Serial ATA on Dell Dimension 8300 (Was: Re: Serial ATA support in 2.4.22)

From: Martin List-Petersen (martin_at_list-petersen.se)
Date: 10/02/03

  • Next message: Zwane Mwaikambo: "Re: 2.6.0 - Network doesn't come up." 
    To: Jeff Garzik <jgarzik@pobox.com>
Date:	Thu, 02 Oct 2003 23:42:51 +0200

    I've got trouble with both 2.4.22-ac1, ac4 and 2.4.22-bk25 + newest sata
    patch. (Debian Sid)

    When i try to boot ac1 or ac4 from harddisk. The kernel would fail by
    endless stating:
    kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
    on screen.

    Do i boot the same kernel from floppy or cd (syslinux/isolinux - dmesg for ac4 attached, bootet from cd) it boots without trouble,
    mounts the harddisk etc.

    The machine is a Dell Dimension 8300 (practically the same as the Precision 360), with Intel 875 chipset (ICH5 SATA controllers).
    In bk25+sata patch reiserfs seems to be broken (dmesg attached), i will try an older version tomorrow.

    I simply can't figure out, whats wrong here.

    Regards,
    Martin List-Petersen
    martin at list-petersen dot se 

    --
Microsoft DNS service terminates abnormally when it recieves a response
to a DNS query that was never made. Fix Information: Run your DNS
service on a different platform.
-- BugTraq

    Linux version 2.4.22-bk25-20031002-odin (root@odin) (gcc version 3.3.2 20030908 (Debian prerelease)) #1 SMP tor okt 2 21:53:33 CEST 2003
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000003ff74000 (usable)
     BIOS-e820: 000000003ff74000 - 000000003ff76000 (ACPI NVS)
     BIOS-e820: 000000003ff76000 - 000000003ff97000 (ACPI data)
     BIOS-e820: 000000003ff97000 - 0000000040000000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
     BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
     BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
     BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    127MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000fe710
    hm, page 000fe000 reserved twice.
    hm, page 000ff000 reserved twice.
    hm, page 000f0000 reserved twice.
    On node 0 totalpages: 262004
    zone(0): 4096 pages.
    zone(1): 225280 pages.
    zone(2): 32628 pages.
    ACPI: RSDP (v000 DELL ) @ 0x000feb90
    ACPI: RSDT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd1ca
    ACPI: FADT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd1fe
    ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc8937
    ACPI: MADT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd272
    ACPI: BOOT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd2de
    ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
    IOAPIC[0]: Assigned apic_id 2
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
    ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
    ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
    Using ACPI (MADT) for SMP configuration information
    Kernel command line: root=/dev/sda2 ro console=tty0 console=ttyS0,9600n8 BOOT_IMAGE=linux.bin
    Initializing CPU#0
    Detected 2992.564 MHz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 5976.88 BogoMIPS
    Memory: 1031936k/1048016k available (1977k kernel code, 15696k reserved, 655k data, 132k init, 130512k highmem)
    Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
    Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    mtrr: detected mtrr type: Intel
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
    per-CPU timeslice cutoff: 1462.91 usecs.
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 00000040
    ESR value after enabling vector: 00000000
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    masked ExtINT on CPU#1
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Calibrating delay loop... 5976.88 BogoMIPS
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
    Total of 2 processors activated (11953.76 BogoMIPS).
    cpu_sibling_map[0] = 1
    cpu_sibling_map[1] = 0
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 pin1=2 pin2=0
    testing the IO APIC.......................
                                                                                                                                                    
    .................................... done.
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 2992.4180 MHz.
    ..... host bus clock speed is 199.4944 MHz.
    cpu: 0, clocks: 1994944, slice: 664981
    CPU0<T0:1994944,T1:1329952,D:11,S:664981,C:1994944>
    cpu: 1, clocks: 1994944, slice: 664981
    CPU1<T0:1994944,T1:664976,D:6,S:664981,C:1994944>
    checking TSC synchronization across CPUs: passed.
    Waiting on wait_init_idle (map = 0x2)
    All processors have done init_idle
    ACPI: Subsystem revision 20030916
    PCI: PCI BIOS revision 2.10 entry at 0xfbb30, last bus=2
    PCI: Using configuration type 1
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
    Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    PCI: Probing PCI hardware
    PCI: Using ACPI for IRQ routing
    PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
    Starting kswapd
    allocated 32 pages and 32 bhs reserved for the highmem bounces
    VFS: Disk quotas vdquot_6.5.1
    Journalled Block Device driver loaded
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x0
    ACPI: Processor [CPU0] (supports C1)
    ACPI: Processor [CPU1] (supports C1)
    pty: 256 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: loaded (max 8 devices)
    Intel(R) PRO/100 Network Driver - version 2.3.18-k1
    Copyright (c) 2003 Intel Corporation
                                                                                                                                                    
    e100: eth0: Intel(R) PRO/100 Network Connection
      Hardware receive checksums enabled
                                                                                                                                                    
    Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH5: IDE controller at PCI slot 00:1f.1
    ICH5: chipset revision 2
    ICH5: not 100% native mode: will probe irqs later
        ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
    ICH5-SATA: IDE controller at PCI slot 00:1f.2
    ICH5-SATA: chipset revision 2
    ICH5-SATA: 100% native mode on irq 18
        ide0: BM-DMA at 0xfea0-0xfea7, BIOS settings: hda:DMA, hdb:pio
    hda: ST3120026AS, ATA DISK drive
    hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
    hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
    blk: queue c041d460, I/O limit 4095Mb (mask 0xffffffff)
    hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive
    hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive
    ide0 at 0xfe00-0xfe07,0xfe12 on irq 18
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: attached ide-disk driver.
    hda: host protected area => 1
    hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63, UDMA(33)
    hdc: attached ide-cdrom driver.
    hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.12
    hdd: attached ide-cdrom driver.
    hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Partition check:
     /dev/ide/host0/bus0/target0/lun0: p1 p2
    SCSI subsystem driver Revision: 1.00
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
    i2c-core.o: i2c core module version 2.8.0 (20030714)
    i2c-dev.o: i2c /dev entries driver module version 2.8.0 (20030714)
    i2c-proc.o version 2.8.0 (20030714)
    Initializing Cryptographic API
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 8192 buckets, 64Kbytes
    TCP: Hash tables configured (established 262144 bind 65536)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Cannot open root device "sda2" or 08:02
    Please append a correct "root=" boot option
    Kernel panic: VFS: Unable to mount root fs on 08:02

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Zwane Mwaikambo: "Re: 2.6.0 - Network doesn't come up."

    Relevant Pages

    • only a single core (out of 8) initialized
      ... this is 2.6.30-rc7 with a patch added to debug a nv sata driver incompatibility with the Intel SSDs on a tyan motherboard ... kernel direct mapping tables up to d7fd0000 @ 10000-16000 ... Allocating PCI resources starting at f1000000 ... CPU: L2 Cache: 1024K ...
      (Linux-Kernel)
    • Re: Intel Woodcrest Crash under heavy load with FC5 and MySql
      ... Here is some sample crash output, please bear in mind that 3ware claim no problem on their driver and have confirmed that I am using the correct versions of BIOS and 3ware drivers. ... spinlock wrong CPU on CPU#-135120464, ... Allocating PCI resources starting at c2000000 ... PCI: Sharing IRQ 11 with 0000:00:02.0 ...
      (Fedora)
    • Strange behaviour with SATA disks. Light always ON
      ... Allocating PCI resources starting at 80000000 ... CPU: After generic identify, caps: bfebfbff 20000000 ... CPU: Trace cache: 12K uops, ... Probing IDE interface ide0... ...
      (Linux-Kernel)
    • Firewire still bOrken (sigh)
      ... CPU: After generic identify, caps: 3febfbff ... PCI: PCI BIOS revision 2.10 entry at 0xfb2c0, ... Uniform Multi-Platform E-IDE driver Revision: ... protocol2 is for the firewire drives. ...
      (Linux-Kernel)
    • 2.6.9-rc2-mm2 ohci_hcd doesnt work
      ... Here's the USB stuff: ... USB Universal Host Controller Interface driver v2.2 ... CPU: Trace cache: 12K uops, ... PCI: PCI BIOS revision 2.10 entry at 0xf0094, ...
      (Linux-Kernel)