Re: MS Windows through QEMU
- From: Jack Gates <jlgates@xxxxxxxxxxx>
- Date: Sun, 3 Sep 2006 14:53:53 -0400
On Friday 01 September 2006 11:34, Craig White wrote:
On Fri, 2006-09-01 at 14:42 +0100, Paul Howarth wrote:
Jack Gates wrote:
What does this mean and what should I do with it?
Could not configure '/dev/rtc' to have a 1024 Hz timer. This is
not a fatal
error, but for better emulation accuracy either use a 2.6 host
Linux kernel or
type 'echo 1024 > /proc/sys/dev/rtc/max-user-freq' as root.
Could not open '/dev/kqemu' - QEMU acceleration layer not
activated
Have you tried doing what it suggests?
# echo 1024 > /proc/sys/dev/rtc/max-user-freq
If that works for you, you'll probably want to add the command to
/etc/rc.d/rc.local so that it gets set at boot time.
----
just out of curiosity...wouldn't it make more sense to put
dev.rtc.max-user-freq = 1024
into /etc/sysctl.conf instead?
I don't understand what the above means or what it will do.
Also, I have done this as described here
http://kidsquid.com/cgi-bin/moin.cgi/QuickStartGuide
qemu-img create -f qcow c.img 3G
qemu -cdrom /dev/cdrom -hda c.img -m 256 -boot d
MS Windows installed, I exited and did this
qemu -hda c.img -m 256
now I get this without the VM starting:
QEMU PC emulator version 0.8.1, Copyright (c) 2003-2005 Fabrice
Bellard
usage: qemu [options] [disk_image]
'disk_image' is a raw hard image image for IDE hard disk 0
Standard options:
-M machine select emulated machine (-M ? for list)
-fda/-fdb file use 'file' as floppy disk 0/1 image
-hda/-hdb file use 'file' as IDE hard disk 0/1 image
-hdc/-hdd file use 'file' as IDE hard disk 2/3 image
-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
-boot [a|c|d] boot on floppy (a), hard disk (c) or CD-ROM (d)
-snapshot write to temporary files instead of disk image files
-m megs set virtual RAM size to megs MB [default=128]
-smp n set the number of CPUs to 'n' [default=1]
-nographic disable graphical output and redirect serial I/Os to
console
-k language use keyboard layout (for example "fr" for French)
-audio-help print list of audio drivers and their options
-soundhw c1,... enable audio support
and only specified sound cards (comma separated list)
use -soundhw ? to get the list of supported cards
use -soundhw all to enable all of them
-localtime set the real time clock to local time [default=utc]
-full-screen start in full screen
-win2k-hack use it when installing Windows 2000 to avoid a disk
full bug
-usb enable the USB driver (will be the default soon)
-usbdevice name add the host or guest USB device 'name'
Network options:
-net nic[,vlan=n][,macaddr=addr][,model=type]
create a new Network Interface Card and connect it to
VLAN 'n'
-net user[,vlan=n][,hostname=host]
connect the user mode network stack to VLAN 'n' and
send
hostname 'host' to DHCP clients
-net tap[,vlan=n][,fd=h][,ifname=name][,script=file]
connect the host TAP network interface to VLAN 'n' and
use
the network script 'file' (default=/etc/qemu-ifup);
use 'fd=h' to connect to an already opened TAP
interface
-net socket[,vlan=n][,fd=h][,listen=[host]:port][,connect=host:port]
connect the vlan 'n' to another VLAN using a socket
connection
-net socket[,vlan=n][,fd=h][,mcast=maddr:port]
connect the vlan 'n' to multicast maddr and port
-net none use it alone to have zero network devices; if no -net
option
is provided, the default is '-net nic -net user'
-tftp prefix allow tftp access to files starting with prefix [-net
user]
-smb dir allow SMB access to files in 'dir' [-net user]
-redir [tcp|udp]:host-port:[guest-host]:guest-port
redirect TCP or UDP connections from host to guest
[-net user]
Linux boot specific:
-kernel bzImage use 'bzImage' as kernel image
-append cmdline use 'cmdline' as kernel command line
-initrd file use 'file' as initial ram disk
Debug/Expert options:
-monitor dev redirect the monitor to char device 'dev'
-serial dev redirect the serial port to char device 'dev'
-parallel dev redirect the parallel port to char device 'dev'
-pidfile file Write PID to 'file'
-S freeze CPU at startup (use 'c' to start execution)
-s wait gdb connection to port 1234
-p port change gdb connection port
-d item1,... output log to /tmp/qemu.log (use -d ? for a list of
log items)
-hdachs c,h,s[,t] force hard disk 0 physical geometry and the
optional BIOS
translation (t=none or lba) (usually qemu can guess
them)
-L path set the directory for the BIOS and VGA BIOS
-no-kqemu disable KQEMU kernel module usage
-std-vga simulate a standard VGA card with VESA Bochs
Extensions
(default is CL-GD5446 PCI VGA)
-loadvm file start right away with a saved state (loadvm in
monitor)
-vnc display start a VNC server on display
During emulation, the following keys are useful:
ctrl-alt-f toggle full screen
ctrl-alt-n switch to virtual console 'n'
ctrl-alt toggle mouse and keyboard grab
When using -nographic, press 'ctrl-a h' to get some help.
so what is missing or what am I doing wrong?
--
Jack Gates http://www.morningstarcom.net
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
- Follow-Ups:
- Re: MS Windows through QEMU
- From: Jack Gates
- Re: MS Windows through QEMU
- References:
- Re: MS Windows through QEMU
- From: Paul Howarth
- Re: MS Windows through QEMU
- From: Craig White
- Re: MS Windows through QEMU
- Prev by Date: Re: Starting dhcpd
- Next by Date: Re: How to manage modules loaded on boot
- Previous by thread: Re: MS Windows through QEMU
- Next by thread: Re: MS Windows through QEMU
- Index(es):
Relevant Pages
|
