Re: issues with any ac sources, and 2.6

From: John Bradford (john_at_grabjohn.com)
Date: 08/03/03

  • Next message: bert hubert: "Re: [PATCH] Allow /dev/{,k}mem to be disabled to prevent kernel from being modified easily" 
    Date:	Sun, 3 Aug 2003 21:56:14 +0100
To: bbeutner@comcast.net, linux-kernel@vger.kernel.org

    > i run a tyan tiger s2462 board with dual athlons, with the gentoo
    > flavor on it, recently i tried to run the ac sourcess kernel on this
    > machine, however upon boot the machine would just freeze up in the
    > middle of kernel boot, either dying while attaching ide's to devices
    > or while detecting the ide chipset, the odd part to this is that
    > using generic linux sources the machine boots just fine the other
    > issue seems to be that using the 2.6-beta versions it panic.
    > it does so by telling me that i have corrupt cpu context and then
    > panics, there are no hints or warning as to what it could be any
    > help would be greatly appreciated

    For the AC kernels, try backing out just the IDE patches, and see if
    that allows you to boot.

    For 2.6, does the machine finish booting, and then panic, or does it
    panic during the boot? Did you try any of the 2.5 kernels, or did you
    start with 2.6? If it panics during boot, does it always panic at the
    same place, and if so where? Posting the boot time output of dmesg,
    and lspci -vvv would be helpful here.

    John.
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: bert hubert: "Re: [PATCH] Allow /dev/{,k}mem to be disabled to prevent kernel from being modified easily"

    Relevant Pages

    • FreeBSD 7 RC2 - Kernel Panic during install boot
      ... Trying to boot the 7.0 RC2 CD, the kernel panics with: ... Here's the console log of the failing boot. ... <CPU Frequency Thermal Control> on cpu0 ...
      (freebsd-stable)
    • Re: issues with any ac sources, and 2.6
      ... that refused to boot on me today and I just pulled and reseated the PCI cards ... recently i tried to run the ac sourcess kernel on this ... If it panics during boot, does it always panic at the ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: stable sata patch: panic at kernel boot (cant dump)
      ... | kernel panic. ... | Kernel paniced just after sio0/sio1, where basic RELENG_4 starts ata channel ... Does the system boot sometimes and other times ... Most panics happen later ...
      (freebsd-stable)
    • Trouble with 5.4
      ... They boot fine, but after kernel has loaded, it panics at the same ... So if i boot to single user mode, ... GNU gdb 6.1.1 ...
      (freebsd-hackers)
    • Re: [ARM] Regression ? at91rm9200 machine-type
      ... I cannot boot my board anymore. ... u-boot is not passing the right boot information to the kernel. ... # Device Drivers ... # RAM/ROM/Flash chip drivers ...
      (Linux-Kernel)