that can be the whole problem right there.
    > >>
    > >> service NetworkManager stop
    > >> chkconfig NetworkManager off
    > >>
    > >> | DEVICE=eth0
    > >> | BOOTPROTO=none
    > >> | BROADCAST=192.108.234.255
    > >> | HWADDR=00:12:79:3D:A3:E4
    > >> | IPADDR=192.108.234.167
    > >> | NETMASK=255.255.255.0
    > >> | NETWORK=192.108.234.0
    > >> | ONBOOT=yes
    > >> | TYPE=Ethernet
    > >> | GATEWAY=192.108.234.50
    > >>
    > >> Looks reasonable to me.
    > >>
    > >> | There is no modules.conf, but a modprobe.conf:
    > >>
    > >> My error, you have it right.
    > >>
    > >> | alias eth0 tg3
    > >> | alias eth1 tg3
    > >> | alias usb-controller ohci-hcd
    > >> |
    > >> | ifconfig -a:
    > >> |
    > >> | eth0 Link encap:Ethernet HWaddr 00:12:79:3D:A3:E4
    > >> | inet addr:192.108.234.167 Bcast:192.108.234.255
    > >> | Mask:255.255.255.0
    > >> | inet6 addr: fe80::212:79ff:fe3d:a3e4/64 Scope:Link
    > >> | UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    > >> | RX packets:12226 errors:0 dropped:0 overruns:0 frame:0
    > >> | TX packets:2644 errors:0 dropped:0 overruns:0 carrier:0
    > >> | collisions:0 txqueuelen:1000
    > >> | RX bytes:986829 (963.7 KiB) TX bytes:599795 (585.7 KiB)
    > >> | Interrupt:169
    > >> |
    > >> | eth1 Link encap:Ethernet HWaddr 00:12:79:3D:A3:E5
    > >> | inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0
    > >> | inet6 addr: fe80::212:79ff:fe3d:a3e5/64 Scope:Link
    > >> | UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    > >> | RX packets:17362 errors:0 dropped:0 overruns:0 frame:0
    > >> | TX packets:16538 errors:0 dropped:0 overruns:0 carrier:0
    > >> | collisions:0 txqueuelen:1000
    > >> | RX bytes:7349877 (7.0 MiB) TX bytes:4585190 (4.3 MiB)
    > >> | Interrupt:177
    > >>
    > >> All looks happy. Try stopping NetworkManager even starting with the
    > >> chkconfig shown above and rebooting.
    > >>
    > >> - -Andy
    > >> -----BEGIN PGP SIGNATURE-----
    > >> Version: GnuPG v1.4.1 (GNU/Linux)
    > >> Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
    > >>
    > >> iD8DBQFCyTRrjKeDCxMJCTIRAi4DAJ4zi02nOQYV75A3FBIbxFMPxbdb7ACcD8fj
    > >> UYDkTLm9iwZjmshUo95c66Y=
    > >> =883m
    > >> -----END PGP SIGNATURE-----
    > >>
    > >> --
    > >> fedora-list mailing list
    > >> fedora-list@redhat.com
    > >> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    > >>
    > >
    > > --
    > > 5 GB Mailbox, 50 FreeSMS http://www.gmx.net/de/go/promail
    > > +++ GMX - die erste Adresse für Mail, Message, More +++
    > >
    > > --
    > > fedora-list mailing list
    > > fedora-list@redhat.com
    > > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    > >
    > >
    >
    >
    > --
    > fedora-list mailing list
    > fedora-list@redhat.com
    > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    >

    -- 
    5 GB Mailbox, 50 FreeSMS http://www.gmx.net/de/go/promail
    +++ GMX - die erste Adresse für Mail, Message, More +++
    -- 
    fedora-list mailing list
    fedora-list@redhat.com
    To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    

  • Next message: Dan Track: "sony vaio laptop and fc4"

    Relevant Pages

    • Re: SCO 5.0.7 MP5 network hung up
      ... instead of the server I was reloading. ... restarted syslogd or issued kill -1 to the syslogd pid and it shows the ... syslogd restart at that time. ... network from the NIC on IRQ10 to IRQ11 to get it off IRQ10 used by the Adaptec ...
      (comp.unix.sco.misc)
    • Re: Can not conect to server shares or join domain
      ... I unistalled Spybot SD and Virtual Box. ... I dont think it was spybot i think it was ... I have a win2003 server setup in a domain. ... rebooted the server and the same thing i keep getting error Network Path ...
      (microsoft.public.windowsxp.network_web)
    • Re: I have a Windows 2003 server that is unable to communicate with the domain controller
      ... Sounds A network connectivity or configuration problem follow these steps: ... 3- At the command prompt, type gpupdate, and then check Event Viewer to see ... Windows 2000 Server or Windows Server 2003 with Active Directory ... Please restart your computer for the changes to take affect'. ...
      (microsoft.public.win2000.active_directory)
    • Re: Applying computer setting on Server 2003 take ages!
      ... What happens if you disconnect the network and restart? ... How big are your exchange databases and how much space is on the system drive available? ... I have a very annoying issue with one of my server - Mail Server ...
      (microsoft.public.windows.server.setup)
    • The DNS server was unable to open the Active Directory
      ... I forced a restart um my GC with Windows 2003, ... After that the server restarted, taking too long in the Preparing Network ... I'm unable to open network connections. ...
      (microsoft.public.windows.server.dns)

    Loading