Re: TV out ( SOLVED )
- From: redhatdude@xxxxxxxxxxxxx
- Date: Thu, 14 Sep 2006 16:47:06 -0400
On Sep 14, 2006, at 3:45 PM, Tod Merley wrote:
On 9/14/06, redhatdude@xxxxxxxxxxxxx <redhatdude@xxxxxxxxxxxxx> wrote:Hi again Ej!
On Sep 14, 2006, at 6:20 AM, Tod Merley wrote:
> On 9/13/06, redhatdude@xxxxxxxxxxxxx <redhatdude@xxxxxxxxxxxxx> wrote:
>> Hi,
>> I have a small TV that I'd like to connecto to my FC5 box to monitor
>> the apache and ftp logs. I plugged it into the s-video connector in
>> the back and all I get is a blue screen on the TV. Would someone tell
>> me how to accomplish this, or point me to a how to on the web?
>> My video card is integrated and shares memory with the computer. It's
>> an ATI 9100.
>> Thanks in advance.
>> EJ
>>
>> --
>> fedora-list mailing list
>> fedora-list@xxxxxxxxxx
>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora- list
>>
> Hi Ej,
>
> 1. Download the manual from the ATI site (ok, the 9200 is available -
> probably close enough).
>
> 2. Understand your TVs inputs and your ATI card outputs and which cord
> you need to properly connect the two. This must be right.
>
> 3. Check to see that your driver (Linux drivers available on the ATI
> site) is compatable with the video output feature you desire using
> your particular X version. I understand there are some issures with
> the most current drivers (ATI site).
>
> 4. From your Video Card Control Panel (should have installed this when
> installing the driver) see that the "enable video out" is enabled.
>
> Have fun!
>
> Tod
>
> Google is our friend.
>
> --
> fedora-list mailing list
> fedora-list@xxxxxxxxxx
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Solved.
I downloaded the linux drivers from ATI website. The rpm they have
didn't work since it's missing a dependency that yum doesn't install.
So I downloaded the 40 mb installer and ran it.
I did the following in the terminal.
aticonfig --help ( This explains how to setup your driver for a tv )
aticonfig --initial
aticonfig --enable-monitor=tv --tv-standard-type=VIDEO
and that's it. Start kdm from the console.
Selinux needs to be disabled or a new policy created that allows the
driver to function. Otherwise X doesn't start.
EJ
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Thanks for the report. I recently picked up a 16MB video card at a
used shop (about $3 if I recall) and it has video in/out. I now enjoy
the increased screen resolution (1280x1024 @ 32bits) and after this
exchange will find a cord to test the video out. We have a new
camcorder and so the video in may prove useful (USB already is
useful).
SELinux is certainly on my reading/learning list! Here is a starter I
found on the web:
http://www.linuxtopia.org/online_books/writing_SELinux_policy_guide/ index.html
Enjoy!
Tod
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
I forgot to mention that you should also apply the following.
aticonfig --force-monitor=tv
kill and restart kdm for it to take effect.
As to selinux, enter the following in the terminal:
# /usr/sbin/semanage fcontext -a -t textrel_shlib_t /usr/lib/xorg/ modules/drivers/fglrx_drv.so
# /sbin/restorecon -v /usr/lib/xorg/modules/drives/fglrx_drv.so
Set it back to enforce if it wasn't. Kill kdm. Reconfigure your X with aticonfig. Start kdm, it should work with selinux now.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
- Follow-Ups:
- Re: TV out ( SOLVED )
- From: redhatdude
- Re: TV out ( SOLVED )
- References:
- TV out
- From: redhatdude
- Re: TV out
- From: Tod Merley
- Re: TV out
- From: redhatdude
- Re: TV out
- From: Tod Merley
- TV out
- Prev by Date: Re: how to send an e-mail --- (a problem!)
- Next by Date: Re: Mysterious problem with sendmail
- Previous by thread: Re: TV out
- Next by thread: Re: TV out ( SOLVED )
- Index(es):
Relevant Pages
|
