Re: Adaptec 1210SA problem (with installation) [SOLVED]

Some hours after and many googling ... 1210SA don't support native raid, its implemented with driver (under Windows) and with software raid under linux.

Thanks

Samuel Díaz García escribió:
I have a machine (p4 1,6GHz) with an adaptec 1210sa controller with 2x80Gb harddisk.

I configured the controller to make a hardware mirror raid, but when install FC5 it detect my primary IDE harddisk (/dev/hda) and the 2 harddisk in the 1210sa controller (sda and sdb).

I want to have a transparent mirror, not software mirror with this controller.

Under this problem, my workaround is install FC5 only under hda, and after "yum update" configure the controller.

I have on this many questions:
1) Will work the 1210sa controller as a harddisk after the update?
2) I'll need some kernel parameters (or module parameters) to allow the device work as only one hard disk (with a working mirror).
3) Is there any known bug with FC5 and adaptec 1210sa controller? and any work around with this?

Thanks


--
Samuel Díaz García
Director Gerente
ArcosCom Wireless, S.L.L.

CIF: B11828068
c/ Romero Gago, 19
Arcos de la Frontera
11630 - Cadiz

http://www.arcoscom.com

mailto:samueldg@xxxxxxxxxxxx
msn: samueldg@xxxxxxxxxxxx

Móvil: 651 93 72 48
Tlfn.: 956 70 13 15
Fax: 956 70 34 83

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

Relevant Pages

  • Re: PowerEdge 1800 Spontaneous Reboots
    ... Gregory Orton: SBS Admin wrote: ... 160GB SATA non RAID setup back into a RAID 1 mirror? ... simple as plugging them both in, and telling the raid controller to ...
    (microsoft.public.windows.server.sbs)
  • Adaptec 1210SA problem (with installation)
    ... I configured the controller to make a hardware mirror raid, but when install FC5 it detect my primary IDE harddisk and the 2 harddisk in the 1210sa controller. ...
    (Fedora)
  • SATA and RIAD 1
    ... I'm wondering if you actually have a hardware raid ... if you have a hardware raid controller. ... two SATA WD 74GB drives that I wanted to mirror in RAID 1. ...
    (microsoft.public.windows.server.sbs)
  • Re: Migrating to RAID 1
    ... you would not have to use an image to install the finished product onto the new RAID if you had introduced the driver first. ... yes it is a SATA RAID Controller, ... Once the driver is installed and the card is recognized by Windows, you should be able to add the SATA or SAS drives and mirror them according to the mfg instructions, then image your system drive to the RAID attached to the controller. ...
    (microsoft.public.windows.server.sbs)
  • Re: Raid 0 (Mirroring) - Help?
    ... RAID 0 is not mirroring. ... Move the drive to the same controller. ... Using two drives on the same ... > mirror section on HD 2 and begins to sync. ...
    (microsoft.public.windows.server.sbs)