Configuring Fedora Core 4 & USB Flash drives?
- From: tlhackque <tlhackque@xxxxxxxxx>
- Date: Sat, 31 Dec 2005 05:08:32 -0800 (PST)
I was in a maze of twisty passages, so "help!".
Fedora Core 4. Plug in a USB thumb drive.
Successfully recognized by the
kernel & a SCSI "drive" is created. But it doesn't
get mounted put on the
desktop. CDROMs/DVDs do. I have the
desktop->preferences->removable
drives->{mount drives when hot-plugged, media when
inserted clicked. A
manual mount does work; the device then appears on the
desktop as expected.
So something in the hotplug chain is deciding not to
do the mount. I got
lost in the hal/hotplug/automount scripts. Someone's
been here before.
What's the easiest way to track this down? (Or the
recipe for configuring
this device?)
Details below.
Thanks in advance.
Here's /var/log/messages:
Dec 31 07:51:59 castaway kernel: usb 1-2: new full
speed USB device using
uhci_hcd and address 13
Dec 31 07:51:59 castaway kernel: scsi10 : SCSI
emulation for USB Mass
Storage devices
Dec 31 07:52:04 castaway kernel: Vendor: LEXAR
Model: JUMPDRIVE
Rev: 1.03
Dec 31 07:52:04 castaway kernel: Type:
Direct-Access
ANSI SCSI revision: 01 CCS
Dec 31 07:52:04 castaway kernel: SCSI device sdc:
251904 512-byte hdwr
sectors (129 MB)
Dec 31 07:52:04 castaway kernel: sdc: Write Protect is
off
Dec 31 07:52:04 castaway kernel: sdc: assuming drive
cache: write through
Dec 31 07:52:04 castaway kernel: SCSI device sdc:
251904 512-byte hdwr
sectors (129 MB)
Dec 31 07:52:04 castaway kernel: sdc: Write Protect is
off
Dec 31 07:52:04 castaway kernel: sdc: assuming drive
cache: write through
Dec 31 07:52:04 castaway kernel: sdc: sdc1
Dec 31 07:52:04 castaway kernel: Attached scsi
removable disk sdc at scsi10,
channel 0, id 0, lun 0
Dec 31 07:52:04 castaway scsi.agent[15142]: disk at
/devices/pci0000:00/0000:00:14.2/usb1/1-2/1-2:1.0/host10/target10:0:0/10:0:0
:0
And here's /proc/bus/usb/devices
Dec 31 07:51:59 castaway kernel: usb 1-2: new full
speed USB device using
uhci_hcd and address 13
Dec 31 07:51:59 castaway kernel: scsi10 : SCSI
emulation for USB Mass
Storage devices
Dec 31 07:52:04 castaway kernel: Vendor: LEXAR
Model: JUMPDRIVE
Rev: 1.03
Dec 31 07:52:04 castaway kernel: Type:
Direct-Access
ANSI SCSI revision: 01 CCS
Dec 31 07:52:04 castaway kernel: SCSI device sdc:
251904 512-byte hdwr
sectors (129 MB)
Dec 31 07:52:04 castaway kernel: sdc: Write Protect is
off
Dec 31 07:52:04 castaway kernel: sdc: assuming drive
cache: write through
Dec 31 07:52:04 castaway kernel: SCSI device sdc:
251904 512-byte hdwr
sectors (129 MB)
Dec 31 07:52:04 castaway kernel: sdc: Write Protect is
off
Dec 31 07:52:04 castaway kernel: sdc: assuming drive
cache: write through
Dec 31 07:52:04 castaway kernel: sdc: sdc1
Dec 31 07:52:04 castaway kernel: Attached scsi
removable disk sdc at scsi10,
channel 0, id 0, lun 0
Dec 31 07:52:04 castaway scsi.agent[15142]: disk at
/devices/pci0000:00/0000:00:14.2/usb1/1-2/1-2:1.0/host10/target10:0:0/10:0:0
:0
cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc=118/900 us (13%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.11-1.1369_FC4 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:14.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2
Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=050d ProdID=0912 Rev= 0.06
S: Manufacturer=
S: Product=UPS
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00
Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=248ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 13
Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=05dc ProdID=0080 Rev= 0.01
S: Manufacturer=LEXR PLUG DRIVE
S: Product=LEXR PLUG DRIVE
S:
SerialNumber=000000017999878439400000000000000000000000000
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 90mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
A manual mount does work:
# mount /dev/sdc1 /media/usbdisk
# mount
/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/sda1 on /boot type ext3 (rw)
none on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
automount(pid1738) on /misc type autofs
(rw,fd=4,pgrp=1738,minproto=2,maxproto=4)
automount(pid1788) on /net type autofs
(rw,fd=4,pgrp=1788,minproto=2,maxproto=4)
nfsd on /proc/fs/nfsd type nfsd (rw)
/dev/hda on /media/cdrom type iso9660
(ro,nosuid,nodev,_netdev,user=litt)
/dev/sdc1 on /media/usbdisk type vfat (rw)
---------------------------------------------------------
This communication may not represent my employer's
views,
if any, on the matters discussed.
__________________________________
Yahoo! for Good - Make a difference this year.
http://brand.yahoo.com/cybergivingweek2005/
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
- Follow-Ups:
- Re: Configuring Fedora Core 4 & USB Flash drives?
- From: Charles Curley
- Re: Configuring Fedora Core 4 & USB Flash drives?
- From: Tim
- Re: Configuring Fedora Core 4 & USB Flash drives?
- From: Yue Feng
- Re: Configuring Fedora Core 4 & USB Flash drives?
- Prev by Date: gcc-2.95 on FC4
- Next by Date: Re: gcc-2.95 on FC4
- Previous by thread: gcc-2.95 on FC4
- Next by thread: Re: Configuring Fedora Core 4 & USB Flash drives?
- Index(es):
Relevant Pages
|
|
