Re: 40GB Maxtor III in usb doesn't work on FC6, any kernel



On Friday 06 July 2007, Claude Jones wrote:
On Fri July 6 2007 12:51:28 Gene Heskett wrote:
I do note that libata.ko does exist in the /lib/modules path
for the 3 fedora kernels installed, but booting to one of
those kernels does not enable the use of this device.  I'm
thinking its a bios problem.  Can anyone confirm?

Gene: I can't confirm your specific situation, but, I can confirm
that I have a graveyard of such devices around here. They are
notoriously finicky (if you google around you'll see). My best
success has been with the devices that have separate power, or
dual USB cables, one for data, and one for power; also, be aware
that the cables themselves can be extremely problematic and some
can't handle the extra power for some reason (I've determined
that by simple A/B swapping); and, the hub you plug them into
can be an issue - this all revolves around tiny differences
between regular and high-power USB circuits and components - I
have powered hubs from Targus, which weren't so cheap, that will
overload the connection (the LED goes out) as soon as I plug one
of those self-powering drives in; I have cheapie 7-port hubs
from StarTech that never fail. The cheapie cases from Sabrent
are really bad. I've had several LaCie's go bad - they just
start connecting erratically at some point, and then, won't
connect at all; well, I could go on and on, but, I would suggest
you don't assume there's a problem with Fedora necessarily, if
you can't get it to work.

--
Claude Jones
Brunswick, MD, USA

Thanks Claude. I'm beginning to think hardware, and if I can't come up with a
working psu for it, I think I hear a new motherboard calling.

--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yow! I want my nose in lights!

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list



Relevant Pages

  • Re: 40GB Maxtor III in usb doesnt work on FC6, any kernel
    ... On Fri July 6 2007 12:51:28 Gene Heskett wrote: ... dual USB cables, one for data, and one for power; ... have powered hubs from Targus, which weren't so cheap, that will ... you don't assume there's a problem with Fedora necessarily, ...
    (Fedora)
  • Re: onboard NIC: Attansic L2
    ... When you bootup Fedora, Fedora goes along as it normally does, probes ... physically power off the power supply because the motherboard always ... I wonder if M$ plugs microcode into the Attansic L2 chip that renders ... Valid Range: 50-65000 ...
    (Fedora)
  • Ambient light level sensor in Fedora 8???
    ... I thought that I was going nuts at first, but I confirmed this after some experimentation: after upgrading one of my laptops to Fedora 8, the LCD backlight seems to autoadjust itself according to the ambient light level in the room. ... I left the laptop running, then came back a few minutes later with the lights off in the room, and the laptop's screen was about half at its usual brightness. ... I don't see anything in the Gnome power management menu, except the usual global backlight levels for AC Power and Battery modes, and I can trigger this sensor both on AC Power, and battery power, apparently. ...
    (Fedora)
  • Re: Ambient light level sensor in Fedora 8???
    ... This did not happen in Fedora 7. ... lights off in the room, and the laptop's screen was about half at its ... sensor, that triggers the backlight to dim to half power. ...
    (Fedora)
  • Re: making Samba work [Solved]
    ... den 03.08.2005 schrieb Claude Jones um 3:55: ... >> your setup problems at all. ... Probably you did specify "com" as your domain part and the Fedora tools ... machine appear in network browsing. ...
    (Fedora)