Linux version 2.6.0-test2-mm1 (root@rachel) () #5 SMP Wed Jul 30 17:50:20 EDT 2003 Video mode to be used for restore is 30c BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007cf0000 (usable) BIOS-e820: 0000000007cf0000 - 0000000007cff000 (ACPI data) BIOS-e820: 0000000007cff000 - 0000000007d00000 (ACPI NVS) BIOS-e820: 0000000007d00000 - 0000000007e80000 (usable) BIOS-e820: 0000000007e80000 - 0000000008000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 126MB LOWMEM available. found SMP MP-table at 000f6690 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 32384 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 28288 pages, LIFO batch:6 HighMem zone: 0 pages, LIFO batch:1 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: APIC at: 0xFEE00000 Processor #0 15:1 APIC version 20 I/O APIC #1 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=Gentoo ro root=303 Initializing CPU#0 PID hash table entries: 512 (order 9: 4096 bytes) Detected 1694.509 MHz processor. Console: colour VGA+ 132x60 Calibrating delay loop... 3342.33 BogoMIPS Memory: 124340k/129536k available (2187k kernel code, 4584k reserved, 672k data, 152k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: Hyper-Threading is disabled CPU: After generic, caps: 3febfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Celeron(R) CPU 1.70GHz stepping 03 per-CPU timeslice cutoff: 365.64 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Error: only one processor found. ENABLING IO-APIC IRQs Setting 1 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 1 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 1-9, 1-10, 1-11, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected. ..TIMER: vector=0x31 pin1=-1 pin2=0 ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 19. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 41 02 000 00 1 0 0 0 0 0 0 00 03 001 01 1 1 0 0 0 1 1 49 04 001 01 0 0 0 0 0 1 1 51 05 001 01 1 1 0 0 0 1 1 59 06 001 01 0 0 0 0 0 1 1 61 07 001 01 1 1 0 0 0 1 1 69 08 001 01 0 0 0 0 0 1 1 71 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 79 0d 001 01 0 0 0 0 0 1 1 81 0e 001 01 0 0 0 0 0 1 1 89 0f 001 01 0 0 0 0 0 1 1 91 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ8 -> 0:8 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:0 IRQ19 -> 0:3 IRQ21 -> 0:5 IRQ23 -> 0:7 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1694.0244 MHz. ..... host bus clock speed is 99.0661 MHz. Starting migration thread for cpu 0 CPUS done 2 mtrr: v2.0 (20020519) Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfd99a, last bus=2 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 242 entries (12 bytes) biovec pool[1]: 4 bvecs: 242 entries (48 bytes) biovec pool[2]: 16 bvecs: 242 entries (192 bytes) biovec pool[3]: 64 bvecs: 242 entries (768 bytes) biovec pool[4]: 128 bvecs: 121 entries (1536 bytes) biovec pool[5]: 256 bvecs: 60 entries (3072 bytes) Linux Plug and Play Support v0.96 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f6700 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x97c7, dseg 0x400 PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - PCI device 8086:244e PCI: Using IRQ router PIIX [8086/24c0] at 0000:00:1f.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B2,I2,P0) -> 17 PCI->APIC IRQ transform: (B2,I9,P0) -> 21 PCI->APIC IRQ transform: (B2,I9,P1) -> 22 pty: 256 Unix98 ptys configured SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.11 Enabling SEP on CPU 0 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Real Time Clock Driver v1.11 hw_random: RNG not detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: Maximum main memory to use for agp memory: 93M agpgart: Detected 892K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 [drm] Initialized i810 1.3.0 20030605 on minor 0 [drm] Initialized i830 1.3.2 20021108 on minor 1 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 Fast Ethernet at 0xc8886800, 00:40:2b:3a:a6:1c, IRQ 17 eth0: Identified 8139 chip type 'RTL-8139C' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio hda: ST340810A, ATA DISK drive Using anticipatory scheduling elevator ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: host protected area => 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: PCI device 8086:24cd ehci_hcd 0000:00:1d.7: irq 23, pci mem c888a000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 1-0:0: USB hub found hub 1-0:0: 6 ports detected drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci-hcd 0000:00:1d.0: PCI device 8086:24c2 uhci-hcd 0000:00:1d.0: irq 16, io base 00001800 uhci-hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci-hcd 0000:00:1d.1: PCI device 8086:24c4 uhci-hcd 0000:00:1d.1: irq 19, io base 00001820 uhci-hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:0: USB hub found hub 3-0:0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci-hcd 0000:00:1d.2: PCI device 8086:24c7 uhci-hcd 0000:00:1d.2: request interrupt 18 failed drivers/usb/core/hcd-pci.c: init 0000:00:1d.2 fail, -16 drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver drivers/usb/core/usb.c: registered new driver usbscanner drivers/usb/image/scanner.c: 0.4.14:USB Scanner Driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) IPv4 over IPv4 tunneling driver Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. BIOS EDD facility v0.09 2003-Jan-22, 1 devices found found reiserfs format "3.6" with standard journal hub 1-0:0: debounce: port 3: delay 100ms stable 4 status 0x501 hub 1-0:0: debounce: port 5: delay 100ms stable 4 status 0x501 hub 3-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 hub 3-0:0: new USB device on port 1, assigned address 2 drivers/usb/input/hid-ff.c: hid_ff_init could not find initializer input: USB HID v1.10 Mouse [Microsoft Microsoft Wireless Intellimouse Explorer® 1.0A] on usb-0000:00:1d.1-1 Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda3) for (hda3) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 152k freed Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended NTFS driver 2.1.4 [Flags: R/O MODULE]. NTFS volume version 3.0. irq 21: nobody cared! Call Trace: [] __report_bad_irq+0x2a/0x8b [] note_interrupt+0x70/0xa0 [] do_IRQ+0x160/0x191 [] common_interrupt+0x18/0x20 [] do_softirq+0x57/0xc2 [] do_IRQ+0x13d/0x191 [] common_interrupt+0x18/0x20 [] setup_irq+0x8a/0xfd [] request_irq+0x84/0xc6 [] snd_emu10k1_create+0x1d7/0x42f [snd_emu10k1] [] snd_emu10k1_interrupt+0x0/0x3f0 [snd_emu10k1] [] snd_card_emu10k1_probe+0xd5/0x376 [snd_emu10k1] [] pci_device_probe_static+0x52/0x63 [] __pci_device_probe+0x3b/0x4d [] pci_device_probe+0x2f/0x4d [] bus_match+0x45/0x73 [] driver_attach+0x59/0x5d [] bus_add_driver+0x94/0xa7 [] pci_register_driver+0x80/0xa8 [] alsa_card_emu10k1_init+0x13/0x4d [snd_emu10k1] [] sys_init_module+0x130/0x25b [] sysenter_past_esp+0x52/0x71 handlers: [] (snd_emu10k1_interrupt+0x0/0x3f0 [snd_emu10k1]) Disabling IRQ #21 AC'97 0:0 analog subsections not ready lp: driver loaded but no devices found mtrr: base(0xf0020000) is not aligned on a size(0x800000) boundary