Re: How can you get a Seagate USB 160 GB drive to mount?
- From: Richard England <rlengland@xxxxxxxxxxx>
- Date: Fri, 10 Aug 2007 21:56:01 -0700
rlengland@xxxxxxxxxxx wrote:
From: "Mikkel L. Ellertson" <mikkel@xxxxxxxxxxxxxxxx>
Date: 2007/08/10 Fri AM 10:52:30 CDT
To: For users of Fedora <fedora-list@xxxxxxxxxx>
Subject: Re: How can you get a Seagate USB 160 GB drive to mount?
rlengland@xxxxxxxxxxx wrote:
I created the fstab entry only to test whether the device worked.How to do it depends on the file system. For 2e/e3 file systems,
I'll remove it.
I don't think I've placed a label on an external device after the
fact. What is the procedure? And does it have any harmful effects on
data on the device?
This drive has someone's complete audio collection on it and they
would prefer to not loose it. :-)
e2label will add a label without affecting the file system. For
(V)FAT file systems, I have not found a good way to add a label
under Linux. You can add one under windows without any problems.
Mikkel
--
Do not meddle in the affairs of dragons,
for thou art crunchy and taste good with Ketchup!
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
It's VFAT. I'll have to wait till I get back to the machine tonight and connect it to my one lone Windoze box.
Thank you Mikkel. I'll report on the results.
~~R
The drive had a label of "SEAGATE". I changed it, just to be certain, to "USB_SEAGATE" and remove the /etc/fstab entry for /dev/sdc1. Setting /etc/mtools.conf and using mlabel as Tim and Matthew suggested, worked fine.
Upon unplugging and replugging, however,I had the same results. No desktop icon, no mount.
/var/log/messages shows
Aug 10 21:42:08 didius kernel: scsi 15:0:0:0: Direct-Access ST316002 3A 8.01 PQ: 0 ANSI: 0
Aug 10 21:42:08 didius kernel: sd 15:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
Aug 10 21:42:08 didius kernel: sd 15:0:0:0: [sdc] Write Protect is off
Aug 10 21:42:08 didius kernel: sd 15:0:0:0: [sdc] Assuming drive cache: write through
Aug 10 21:42:08 didius kernel: sd 15:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
Aug 10 21:42:08 didius kernel: sd 15:0:0:0: [sdc] Write Protect is off
Aug 10 21:42:08 didius kernel: sd 15:0:0:0: [sdc] Assuming drive cache: write through
Aug 10 21:42:08 didius kernel: sdc: sdc1
Aug 10 21:42:08 didius kernel: sd 15:0:0:0: [sdc] Attached SCSI disk
Aug 10 21:42:08 didius kernel: sd 15:0:0:0: Attached scsi generic sg4 type 0
so the USB system is seeing it and assign /dev/sdc1 to it. Also, it is visible to lsusb;
$ /sbin/lsusb
Bus 005 Device 018: ID 0bc2:0502 Seagate RSS LLC <--------------
Bus 005 Device 003: ID 0409:0059 NEC Corp. HighSpeed Hub
Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 03f0:3611 Hewlett-Packard
Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000
Any further clues, anyone?
~~R
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
- Follow-Ups:
- References:
- Re: Re: How can you get a Seagate USB 160 GB drive to mount?
- From: rlengland
- Re: Re: How can you get a Seagate USB 160 GB drive to mount?
- Prev by Date: This week: Virtual FudCon8 !!!
- Next by Date: Re: what to restart after mgetty.config changes?
- Previous by thread: Re: Re: How can you get a Seagate USB 160 GB drive to mount?
- Next by thread: Re: How can you get a Seagate USB 160 GB drive to mount?
- Index(es):
Relevant Pages
|
