Re: HighPoint 374

From: Carlos Fernandez Sanz (cfs-lk_at_nisupu.com)
Date: 10/19/03

  • Next message: Tomi Orava: "Re: HighPoint 374" 
    To: "Tomi Orava" <Tomi.Orava@ncircle.nullnet.fi>
Date:	Sun, 19 Oct 2003 21:35:04 +0200

    Tomi,

    > Hmm, if I checked correctly, your motherboard (Asus CUSL2) doesn't seem to
    > include a HPT374 based (integrated) IDE-controller. Are you using some
    > add-on PCI-card for IDE ? If yes, are you using older style Parallel-ATA
    > or newer Serial-ATA interface ?

    I'm using HighPoint's RocketRaid 404 card (HPT374 based PCI card).

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Tomi Orava: "Re: HighPoint 374"

    Relevant Pages

    • Re: The ultimate TOE design
      ... sure, one could create a PCI card that takes a power-connector, but that ... TSO works on LAN-like environments, it doesn't ... i believe that there are better alternatives than TSO, but it involves NICs ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • 2.4 / 2.6 802.11g 54Mbs support ?
      ... 54 Mbs 802.11g compliant. ... I will be able to test the PCI card on both 2.4 and 2.6. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: hpt366 under hpt372N oops
      ... > I have an off board HighPoint RocketRAID 133 pci card. ... The chip is identified ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: The ultimate TOE design
      ... > sure, one could create a PCI card that takes a power-connector, but that ... At 1Ghz the Athlon Geode NX draws about 6W. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Hightpoint chipsets
      ... What's the current status of Highpoint RAID drivers, ... I was using a 2.4 kernel just fine with my HP474 PCI card. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)