dual head on fedora

I was trying to set up a computer with dual head and install an ATI 9250 AGP card and an ATI 9250 PCI card. When I go to display and select Dual Head I can setup the card resolution and Color Depth and the monitor, but even after reboot the second screen still doesn't show anything. It just stays blank. Is there anything else I should look at.

following is xorg.conf
--------------------------------------------
# Xorg configuration created by system-config-display

Section "ServerLayout"
   Identifier     "Multihead layout"
   Screen      0  "Screen0" LeftOf "Screen1"
   Screen      1  "Screen1" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
   Option        "Xinerama" "on"
   Option        "Clone" "off"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
   Load  "dbe"
   Load  "extmod"
   Load  "fbdevhw"
   Load  "glx"
   Load  "record"
   Load  "freetype"
   Load  "type1"
   Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option    "Xleds"        "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    Option    "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option    "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option    "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option    "XkbLayout"    "de"
# or:
#    Option    "XkbLayout"    "de"
#    Option    "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option    "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#    Option    "XkbOptions"    "ctrl:nocaps"
#
   Identifier  "Keyboard0"
   Driver      "kbd"
   Option        "XkbModel" "pc105"
   Option        "XkbLayout" "us"
EndSection

Section "InputDevice"
   Identifier  "Mouse0"
   Driver      "mouse"
   Option        "Protocol" "IMPS/2"
   Option        "Device" "/dev/input/mice"
   Option        "ZAxisMapping" "4 5"
   Option        "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
   Identifier   "Monitor0"
   VendorName   "Monitor Vendor"
   ModelName    "G810-5"
   DisplaySize  410    300
   HorizSync    30.0 - 97.0
   VertRefresh  50.0 - 180.0
   Option        "dpms"
EndSection

Section "Monitor"
   Identifier   "Monitor1"
   VendorName   "Monitor Vendor"
   ModelName    "KDS Visual Sensations VS-190/VS-195e/VS-195i"
   HorizSync    30.0 - 95.0
   VertRefresh  50.0 - 120.0
   Option        "dpms"
EndSection

Section "Device"
   Identifier  "Videocard0"
   Driver      "radeon"
   VendorName  "Videocard vendor"
   BoardName   "ATI Radeon 9200PRO"
EndSection

Section "Device"
   Identifier  "Videocard1"
   Driver      "radeon"
   VendorName  "Videocard Vendor"
   BoardName   "ATI Radeon 9200PRO"
   BusID       "PCI:1:0:0"
   Screen      1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
   Identifier "Screen1"
   Device     "Videocard1"
   Monitor    "Monitor1"
   DefaultDepth     16
   SubSection "Display"
       Viewport   0 0
       Depth     16
       Modes    "1400x1050"
   EndSubSection
EndSection

Section "DRI"
   Group        0
   Mode         0666
EndSection


--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list