Fedora 8 VPN Client for Microsoft PPTP VPN server: routing problem



Hi,

Seems that the VPN PPTP connection to MS PPTP server is OK as from the
/var/log/messages, but I can not access the required IP behind the MS
server.
(But from Windows XP , I have no problems to connect to desired IP)

Here are the details:

1. Before starting my netstat -r

(1.1.1.0 is my local network)
Destination Gateway Genmask Flags MSS Window irtt
Iface
1.1.1.0 * 255.255.255.0 U 0 0 0
eth0
192.168.122.0 * 255.255.255.0 U 0 0 0
virbr0
link-local * 255.255.0.0 U 0 0 0
eth0
default 1.1.1.254 0.0.0.0 UG 0 0 0
eth0

After command: pppd call vpn1
I got the following messages in /var/log/messages

Jul 22 14:21:14 razleefs pppd[2898]: pppd 2.4.4 started by root, uid 0
Jul 22 14:21:14 razleefs pppd[2898]: Using interface ppp0
Jul 22 14:21:14 razleefs pppd[2898]: Connect: ppp0 <--> /dev/pts/3
Jul 22 14:21:20 razleefs pptp[2900]: anon log[main:pptp.c:276]: The synchro
pptp option is NOT activated
Jul 22 14:21:20 razleefs pptp[2917]: anon log[ctrlp_rep:pptp_ctrl.c:251]: S
ontrol packet type is 1 'Start-Control-Connection-Request'
Jul 22 14:21:20 razleefs pptp[2917]: anon log[ctrlp_disp:pptp_ctrl.c:738]:
ved Start Control Connection Reply
Jul 22 14:21:20 razleefs pptp[2917]: anon log[ctrlp_disp:pptp_ctrl.c:772]:
t connection established.
Jul 22 14:21:21 razleefs pptp[2917]: anon log[ctrlp_rep:pptp_ctrl.c:251]: S
ontrol packet type is 7 'Outgoing-Call-Request'
Jul 22 14:21:21 razleefs pptp[2917]: anon log[ctrlp_disp:pptp_ctrl.c:857]:
ved Outgoing Call Reply.
Jul 22 14:21:21 razleefs pptp[2917]: anon log[ctrlp_disp:pptp_ctrl.c:896]:
ing call established (call ID 0, peer's call ID 39197).
Jul 22 14:21:22 razleefs pptp[2917]: anon log[ctrlp_disp:pptp_ctrl.c:949]:
SET_LINK_INFO received from peer_callid 0
Jul 22 14:21:22 razleefs pptp[2917]: anon log[ctrlp_disp:pptp_ctrl.c:952]:
d_accm is 00000000, recv_accm is FFFFFFFF
Jul 22 14:21:22 razleefs pptp[2917]: anon warn[ctrlp_disp:pptp_ctrl.c:955]:
zero Async Control Character Maps are not supported!

Jul 22 14:21:22 razleefs pppd[2898]: CHAP authentication succeeded
Jul 22 14:21:22 razleefs kernel: PPP MPPE Compression module registered
Jul 22 14:21:22 razleefs pppd[2898]: MPPE 128-bit stateless compression ena
Jul 22 14:21:23 razleefs pppd[2898]: local IP address 192.168.10.14
Jul 22 14:21:23 razleefs pppd[2898]: remote IP address 192.168.10.12
Jul 22 14:21:23 razleefs pppd[2898]: primary DNS address 192.168.10.1
Jul 22 14:21:23 razleefs pppd[2898]: secondary DNS address 192.168.0.5

I understand that it means that connection tunnel is ready.

netstat -r is now:
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.10.12 * 255.255.255.255 UH 0 0 0
ppp0
1.1.1.0 * 255.255.255.0 U 0 0 0
eth0
192.168.122.0 * 255.255.255.0 U 0 0 0
virbr0
link-local * 255.255.0.0 U 0 0 0
eth0
default 1.1.1.254 0.0.0.0 UG 0 0 0
eth0

I need now to get connection to IP 172.25.9.64 behind the Windows VPN
server.
I can not do it without some route commands.

I tried the suggested commands in vain:
route add -net 192.168.10.0 netmask 255.255.255.0 dev ppp0
route add -net 172.25.9.0 netmask 255.255.255.0 dev ppp0

I tried ping 172.25.9.64 but it hanged up,
and I got the message:
ping 172.25.9.64
PING 172.25.9.64 (172.25.9.64) 56(84) bytes of data.
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted


(telnet 172.25.9.64 simply hangs up)

I am looking for correct route commands to make it working.

Regards,

Zvi



--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list



Relevant Pages

  • Re: Is it possible to manually activate an eth0 connection?
    ... Is it possible to manually activate an eth0 connection? ... any more to ping my router and desktop ... DNS Servers: enter the dns servers for your ISP ... ...
    (Ubuntu)
  • Re: Eth1 problems again
    ... fixed addresses and see if ping then works. ... Bringing up interface eth0: ... Bringing up interface eth1: sysfs class device: Permission denied ... ping: sendmsg: Operation not permitted ...
    (Fedora)
  • Re: Is it possible to manually activate an eth0 connection?
    ... When 'DOS' is indicated in the BIOS settings als 'Standard OS, ping ... However, according to 'KMANAGENER', eth0 is still 'unmanaged'. ... which hampers the internet connection I am trying to establish. ... When the BIOS settings have been set to 'DOS' as 'standard OS', ...
    (Ubuntu)
  • Re: Eth1 problems again
    ... Bringing up interface eth0: ... Determining IP information for eth0... ... PING 192.168.0.2 56bytes of data. ... ping: sendmsg: Operation not permitted ...
    (Fedora)
  • Re: Ping and LAN Problem
    ... named by OS as eth0 and eth2. ... my laptop connected to this ... PING 192.168.0.2 56bytes of data. ... ping: sendmsg: Operation not permitted ...
    (Ubuntu)