Re: root disk moves from PATA to SATA



Verily I say unto thee, that Florin Andrei spake thusly:

I'm running FC6 on an AthlonXP system. I am planning to upgrade the
hardware to an Athlon 64 Dual Core. The new motherboard has SATA
connectors for the hard-drives (also has a PATA connector but that will
be used for the DVD writer).

I am planning to keep the existing PATA hard-drive and not reinstall FC6
(I will upgrade to FC7 when it comes out), but instead I'll use a
SATA-PATA adapter between drive and mobo. The problem, of course, is
that PATA is /dev/hda while SATA will be /dev/sda

I think /etc/fstab is fine and doesn't need any update, as long as it's
using disk labels.

But how about grub.conf? Do I need to change (hd0,0) to something else?
I see it's using labels for pretty much everything else.

GRUB does not distinguish between PATA, SATA, or SCSI, but you'll need
to keep the same BIOS boot order or change GRUB accordingly.

/dev/hda1 = (hd0,0)
/dev/sda1 = (hd0,0)
/dev/hda2 = (hd0,1)
/dev/sda2 = (hd0,1)
/dev/hdb1 = (hd1,0)
/dev/sdb1 = (hd1,0)
/dev/hdb2 = (hd1,1)
/dev/sdb2 = (hd1,1)
etc.

Also your /etc/modprobe.conf and /etc/X11/xorg.conf will need updating
if you change mobos, mice, keyboards, graphics, audio, etc. Identifying
the necessary drivers, making sure they're loaded, and have the right
settings will be the toughest part (there are helpers for most things
though, like "Soundcard Detection" etc.).

It won't be easy, but it should be possible, just don't try booting past
level 3 the first time you fire it up with the new hardware, and
scrutinise dmesg carefully.

As for XP, forget it. Just WipeNReinstall®.

--
K.
http://slated.org

.----
| I found [Vista] to be a dangerously unstable operating system,
| which has caused me to lose data ... unfortunately this product
| is unfit for any user. - [H]ardOCP, <http://tinyurl.com/3bpfs2>
`----

Fedora Core release 5 (Bordeaux) on sky, running kernel 2.6.20-1.2307.fc5
20:42:48 up 2 days, 4:54, 3 users, load average: 0.15, 0.37, 0.39

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list



Relevant Pages

  • Re: AverMedia AverTVHD MCE A180 stutter
    ... I have done a complete reinstall of MCE on the SATA ... hard drive and only put in the NVTV analog tuner and the A180. ... WatchHDTV instead of MCE (because this program doesn't buffer the video). ... >> I also assume that you are not using a dual core CPU even though RU2 ...
    (microsoft.public.windows.mediacenter)
  • Re: PATA HDD and only 2 IDE connectors
    ... It has 2 IDE connectors and 4 SATA connectors. ... the drives, I wouldn't even thing of going there. ...
    (comp.sys.ibm.pc.hardware.chips)
  • Re: Sata cabling
    ... Serial data transfer right. ... Take 4 SATA cables in parallel to a Hard Drive ... that has four SATA connectors. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Adding Second Sata Disk P5K-E
    ... Should this disk be connected to one of the black sata connectors ... Chapter 14 is for the four port SATA controller. ... supports legacy and native mode (I/O space and IRQ14/15 versus ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Fried Maxtor 5.25 HD 120GB
    ... The new machine has a SATA interface. ... I tried putting an ATA into it. ... What he is saying is that SATA connectors are not physically ...
    (sci.electronics.repair)