SAMBA Authentication Problem

• Previous message: Paul Howarth: "Re: swapon not working"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

To: fedora-list@redhat.com
Date: Mon, 25 Jul 2005 21:29:03 +1000

Hi All,
I recently tried to get my linux FC4 laptop to be accessible on our
University's Windows network.

I am visible on the network by Windows machines but when users attempt
to log onto my computer to view my shared files (which are read-only) it
asks for a username and password.

I am presuming from this that I have made an error with the set-up of
the guest account or allowing null passwords. If so, would someone be
able to explain how to successfully set-up this guest account.

I have entered my non-root account username and password and it still
won't log-in.

Any help, anyone could provide would be most appreciative.

I have included my samba.conf file

[tony@earlepagestudent-31 fc4]$ cat /etc/samba/smb.conf
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings
=====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
        workgroup = EPCDOMAIN

# server string is the equivalent of the NT Description field
        server string = Samba Server

        auth methods = guest
        null passwords = Yes

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
        hosts allow = 129.180.166. 129.180.176. 127.
        interfaces = eth0 lo
        bind interfaces only = Yes
        netbios name = tony

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
        printcap name = /etc/printcap
        load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = cups

# This option tells cups that the data has already been rasterized
        cups options = raw

# Uncomment this if you want a guest account, you must add this
to /etc/passwd
# otherwise the user "nobody" is used
; guest account =

# this tells Samba to use a separate log file for each machine
# that connects
        log file = /var/log/samba/%m.log
# all log information in one file
# log file = /var/log/samba/log.smbd

# Put a capping on the size of the log files (in Kb).
        max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
; security = user
# Use password server option only with security = server
; password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n
\n *passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
        socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes

# Preferred Master causes Samba to force a local browser election on
startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be
specified
# the default order is "host lmhosts wins bcast". "host" means use the
unix
# system gethostbyname() function call that will use either /etc/hosts
OR
# DNS or NIS depending on the settings
of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system
configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that
are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
; wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but
NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
        dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no

#============================ Share Definitions
==============================
        idmap uid = 16777216-33554431
        idmap gid = 16777216-33554431
        template shell = /bin/false
        winbind use default domain = no
;[homes]
; comment = Home Directories
; browseable = no
; writeable = yes

# Un-comment the following and create the netlogon directory for Domain
Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no

[shared]
        path = /shared
        browseable = yes
        guest ok = yes
        read only = yes

-- 
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list

• Previous message: Paul Howarth: "Re: swapon not working"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]