Re: how to mount a cd-rw/dvd-rom drive

Okay here is what I did.

1. I got in the case and changed the jumper from the combo drive to master on the combo drive so that it would read dvbd's or cd's if one is put in at startup.
2. I secondly tried changing the jumpers on the cd only drive from what I am assuming is slave to master and back to slave because going to master at least that's what I think anyway was causing problems with udev.
3. I then just took the cd drive offline and connected strictly to the combo drive as master.

Now that the combo drive is master on cd-rom everything is fine.
4. I then told the bios to shut off the cd drive because it was still looking for it.

Scott
----- Original Message ----- From: "Ed Greshko" <Ed.Greshko@xxxxxxxxxxx>
To: "For users of Fedora" <fedora-list@xxxxxxxxxx>
Sent: Friday, April 27, 2007 11:59 AM
Subject: Re: how to mount a cd-rw/dvd-rom drive


Scott Berry wrote:
Hi Tim and all trying to help me,

What I found out is that the other cd drive in the computer was causing
havoc so I went ahead and unplugged it as my Dad could only use this one
now because it reads everything. Thanks for the help.

While everyone is surely happy to hear that all is well I am sure that folks
would want a bit more detail so that future problems can be avoided.

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list



--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.6.1/777 - Release Date: 4/26/2007 3:23 PM



--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

Relevant Pages

  • Re: OT: Ist das OK
    ... Jumper muss ... Gehe mal zu www.lge.de, Support, LG Support, Produkt Support. ... als Master und das andere als Slave jumpern. ...
    (microsoft.public.de.german.windowsxp.hardware)
  • Re: OT: Ist das OK
    ... Jumper muss ... Gehe mal zu www.lge.de, Support, LG Support, Produkt Support. ... als Master und das andere als Slave jumpern. ...
    (microsoft.public.de.german.windowsxp.hardware)
  • Re: Installing a second CD-Rom drive
    ... If the jumper is set to master the device MUST be on the end of the ... same with slave - jumper to slave - middle of cable. ... >>I have connected IDE drives in some instances using the middle ...
    (microsoft.public.windowsxp.hardware)
  • Re: CD rom Not installed
    ... You say DVD is to be slave. ... Set jumper on old cdrom as master ... Put old cdrom in computer as master by connecting it to the end of the ...
    (microsoft.public.windowsxp.general)
  • Re: Cable Select vs. Master/slave settings
    ... The jumpers set to master / slave worked ... > fine when the CDROM which is on the secondary of the cable select cable. ... > This is sort of a retraction and a note that jumper selection settings ... If you have a cable select cable, jumper your devices "cs" - ...
    (Fedora)