Re: Fedora Core 4 & SATA: Installs fine, panics on reboot

From: Fran Fabrizio (fran_at_cis.uab.edu)
Date: 07/29/05

  • Next message: Ping-Wu Zhang: "FC4 on HP ze2000"
    Date: Fri, 29 Jul 2005 16:21:17 -0500
    To: For users of Fedora Core releases <fedora-list@redhat.com>
    
    

    Some more data:

    - I've learned that the GX280 has an Intel ICH6 based SATA chipset.
    (This supposedly implements ACHI.)
    - The same GX280 can install and run FC3 with no problems.
    - Setting the SATA mode to "Combination" from "Normal" in the BIOS had
    no effect.

    Still chugging away at it. Any help/tips much appreciated. Thanks!

    -Fran

    Fran Fabrizio wrote:

    >
    > I just installed FC4 on a new Dell Optiplex GX280. Install went fine
    > onto the drive, which is SATA. On reboot, kernel panicked, unable to
    > find any logical volumes. So, the installed kernel must not have SATA
    > support whereas the kernel that the installer CD boots must have.
    > What's the easiest way to fix this at this point? I've googled and
    > checked this list's archives, but everything I've found thus far
    > related to people who couldn't even install because Fedora's installer
    > could not even find the SATA drive. However, since my install went
    > fine, I appear to have a slightly different problem.
    >
    > Thanks,
    > Fran
    >

    -- 
    Fran Fabrizio
    Senior Systems Analyst
    Department of Computer and Information Sciences
    University of Alabama at Birmingham
    http://www.cis.uab.edu/
    205.934.0653
    -- 
    fedora-list mailing list
    fedora-list@redhat.com
    To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
    

  • Next message: Ping-Wu Zhang: "FC4 on HP ze2000"

    Relevant Pages

    • Re: Install on new M.B.
      ... There is a driver on the manufacturers disk but either I am ... it uses the most recent kernel. ... If the install works, ... A bigger problem than a SATA disk drive is a SATA DVD reader. ...
      (comp.os.linux.hardware)
    • Re: Install on new M.B.
      ... There is a driver on the manufacturers disk but either I am ... it uses the most recent kernel. ... If the install works, ... A bigger problem than a SATA disk drive is a SATA DVD reader. ...
      (comp.os.linux.hardware)
    • Re: SATA drive setup help please.
      ... Anyway, since SATA is faster, I would move/install XP on it - the SATA ... Download and install via Hardware Wizard or Disk ... HDD manufacturer's website should have ... with my drives on the Promise card. ...
      (microsoft.public.windowsxp.basics)
    • Re: adding modules to an initrd image
      ... I am using a SATA HD, which is on a ULI SATA controller. ... > I am able to install to the hard-drive after I load the module ... > When the initrd image tries to pivot_root, kernel panic happens ...
      (Debian-User)
    • Re: SATA with RedHat on Intel S875WP1-E Motherboard with Promise PDC20319
      ... those I had on a Sil3112 controller with 2 SATA drives attached. ... The base problem is that most kernels don't have the SATA controller chip ... It also depends on what was built into the kernel ... On my system (with a later install cd) I could use ...
      (comp.os.linux.hardware)