Re: FreeNX on FC6 authentication problem
- From: "Art Fore" <art.fore@xxxxxxxxx>
- Date: Thu, 16 Nov 2006 09:52:45 +0800
Tried this Thomas, there was no change. As far as the log files, nothing
shows up in /var/log/messages.
With UsePAM=no in /etc/ssh/sshd.conf I get accepted publickey for nx from
10.18.32.29 port 3441 ssh2.
With UsePAM-yes in /etc/ssh/sshd.conf I get accepted publickey for nx from
10.18.32.29 port 3441 ssh2
pam_unix(sshd:session): session opened for user nx by (uid=0)
pam_unix(sshd:session): session closed for user nx
On 11/16/06, Thomas von Steiger <thomas.vonsteiger@xxxxxxxxxx> wrote:
--
I use for nx:
-yum install nx freenx
- install gnome kde or xfce(startup in nxclient with /usr/bin/startxfce4)
NX Config File::/etc/nxserver/node.conf
ENABLE_PERSISTENT_SESSION="all"
NX_LOG_LEVEL=6
NX_LOG_SECURE=1
NX_LOGFILE=/var/log/nxserver.log
SESSION_HISTORY=2592000
COMMAND_NETCAT=nc
SESSION_LOG_CLEAN=0
Define nxclient config and load
/var/lib/nxserver/home/.ssh/client.id_dsa.key into nxclient as key
Ready.
Thomas
------------------------------
*Von:* fedora-list-bounces@xxxxxxxxxx [mailto:
fedora-list-bounces@xxxxxxxxxx] *Im Auftrag von *Art Fore
*Gesendet:* Mittwoch, 15. November 2006 10:10
*An:* For users of Fedora
*Betreff:* Re: FreeNX on FC6 authentication problem
On 11/15/06, *Craig White* <craigwhite@xxxxxxxxxxx> wrote:
On Wed, 2006-11-15 at 12:16 +0800, Art Fore wrote:
>
>
> On 11/15/06, Craig White <craigwhite@xxxxxxxxxxx> wrote:
> On Wed, 2006-11-15 at 10:58 +0800, Art Fore wrote:
> >
> >
> > On 11/14/06, Dr. Michael J. Chudobiak <mjc@xxxxxxxxxxxxxxx>
> wrote:
> >
> >
> > Art, here are some tips:
> >
> > 1) In the past, I found I had to run "passwd -uf nx"
> to enable
> > the nx
> > user. The rpm didn't do it properly for some reason.
> >
> > 2) Make sure the client enables SSL encryption.
> >
> > 3) The rpm didn't uninstall properly, which really
> messed
> > things up. If
> > you try to uninstall it, use rpm -evvv to get a
> verbose output
> > to see
> > which files are causing trouble.
> >
> > Done the passwd -uf nx which reported success. SSL
> encription is
> > enabled. Still no luck. Client comes back with
> > NX> 202 Authenticating user: nx
> > NX> 208 Using auth method: publickey
> > NX> 204 Authentication failed.
> >
> > Log file on server has Received signal 15, terminating.
> >
> > So, any further suggestions?
> ----
> get the file
> /etc/nxserver/client.id_dsa.pub
> from the server
>
> paste it into the key on the client
>
> Copied the file to c:/documents and settings/art.fore/.ssh and .nx and
> to c:\program files\nx client for windows\share\keys. Now the client
> comes up with the same error, the server log only comes up with
> connection closed by MailScanner warning: numerical links are often
> malicious:10.18.31.29 (client IP address)
>
> What next?
----
keep failing until you follow instructions I would suppose
Craig
Well, I followed instructions as best I could given that they were rather
sparse. I uninstalled everything and reinstaleld and started over with the
website instractions mentioned earlier, which by the way have errors and got
to the same point as before. I did find that importing the
client.id_dsa.pub with the import button on the client, configure, general
tab got me to where nx now authenticates, but now my login with my user name
and password does not authenticate and I am using the correct name and
password. What key or file controls this and how do I get nx to find it? is
it one of the keys generated before? If so, which one? I am not at all clear
on these keys as there is no real explanation of what is for what. (I also
get the same thing from an nxclient on the server)
Art
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
- References:
- Re: FreeNX on FC6 authentication problem
- From: Art Fore
- AW: FreeNX on FC6 authentication problem
- From: Thomas von Steiger
- Re: FreeNX on FC6 authentication problem
- Prev by Date: Microsoft, Linux, RH and patents....
- Next by Date: Re: Unersolved issues with FC6?
- Previous by thread: AW: FreeNX on FC6 authentication problem
- Next by thread: Sed in Script problem using expr
- Index(es):
Relevant Pages
|
