Re: Debugging hotplug
- From: ritz <khadgaray@xxxxxxxxx>
- Date: Fri, 25 Jan 2008 18:25:57 +0530
Hello
On Fri, 2008-01-25 at 07:33 -0500, Dan Williams wrote:
On Fri, 2008-01-25 at 10:46 +0530, ritz wrote:Additionally, i would suggest you to try monitoring system and session
Hello
On Tue, 2008-01-22 at 18:37 +0000, Paulo J. Matos wrote:
On Jan 20, 2008 12:15 AM, George Vlahavas <vlahavas@xxxxxxxxx> wrote:
2008/1/19, MHR <mhullrich@xxxxxxxxx>:
On Jan 19, 2008 11:50 AM, Paulo J. Matos <pocm@xxxxxxxxxxx> wrote:Or it could be some hal rule that got installed by another package
> > but for a couple of days, I plug in something and nothing happens.
On Jan 17, 2008 9:59 PM, Paulo J. Matos <pocm@xxxxxxxxxxx > wrote:
Hello all,
In gnome 2.20, I've always had hotplug working. Each time I plug my
external HD, it gets mounted, or my camera, or mp3 player or whatever,
This is probably an OS problem (automount failure) - what OS are youIs there a way to debug what's going wrong?
I wonder why nobody replies...
running?
that prevents automounting. I've seen that happen with the gparted
package in some distros for example.
Can it be some problem with NetworkManager?
I'm getting this in the system logs when I attach something:
Jan 22 18:36:03 euler usb 5-1: new high speed USB device using
ehci_hcd and address 8
Jan 22 18:36:04 euler usb 5-1: configuration #1 chosen from 1 choice
Jan 22 18:36:04 euler hub 5-1:1.0: USB hub found
Jan 22 18:36:04 euler hub 5-1:1.0: 4 ports detected
Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.031222]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial').
Jan 22 18:36:04 euler hub 1-0:1.0: over-current change on port 2
Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.232276]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial_if0').
Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.316900]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial_usbraw').
Jan 22 18:36:04 euler usb 5-1.2: new high speed USB device using
ehci_hcd and address 9
Jan 22 18:36:04 euler usb 5-1.2: configuration #1 chosen from 1 choice
Jan 22 18:36:04 euler scsi5 : SCSI emulation for USB Mass Storage devices
Jan 22 18:36:04 euler usb-storage: device found at 9
Jan 22 18:36:04 euler usb-storage: waiting for device to settle before scanning
Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.522854]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7').
Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.667640]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0').
Jan 22 18:36:04 euler NetworkManager: <debug> [1201026964.716621]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_usbraw').
Jan 22 18:36:08 euler usb 1-2: new full speed USB device using
uhci_hcd and address 5
Jan 22 18:36:08 euler usb 1-2: not running at top speed; connect to a
high speed hub
Jan 22 18:36:08 euler usb 1-2: configuration #1 chosen from 1 choice
Jan 22 18:36:08 euler scsi6 : SCSI emulation for USB Mass Storage devices
Jan 22 18:36:08 euler usb-storage: device found at 5
Jan 22 18:36:08 euler usb-storage: waiting for device to settle before scanning
Jan 22 18:36:08 euler NetworkManager: <debug> [1201026968.973308]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1').
Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.140181]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0').
Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.234992]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_usbraw').
Jan 22 18:36:09 euler scsi 5:0:0:0: Direct-Access Kingston
DataTraveler 2.0 6.50 PQ: 0 ANSI: 0 CCS
Jan 22 18:36:09 euler SCSI device sda: 1970175 512-byte hdwr sectors (1009 MB)
Jan 22 18:36:09 euler sda: Write Protect is off
Jan 22 18:36:09 euler sda: Mode Sense: 45 00 00 08
Jan 22 18:36:09 euler sda: assuming drive cache: write through
Jan 22 18:36:09 euler SCSI device sda: 1970175 512-byte hdwr sectors (1009 MB)
Jan 22 18:36:09 euler sda: Write Protect is off
Jan 22 18:36:09 euler sda: Mode Sense: 45 00 00 08
Jan 22 18:36:09 euler sda: assuming drive cache: write through
Jan 22 18:36:09 euler sda: sda1
Jan 22 18:36:09 euler sd 5:0:0:0: Attached scsi removable disk sda
Jan 22 18:36:09 euler sd 5:0:0:0: Attached scsi generic sg0 type 0
Jan 22 18:36:09 euler usb-storage: device scan complete
Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.563906]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0_scsi_host').
Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.570017]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0_scsi_host_scsi_device_lun0').
Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.575826]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_8ec_2038_0F714B6150C388C7_if0_scsi_host_scsi_device_lun0_scsi_generic').
Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.727791]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/storage_serial_Kingston_DataTraveler_2_0_0F714B6150C388C7_0_0').
Jan 22 18:36:09 euler NetworkManager: <debug> [1201026969.795003]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/volume_uuid_d7720317_54c4_4ce6_b07d_fb985a5bab46').
Jan 22 18:36:13 euler scsi 6:0:0:0: Direct-Access WDC WD12
00UE-00KVT0 0000 PQ: 0 ANSI: 0
Jan 22 18:36:13 euler SCSI device sdb: 234441648 512-byte hdwr sectors
(120034 MB)
Jan 22 18:36:13 euler sdb: Write Protect is off
Jan 22 18:36:13 euler sdb: Mode Sense: 27 00 00 00
Jan 22 18:36:13 euler sdb: assuming drive cache: write through
Jan 22 18:36:13 euler SCSI device sdb: 234441648 512-byte hdwr sectors
(120034 MB)
Jan 22 18:36:13 euler sdb: Write Protect is off
Jan 22 18:36:13 euler sdb: Mode Sense: 27 00 00 00
Jan 22 18:36:13 euler sdb: assuming drive cache: write through
Jan 22 18:36:13 euler sdb: sdb1
Jan 22 18:36:13 euler sd 6:0:0:0: Attached scsi disk sdb
Jan 22 18:36:13 euler sd 6:0:0:0: Attached scsi generic sg1 type 0
Jan 22 18:36:13 euler usb-storage: device scan complete
Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.019744]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0_scsi_host').
Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.025084]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0_scsi_host_scsi_device_lun0').
Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.160125]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/storage_serial_WDC_WD12_00UE_00KVT0_DEF103C306F1_0_0').
Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.168327]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_1058_701_DEF103C306F1_if0_scsi_host_scsi_device_lun0_scsi_generic').
Jan 22 18:36:14 euler NetworkManager: <debug> [1201026974.548287]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/volume_uuid_8b15f11e_1008_4964_bc2f_4b5b3029d19f').
Looks rather odd to me. Which distro are you using ?
Does disabling nm help ?
bus.
$ man 1 dbus-monitor
Nice. I was not aware of this.
NM shouldn't actually touch anything that's not a network device, even
though it will log the insert. So it'll show up here but NM will just
ignore it unless it has HAL network device properties.
--
Dan
Ritesh Khadgaray
ॐ मणि पद्मे हूँ
Desktop LinuX N Stuff
Ph: +919970164885
Eat Right, Exercise, Die Anyway.
Fedora is the best of what works today. Enterprise Linux is the best of
what will work consistently for the next seven years.
_______________________________________________
gnome-list mailing list
gnome-list@xxxxxxxxx
http://mail.gnome.org/mailman/listinfo/gnome-list
- Follow-Ups:
- Re: Debugging hotplug
- From: Paulo J. Matos
- Re: Debugging hotplug
- References:
- Debugging hotplug
- From: Paulo J. Matos
- Re: Debugging hotplug
- From: Paulo J. Matos
- Re: Debugging hotplug
- From: MHR
- Re: Debugging hotplug
- From: George Vlahavas
- Re: Debugging hotplug
- From: Paulo J. Matos
- Re: Debugging hotplug
- From: ritz
- Re: Debugging hotplug
- From: Dan Williams
- Debugging hotplug
- Prev by Date: Re: Problems logging out
- Next by Date: GConf problem
- Previous by thread: Re: Debugging hotplug
- Next by thread: Re: Debugging hotplug
- Index(es):
Relevant Pages
|
|
