problems with sound and mouse with 2.6.0-test4-mm1

From: Max Valdez (maxvaldez_at_yahoo.com)
Date: 08/27/03

  • Next message: J.A. Magallon: "Re: [PATCH] 2.4: add check_gcc for P3/P4"
    To: kernel <linux-kernel@vger.kernel.org>
    Date:	Tue, 26 Aug 2003 17:25:39 -0500
    
    
    
    

    Hi!

    I just tested the test4-mm1 version of the kernel, it works quite well,
    except for a couple of things:

    1) ALSA modules for emu10k1 are working, but the sound is kind of noisy
    on xmms.

    2) I cannot succesfully start X with "nvidia" propietary modules, Xfree
    worked with the "nv" driver, but my mouse is not getting the scrollball
    to work. I used test1-mm* and all of thise worked, sound wasnt a lot
    better than now, but it was better.

    Any sugestions ?, attached config and lsmod.
    Max

    -- 
    Linux garaged 2.6.0-test4-mm1 #2 SMP Tue Aug 26 16:43:39 CDT 2003 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux
    -----BEGIN GEEK CODE BLOCK-----
    Version: 3.1
    GS/ d-s:a-28C++ILHA+++P+L++>+++E---W++N*o--K-w++++O-M--V--PS+PEY--PGP++t5XRtv++b++DI--D-G++e++h-r+y**
    ------END GEEK CODE BLOCK------
    gpg-key: http://garaged.homeip.net/gpg-key.txt
    
    
    

    Module Size Used by
    nvidia 1701804 0
    sg 32524 0
    parport_pc 26760 0
    parport 40512 1 parport_pc
    snd_emu10k1 73732 0
    snd_rawmidi 23808 1 snd_emu10k1
    snd_seq_device 7556 2 snd_emu10k1,snd_rawmidi
    snd_ac97_codec 52868 1 snd_emu10k1
    snd_util_mem 4608 1 snd_emu10k1
    snd_hwdep 8192 1 snd_emu10k1
    snd_pcm_oss 50308 0
    snd_pcm 95104 2 snd_emu10k1,snd_pcm_oss
    snd_page_alloc 10500 2 snd_emu10k1,snd_pcm
    snd_timer 26368 1 snd_pcm
    snd_mixer_oss 18304 1 snd_pcm_oss
    snd 48132 10 snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
    usbcore 104660 1
    sd_mod 13088 1
    nfs 105772 2
    lockd 62960 2 nfs
    sunrpc 137284 7 nfs,lockd
    emu10k1 80388 3
    sound 85892 1 emu10k1
    soundcore 8768 6 snd,emu10k1,sound
    ac97_codec 18432 1 emu10k1
    aic7xxx 214960 1
    3c59x 33576 0
    st 36756 0
    sr_mod 15520 0
    scsi_mod 72652 5 sg,sd_mod,aic7xxx,st,sr_mod
    cdrom 34976 1 sr_mod

    
    

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/




  • Next message: J.A. Magallon: "Re: [PATCH] 2.4: add check_gcc for P3/P4"

    Relevant Pages

    • Re: PROBLEM: No initialization of sound card
      ... > The dmesg output is: ... This usually means your ALSA modules were not compiled against the right ... kernel version. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • problems with sound and mouse with 2.6.0-test4-mm1
      ... I just tested the test4-mm1 version of the kernel, it works quite well, ... ALSA modules for emu10k1 are working, but the sound is kind of noisy ... I used test1-mm* and all of thise worked, sound wasnt a lot ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: 2.6.10-rc1-mm3
      ... This happened during modprobe of alsa modules. ... not even sysrq would do anything, ... Nov 5 21:39:27 pc kernel: Unable to handle kernel paging request at ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: [patch] Real-Time Preemption, -RT-2.6.10-rc2-mm2-V0.7.30-2
      ... Will report if i ever ... , only the kernel has changed. ... unloading the ALSA modules seems to be over, at least as far as I could ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: 2.6.2: "-" or "_", thats the question
      ... but discover2 uses modprobe to load the modules. ... internal workarounds in discover2 for the inconsistency would ... There are many alsa modules with '-'. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)