Re: [PATCH] linux-2.6.0-test2 h8300 archtecure support update (1/6)
From: Yoshinori Sato (ysato_at_users.sourceforge.jp)
Date: 07/30/03
- Previous message: Benjamin Herrenschmidt: "Re: [PATCH] Framebuffer: client notification mecanism & PM"
- In reply to: Sam Ravnborg: "Re: [PATCH] linux-2.6.0-test2 h8300 archtecure support update (1/6)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Wed, 30 Jul 2003 21:20:12 +0900 To: sam@ravnborg.org
At Tue, 29 Jul 2003 21:20:56 +0200,
Sam Ravnborg wrote:
>
> On Mon, Jul 28, 2003 at 11:18:23PM +0900, Yoshinori Sato wrote:
> > BOARD := $(board-y)
>
> There is no need for renaming this variable, it is only reference three
> times, so board-y would be fine.
> Same goes for MODEL.
Because use MODEL by selection of rom/ram, cannot use it with this intended use.
Do not need to see it outside, I mean if there is not a problem.
> > +
> > +vmlinux.bin: vmlinux
> > + $(OBJCOPY) -Obinary $< $@
> > +
> > +vmlinux.srec: vmlinux
> > + $(OBJCOPY) -Osrec $< $@
> The above is more suited for a seperate boot/ directory.
>
> Example:
> boot := arch/$(ARCH)/boot
> vmlinux.srec vmlinux.bin: vmlinux
> $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
>
> archclean:
> $(Q)$(MAKE) $(clean)=$(boot)
>
> (The current archclean rule is plain wrong).
>
>
> And in boot/Makefile
>
> OBJCOPYFLAGS_vmlinux.srec := -Osrec
> OBJCOPYFLAGS_vmlinux.bin := -Obinary
> $(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
> $(call if_changed,objcopy)
> @echo ' Kernel: $@ is ready'
>
> targets += vmlinux.srec vmlinux.bin
>
>
> > +
> > +define archhelp
> > + echo 'vmlinux.bin - Create raw binary'
> > + echo 'vmlinux.srec - Create srec binary'
> > +endef
> OK - shall stay in arch/$(ARCH)/Makefile
>
> > +
> > +CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
>
> Replaced by targets assignment in boot/Makefile.
> But you shall add files related to asm-offsets:
> CLEAN_FILES += include/asm-$(ARCH)/asm-offsets.h
>
> Sam
fixed.
thank you.
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
diff -Nru linux-2.6.0-test2-h8300/arch/h8300/Makefile linux-2.6.0-test2-h8300-makefix/arch/h8300/Makefile
--- linux-2.6.0-test2-h8300/arch/h8300/Makefile 2003-07-28 12:40:08.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/arch/h8300/Makefile 2003-07-30 18:42:25.000000000 +0900
@@ -5,7 +5,7 @@
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
-# (C) Copyright 2002, Yoshinori Sato <ysato@users.sourceforge.jp>
+# (C) Copyright 2002,2003 Yoshinori Sato <ysato@users.sourceforge.jp>
#
ifndef include-config
-include $(TOPDIR)/.config
@@ -37,8 +37,8 @@
CFLAGS += -mint32 -fno-builtin -Os
CFLAGS += -g
CFLAGS += -D__linux__
-CFLAGS += -DUTS_SYSNAME=\"uClinux\" -DTARGET=$(BOARD)
-AFLAGS += -DPLATFORM=$(PLATFORM) -DTARGET=$(BOARD) -DMODEL=$(MODEL) $(cflags-y)
+CFLAGS += -DUTS_SYSNAME=\"uClinux\"
+AFLAGS += -DPLATFORM=$(PLATFORM) -DMODEL=$(MODEL) $(cflags-y)
LDFLAGS += $(ldflags-y)
CROSS_COMPILE = h8300-elf-
@@ -53,28 +53,32 @@
libs-y += arch/$(ARCH)/lib/ $(LIBGCC)
-export MODEL
+boot := arch/h8300/boot
+
+export MODEL PLATFORM
archmrproper:
archclean:
- $(call descend arch/$(ARCH), subdirclean)
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+prepare: include/asm-$(ARCH)/machine-depend.h include/asm-$(ARCH)/asm-offsets.h
-prepare: include/asm-$(ARCH)/asm-offsets.h
+include/asm-$(ARCH)/machine-depend.h: include/asm-$(ARCH)/$(BOARD)/machine-depend.h
+ $(Q)ln -sf $(BOARD)/machine-depend.h \
+ include/asm-$(ARCH)/machine-depend.h
+ @echo ' Create include/asm-$(ARCH)/machine-depend.h'
include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
include/asm include/linux/version.h
$(call filechk,gen-asm-offsets)
-vmlinux.bin: vmlinux
- $(OBJCOPY) -Obinary $< $@
-
-vmlinux.srec: vmlinux
- $(OBJCOPY) -Osrec $< $@
+vmlinux.srec vmlinux.bin: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
define archhelp
echo 'vmlinux.bin - Create raw binary'
echo 'vmlinux.srec - Create srec binary'
endef
-CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
+CLEAN_FILES += include/asm-$(ARCH)/asm-offsets.h include/asm-$(ARCH)/machine-depend.h
diff -Nru linux-2.6.0-test2-h8300/arch/h8300/boot/Makefile linux-2.6.0-test2-h8300-makefix/arch/h8300/boot/Makefile
--- linux-2.6.0-test2-h8300/arch/h8300/boot/Makefile 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/arch/h8300/boot/Makefile 2003-07-30 19:35:31.000000000 +0900
@@ -0,0 +1,12 @@
+# arch/h8300/boot/Makefile
+
+targets := vmlinux.srec vmlinux.bin
+
+OBCOPYFLAGS_vmlinux.srec := -Osrec
+OBCOPYFLAGS_vmlinux.bin := -Obin
+
+$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo ' Kernel: $@ is ready'
+
+CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,35 @@
+/* AE-3068 board depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#include <linux/config.h>
+#define H8300_TIMER_COUNT_DATA 20000*10/8192
+#define H8300_TIMER_FREQ 20000*1000/8192
+#endif
+
+/* AE-3068 RTL8019AS Config */
+#ifdef H8300_NE_DEFINE
+
+#define NE2000_ADDR 0x200000
+#define NE2000_IRQ 5
+#define NE2000_IRQ_VECTOR (12 + NE2000_IRQ)
+#define NE2000_BYTE volatile unsigned short
+
+#define IER 0xfee015
+#define ISR 0xfee016
+#define IRQ_MASK (1 << NE2000_IRQ)
+
+#define WCRL 0xfee023
+#define MAR0A 0xffff20
+#define ETCR0A 0xffff24
+#define DTCR0A 0xffff27
+#define MAR0B 0xffff28
+#define DTCR0B 0xffff2f
+
+#define H8300_INIT_NE() \
+do { \
+ wordlength = 1; \
+ outb_p(0x48, ioaddr + EN0_DCFG); \
+} while(0)
+
+#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/ne.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/ne.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/ne.h 2003-07-19 21:41:33.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/ne.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,28 +0,0 @@
-/* AE-3068 (aka. aki3068net) RTL8019AS Config */
-
-#ifndef __H8300_AKI3068NET_NE__
-#define __H8300_AKI3068NET_NE__
-
-#define NE2000_ADDR 0x200000
-#define NE2000_IRQ 5
-#define NE2000_IRQ_VECTOR (12 + NE2000_IRQ)
-#define NE2000_BYTE volatile unsigned short
-
-#define IER 0xfee015
-#define ISR 0xfee016
-#define IRQ_MASK (1 << NE2000_IRQ)
-
-#define WCRL 0xfee023
-#define MAR0A 0xffff20
-#define ETCR0A 0xffff24
-#define DTCR0A 0xffff27
-#define MAR0B 0xffff28
-#define DTCR0B 0xffff2f
-
-#define H8300_INIT_NE() \
-do { \
- wordlength = 1; \
- outb_p(0x48, ioaddr + EN0_DCFG); \
-} while(0)
-
-#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/timer_rate.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/timer_rate.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/aki3068net/timer_rate.h 2003-07-20 01:19:25.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/aki3068net/timer_rate.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,9 +0,0 @@
-#ifndef __H8300_AKI3068NET_TIMER_RATE__
-#define __H8300_AKI3068NET_TIMER_RATE__
-
-#include <linux/config.h>
-
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
-
-#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/edosk2674/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/edosk2674/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/edosk2674/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/edosk2674/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,70 @@
+/* EDOSK2674 board depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#define H8300_TIMER_COUNT_DATA 33000*10/8192
+#define H8300_TIMER_FREQ 33000*1000/8192
+#endif
+
+/* EDOSK-2674R SMSC Network Controler Target Depend impliments */
+#ifdef H8300_SMSC_DEFINE
+
+#define SMSC_BASE 0xf80000
+#define SMSC_IRQ 16
+
+/* sorry quick hack */
+#if defined(outw)
+# undef outw
+#endif
+#define outw(d,a) edosk2674_smsc_outw(d,(volatile unsigned short *)(a))
+#if defined(inw)
+# undef inw
+#endif
+#define inw(a) edosk2674_smsc_inw((volatile unsigned short *)(a))
+#if defined(outsw)
+# undef outsw
+#endif
+#define outsw(a,p,l) edosk2674_smsc_outsw((volatile unsigned short *)(a),p,l)
+#if defined(insw)
+# undef insw
+#endif
+#define insw(a,p,l) edosk2674_smsc_insw((volatile unsigned short *)(a),p,l)
+
+static inline void edosk2674_smsc_outw(
+ unsigned short d,
+ volatile unsigned short *a
+ )
+{
+ *a = (d >> 8) | (d << 8);
+}
+
+static inline unsigned short edosk2674_smsc_inw(
+ volatile unsigned short *a
+ )
+{
+ unsigned short d;
+ d = *a;
+ return (d >> 8) | (d << 8);
+}
+
+static inline void edosk2674_smsc_outsw(
+ volatile unsigned short *a,
+ unsigned short *p,
+ unsigned long l
+ )
+{
+ for (; l != 0; --l, p++)
+ *a = *p;
+}
+
+static inline void edosk2674_smsc_insw(
+ volatile unsigned short *a,
+ unsigned short *p,
+ unsigned long l
+ )
+{
+ for (; l != 0; --l, p++)
+ *p = *a;
+}
+
+#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/edosk2674/timer_rate.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/edosk2674/timer_rate.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/edosk2674/timer_rate.h 2003-07-20 01:18:09.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/edosk2674/timer_rate.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,4 +0,0 @@
-#include <linux/config.h>
-
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/generic/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/generic/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/generic/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/generic/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,17 @@
+/* machine depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#include <linux/config.h>
+#if defined(CONFIG_H83007) || defined(CONFIG_H83068) || defined(CONFIG_H8S2678)
+#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
+#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
+#endif
+
+#if defined(CONFIG_H8_3002) || defined(CONFIG_H83048)
+#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8
+#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8
+#endif
+
+#endif
+
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/generic/timer_rate.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/generic/timer_rate.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/generic/timer_rate.h 2003-07-19 21:41:33.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/generic/timer_rate.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,15 +0,0 @@
-#include <linux/config.h>
-
-#if defined(CONFIG_H83007) || defined(CONFIG_H83068) || defined(CONFIG_H8S2678)
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
-#endif
-
-#if defined(H8_3002) || defined(CONFIG_H83048)
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8
-#endif
-
-#if !defined(H8300_TIMER_COUNT_DATA)
-#error illigal configuration
-#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8300_ne.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8300_ne.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8300_ne.h 2003-07-14 15:04:49.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8300_ne.h 2003-07-30 17:41:06.000000000 +0900
@@ -11,9 +11,9 @@
#define h8300ne_h
/****************************************************************************/
-/* Such a description is OK ? */
-#define DEPEND_HEADER(target) <asm/target/ne.h>
-#include DEPEND_HEADER(TARGET)
+#define H8300_NE_DEFINE
+#include <asm/machine-depend.h>
+#undef H8300_NE_DEFINE
/****************************************************************************/
#endif /* h8300ne_h */
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8max/ide.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/ide.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8max/ide.h 2003-07-14 15:04:49.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/ide.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,60 +0,0 @@
-/* H8MAX IDE I/F Config */
-
-#define H8300_IDE_BASE 0x200000
-#define H8300_IDE_CTRL 0x60000c
-#define H8300_IDE_IRQ 5
-#define H8300_IDE_REG_OFFSET 2
-
-#undef outb
-#undef inb
-#undef outb_p
-#undef inb_p
-#undef outsw
-#undef insw
-
-#define outb(d,a) h8max_outb(d,(unsigned short *)a)
-#define inb(a) h8max_inb((unsigned char *)a)
-#define outb_p(d,a) h8max_outb(d,(unsigned short *)a)
-#define inb_p(a) h8max_inb((unsigned char *)a)
-#define outsw(addr,buf,len) h8max_outsw(addr,buf,len);
-#define insw(addr,buf,len) h8max_insw(addr,buf,len);
-
-static inline void h8max_outb(unsigned short d,unsigned short *a)
-{
- *a = d;
-}
-
-static inline unsigned char h8max_inb(unsigned char *a)
-{
- return *(a+1);
-}
-
-static inline void h8max_outsw(void *addr, void *buf, int len)
-{
- unsigned volatile short *ap = (unsigned volatile short *)addr;
- unsigned short *bp = (unsigned short *)buf;
- unsigned short d;
- while(len--) {
- d = *bp++;
- *ap = (d >> 8) | (d << 8);
- }
-}
-
-static inline void h8max_insw(void *addr, void *buf, int len)
-{
- unsigned volatile short *ap = (unsigned volatile short *)addr;
- unsigned short *bp = (unsigned short *)buf;
- unsigned short d;
- while(len--) {
- d = *ap;
- *bp++ = (d >> 8) | (d << 8);
- }
-}
-
-static inline void target_ide_fix_driveid(struct hd_driveid *id)
-{
- int c;
- unsigned short *p = (unsigned short *)id;
- for (c = 0; c < SECTOR_WORDS; c++, p++)
- *p = (*p >> 8) | (*p << 8);
-}
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8max/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8max/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,167 @@
+/* H8MAX board depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#define H8300_TIMER_COUNT_DATA 25000*10/8192
+#define H8300_TIMER_FREQ 25000*1000/8192
+#endif
+
+/* H8MAX RTL8019AS Config */
+#ifdef H8300_NE_DEFINE
+
+#define NE2000_ADDR 0x800600
+#define NE2000_IRQ 4
+#define NE2000_IRQ_VECTOR (12 + NE2000_IRQ)
+#define NE2000_BYTE volatile unsigned short
+
+#define IER 0xfee015
+#define ISR 0xfee016
+#define IRQ_MASK (1 << NE2000_IRQ)
+/* sorry quick hack */
+#if defined(outb)
+# undef outb
+#endif
+#define outb(d,a) h8max_outb((d),(a) - NE2000_ADDR)
+#if defined(inb)
+# undef inb
+#endif
+#define inb(a) h8max_inb((a) - NE2000_ADDR)
+#if defined(outb_p)
+# undef outb_p
+#endif
+#define outb_p(d,a) h8max_outb((d),(a) - NE2000_ADDR)
+#if defined(inb_p)
+# undef inb_p
+#endif
+#define inb_p(a) h8max_inb((a) - NE2000_ADDR)
+#if defined(outsw)
+# undef outsw
+#endif
+#define outsw(a,p,l) h8max_outsw((a) - NE2000_ADDR,(unsigned short *)p,l)
+#if defined(insw)
+# undef insw
+#endif
+#define insw(a,p,l) h8max_insw((a) - NE2000_ADDR,(unsigned short *)p,l)
+#if defined(outsb)
+# undef outsb
+#endif
+#define outsb(a,p,l) h8max_outsb((a) - NE2000_ADDR,(unsigned char *)p,l)
+#if defined(insb)
+# undef insb
+#endif
+#define insb(a,p,l) h8max_insb((a) - NE2000_ADDR,(unsigned char *)p,l)
+
+#define H8300_INIT_NE() \
+do { \
+ wordlength = 2; \
+ h8max_outb(0x49, ioaddr + EN0_DCFG); \
+ SA_prom[14] = SA_prom[15] = 0x57;\
+} while(0)
+
+static inline void h8max_outb(unsigned char d,unsigned char a)
+{
+ *(unsigned short *)(NE2000_ADDR + (a << 1)) = d;
+}
+
+static inline unsigned char h8max_inb(unsigned char a)
+{
+ return *(unsigned char *)(NE2000_ADDR + (a << 1) +1);
+}
+
+static inline void h8max_outsw(unsigned char a,unsigned short *p,unsigned long l)
+{
+ unsigned short d;
+ for (; l != 0; --l, p++) {
+ d = (((*p) >> 8) & 0xff) | ((*p) << 8);
+ *(unsigned short *)(NE2000_ADDR + (a << 1)) = d;
+ }
+}
+
+static inline void h8max_insw(unsigned char a,unsigned short *p,unsigned long l)
+{
+ unsigned short d;
+ for (; l != 0; --l, p++) {
+ d = *(unsigned short *)(NE2000_ADDR + (a << 1));
+ *p = (d << 8)|((d >> 8) & 0xff);
+ }
+}
+
+static inline void h8max_outsb(unsigned char a,unsigned char *p,unsigned long l)
+{
+ for (; l != 0; --l, p++) {
+ *(unsigned short *)(NE2000_ADDR + (a << 1)) = *p;
+ }
+}
+
+static inline void h8max_insb(unsigned char a,unsigned char *p,unsigned long l)
+{
+ for (; l != 0; --l, p++) {
+ *p = *((unsigned char *)(NE2000_ADDR + (a << 1))+1);
+ }
+}
+
+#endif
+
+/* H8MAX IDE I/F Config */
+#ifdef H8300_IDE_DEFINE
+
+#define H8300_IDE_BASE 0x200000
+#define H8300_IDE_CTRL 0x60000c
+#define H8300_IDE_IRQ 5
+#define H8300_IDE_REG_OFFSET 2
+
+#undef outb
+#undef inb
+#undef outb_p
+#undef inb_p
+#undef outsw
+#undef insw
+
+#define outb(d,a) h8max_outb(d,(unsigned short *)a)
+#define inb(a) h8max_inb((unsigned char *)a)
+#define outb_p(d,a) h8max_outb(d,(unsigned short *)a)
+#define inb_p(a) h8max_inb((unsigned char *)a)
+#define outsw(addr,buf,len) h8max_outsw(addr,buf,len);
+#define insw(addr,buf,len) h8max_insw(addr,buf,len);
+
+static inline void h8max_outb(unsigned short d,unsigned short *a)
+{
+ *a = d;
+}
+
+static inline unsigned char h8max_inb(unsigned char *a)
+{
+ return *(a+1);
+}
+
+static inline void h8max_outsw(void *addr, void *buf, int len)
+{
+ unsigned volatile short *ap = (unsigned volatile short *)addr;
+ unsigned short *bp = (unsigned short *)buf;
+ unsigned short d;
+ while(len--) {
+ d = *bp++;
+ *ap = (d >> 8) | (d << 8);
+ }
+}
+
+static inline void h8max_insw(void *addr, void *buf, int len)
+{
+ unsigned volatile short *ap = (unsigned volatile short *)addr;
+ unsigned short *bp = (unsigned short *)buf;
+ unsigned short d;
+ while(len--) {
+ d = *ap;
+ *bp++ = (d >> 8) | (d << 8);
+ }
+}
+
+static inline void target_ide_fix_driveid(struct hd_driveid *id)
+{
+ int c;
+ unsigned short *p = (unsigned short *)id;
+ for (c = 0; c < SECTOR_WORDS; c++, p++)
+ *p = (*p >> 8) | (*p << 8);
+}
+
+#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8max/ne.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/ne.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8max/ne.h 2003-07-19 21:41:33.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/ne.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,97 +0,0 @@
-/* H8MAX RTL8019AS Config */
-
-#ifndef __H8300_H8MAX_NE__
-#define __H8300_H8MAX_NE__
-
-#define NE2000_ADDR 0x800600
-#define NE2000_IRQ 4
-#define NE2000_IRQ_VECTOR (12 + NE2000_IRQ)
-#define NE2000_BYTE volatile unsigned short
-
-#define IER 0xfee015
-#define ISR 0xfee016
-#define IRQ_MASK (1 << NE2000_IRQ)
-/* sorry quick hack */
-#if defined(outb)
-# undef outb
-#endif
-#define outb(d,a) h8max_outb((d),(a) - NE2000_ADDR)
-#if defined(inb)
-# undef inb
-#endif
-#define inb(a) h8max_inb((a) - NE2000_ADDR)
-#if defined(outb_p)
-# undef outb_p
-#endif
-#define outb_p(d,a) h8max_outb((d),(a) - NE2000_ADDR)
-#if defined(inb_p)
-# undef inb_p
-#endif
-#define inb_p(a) h8max_inb((a) - NE2000_ADDR)
-#if defined(outsw)
-# undef outsw
-#endif
-#define outsw(a,p,l) h8max_outsw((a) - NE2000_ADDR,(unsigned short *)p,l)
-#if defined(insw)
-# undef insw
-#endif
-#define insw(a,p,l) h8max_insw((a) - NE2000_ADDR,(unsigned short *)p,l)
-#if defined(outsb)
-# undef outsb
-#endif
-#define outsb(a,p,l) h8max_outsb((a) - NE2000_ADDR,(unsigned char *)p,l)
-#if defined(insb)
-# undef insb
-#endif
-#define insb(a,p,l) h8max_insb((a) - NE2000_ADDR,(unsigned char *)p,l)
-
-#define H8300_INIT_NE() \
-do { \
- wordlength = 2; \
- h8max_outb(0x49, ioaddr + EN0_DCFG); \
- SA_prom[14] = SA_prom[15] = 0x57;\
-} while(0)
-
-static inline void h8max_outb(unsigned char d,unsigned char a)
-{
- *(unsigned short *)(NE2000_ADDR + (a << 1)) = d;
-}
-
-static inline unsigned char h8max_inb(unsigned char a)
-{
- return *(unsigned char *)(NE2000_ADDR + (a << 1) +1);
-}
-
-static inline void h8max_outsw(unsigned char a,unsigned short *p,unsigned long l)
-{
- unsigned short d;
- for (; l != 0; --l, p++) {
- d = (((*p) >> 8) & 0xff) | ((*p) << 8);
- *(unsigned short *)(NE2000_ADDR + (a << 1)) = d;
- }
-}
-
-static inline void h8max_insw(unsigned char a,unsigned short *p,unsigned long l)
-{
- unsigned short d;
- for (; l != 0; --l, p++) {
- d = *(unsigned short *)(NE2000_ADDR + (a << 1));
- *p = (d << 8)|((d >> 8) & 0xff);
- }
-}
-
-static inline void h8max_outsb(unsigned char a,unsigned char *p,unsigned long l)
-{
- for (; l != 0; --l, p++) {
- *(unsigned short *)(NE2000_ADDR + (a << 1)) = *p;
- }
-}
-
-static inline void h8max_insb(unsigned char a,unsigned char *p,unsigned long l)
-{
- for (; l != 0; --l, p++) {
- *p = *((unsigned char *)(NE2000_ADDR + (a << 1))+1);
- }
-}
-
-#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/h8max/timer_rate.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/timer_rate.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/h8max/timer_rate.h 2003-07-20 01:19:25.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/h8max/timer_rate.h 1970-01-01 09:00:00.000000000 +0900
@@ -1,10 +0,0 @@
-#ifndef __H8300_H8MAX_TIMER_RATE__
-#define __H8300_H8MAX_TIMER_RATE__
-
-#include <linux/config.h>
-
-#define H8300_TIMER_COUNT_DATA CONFIG_CPU_CLOCK*10/8192
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192
-
-#endif
-
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/ide.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/ide.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/ide.h 2003-07-14 15:04:49.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/ide.h 2003-07-30 17:41:06.000000000 +0900
@@ -70,9 +70,10 @@
* Our list of ports/irq's for different boards.
*/
-/* Such a description is OK ? */
-#define DEPEND_HEADER(target) <asm/target/ide.h>
-#include DEPEND_HEADER(TARGET)
+/* machine depend header include */
+#define H8300_IDE_DEFINE
+#include <asm/machine-depend.h>
+#undef H8300_IDE_DEFINE
/****************************************************************************/
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/machine-depend.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/machine-depend.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/machine-depend.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/machine-depend.h 2003-07-30 18:42:26.000000000 +0900
@@ -0,0 +1,70 @@
+/* EDOSK2674 board depend header */
+
+/* TIMER rate define */
+#ifdef H8300_TIMER_DEFINE
+#define H8300_TIMER_COUNT_DATA 33000*10/8192
+#define H8300_TIMER_FREQ 33000*1000/8192
+#endif
+
+/* EDOSK-2674R SMSC Network Controler Target Depend impliments */
+#ifdef H8300_SMSC_DEFINE
+
+#define SMSC_BASE 0xf80000
+#define SMSC_IRQ 16
+
+/* sorry quick hack */
+#if defined(outw)
+# undef outw
+#endif
+#define outw(d,a) edosk2674_smsc_outw(d,(volatile unsigned short *)(a))
+#if defined(inw)
+# undef inw
+#endif
+#define inw(a) edosk2674_smsc_inw((volatile unsigned short *)(a))
+#if defined(outsw)
+# undef outsw
+#endif
+#define outsw(a,p,l) edosk2674_smsc_outsw((volatile unsigned short *)(a),p,l)
+#if defined(insw)
+# undef insw
+#endif
+#define insw(a,p,l) edosk2674_smsc_insw((volatile unsigned short *)(a),p,l)
+
+static inline void edosk2674_smsc_outw(
+ unsigned short d,
+ volatile unsigned short *a
+ )
+{
+ *a = (d >> 8) | (d << 8);
+}
+
+static inline unsigned short edosk2674_smsc_inw(
+ volatile unsigned short *a
+ )
+{
+ unsigned short d;
+ d = *a;
+ return (d >> 8) | (d << 8);
+}
+
+static inline void edosk2674_smsc_outsw(
+ volatile unsigned short *a,
+ unsigned short *p,
+ unsigned long l
+ )
+{
+ for (; l != 0; --l, p++)
+ *a = *p;
+}
+
+static inline void edosk2674_smsc_insw(
+ volatile unsigned short *a,
+ unsigned short *p,
+ unsigned long l
+ )
+{
+ for (; l != 0; --l, p++)
+ *p = *a;
+}
+
+#endif
diff -Nru linux-2.6.0-test2-h8300/include/asm-h8300/timex.h linux-2.6.0-test2-h8300-makefix/include/asm-h8300/timex.h
--- linux-2.6.0-test2-h8300/include/asm-h8300/timex.h 2003-07-14 15:04:49.000000000 +0900
+++ linux-2.6.0-test2-h8300-makefix/include/asm-h8300/timex.h 2003-07-30 17:41:06.000000000 +0900
@@ -6,9 +6,9 @@
#ifndef _ASM_H8300_TIMEX_H
#define _ASM_H8300_TIMEX_H
-/* Such a description is OK ? */
-#define TIMEX_DEPEND_HEADER(target) <asm/target/timer_rate.h>
-#include TIMEX_DEPEND_HEADER(TARGET)
+#define H8300_TIMER_DEFINE
+#include <asm/machine-depend.h>
+#undef H8300_TIMER_DEFINE
#define CLOCK_TICK_RATE H8300_TIMER_FREQ
#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Benjamin Herrenschmidt: "Re: [PATCH] Framebuffer: client notification mecanism & PM"
- In reply to: Sam Ravnborg: "Re: [PATCH] linux-2.6.0-test2 h8300 archtecure support update (1/6)"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
