Re: [Solved - of sorts] CUPS printing problems



Hi,
E.g. to allow
Normal CUPS admin is done thru the web interface. Additional management
is done via the lpadmin command. Other than that, to manage network
access use the hosts.allow to manage network access. To fine tune access
use the directives found in cupsd.conf file.

------------------------------
Jeff Vian wrote:
In each of the location stanzas of the type above I added another
"Allow From x.x.x.x" line with the IP of the remote workstation.
Now when I restarted cupsd I can print from the remote workstation.

This is at best a work-around and I need to find out why it cannot be
configured this way using the cups interface (or file a bug because it
cannot).

My conclusion when modifying CUPS some time ago
was that I could _not_ make all necessary changes
through the web interface.
I had to make some modifications "by hand" in /etc/cups/ .

I'd be interested to know if I was correct.

--

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list



Relevant Pages

  • NAS drive and LANMan98
    ... I have just purchased a 200GB Network Attached Storage (NAS) drive part No. ... HD9-U2LA which has a web interface for config. ... access it via FTP under RO. ...
    (comp.sys.acorn.networking)
  • Re: [Solved - of sorts] CUPS printing problems
    ... Now when I restarted cupsd I can print from the remote workstation. ... allow any thing but the localhost to print to my printers by cups. ... to connect I am able to print from other machines on my local network. ... It seems the cups web interface only is designed to configure local ...
    (Fedora)
  • Re: Help with Motorola SB5120
    ... If they work in the same office as you, and are on the same LAN that you're on, then talk to your network admin or your boss about what they're doing. ... You can do whatever you want on your side of the network, but I haven't seen any cablemodems that allow you to change the IP address of their web interface. ... If I can monitor the cable modem to graph the traffic statitistics using SNMP, shouldn't I be able to set the read community string to something other than the default of "public"? ...
    (comp.dcom.modems.cable)
  • Re: Downloads fine but get error 80072EFD on install
    ... > the sites on our Local network it seems not to see the local server, ... DNS address to give addressability to your local nameserver. ... I can't tell what portal you are using with your web interface ... OE users could use this even if they didn't already have a news server ...
    (microsoft.public.windowsupdate)
  • Re: OE6 Database corrupt?
    ... "I stick with the web interface all the time. ... Errors in the network would hardly eradicate ... it less irritating with the web interface if I wasn't on ... I can use with my state-of-the-art Windows XP setup... ...
    (microsoft.public.windows.inetexplorer.ie6_outlookexpress)