Re: 2.6.0 - Network doesn't come up.
From: Zwane Mwaikambo (zwane_at_arm.linux.org.uk)
Date: 10/02/03
- Previous message: Martin List-Petersen: "Serial ATA on Dell Dimension 8300 (Was: Re: Serial ATA support in 2.4.22)"
- In reply to: reg_at_dwf.com: "2.6.0 - Network doesn't come up."
- Next in thread: James Morris: "Re: 2.6.0 - Network doesn't come up."
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Thu, 2 Oct 2003 17:45:04 -0400 (EDT) To: reg@dwf.com
On Thu, 2 Oct 2003 reg@dwf.com wrote:
> OK, Im trying to run 2.6.0-test6 on top of RH9.
> I have progress in some areas but not others.
>
> NETWORKING. is a nogo.
>
> If I compile the driver 3c59x as a module, it gets loaded, but
> with the driver in the kernel or as a module, I get the messages
> in the messages file (during boot) or when I do a ./network start
> from /etc/rc.d/init.d
You may want to post your .config, i'm using 3c59x in kernel and have
working networking.
> [root@orion init.d]# ./network* restart
> Shutting down interface eth0: [ OK ]
> Shutting down loopback interface: [ OK ]
> Setting network parameters: [ OK ]
> Bringing up loopback interface: arping: socket: Address family not supported
> by protocol
> Error, some other host already uses address 127.0.0.1.
> [FAILED]
> Bringing up interface eth0: arping: socket: Address family not supported by
> protocol
> Error, some other host already uses address 204.134.2.19.
> [FAILED]
>
> ---
>
> Reg.Clemens
> reg@dwf.com
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Martin List-Petersen: "Serial ATA on Dell Dimension 8300 (Was: Re: Serial ATA support in 2.4.22)"
- In reply to: reg_at_dwf.com: "2.6.0 - Network doesn't come up."
- Next in thread: James Morris: "Re: 2.6.0 - Network doesn't come up."
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
