NFS problems with through 2.5.x to 2.6.0-test9

From: Hannes Kinnari (i80766_at_UWasa.fi)
Date: 10/27/03

  • Next message: jw schultz: "Re: Heavy disk activity without apperant reason (added more info)"
    Date:	Mon, 27 Oct 2003 01:56:33 +0200 (EET)
    To: <linux-kernel@vger.kernel.org>
    
    

    Hello

    I've been testing the 2.5.x and 2.6.0-testX series every now and then, and
    so far they all seem to have problems with nfs on my network.

    Problem:

    I have my home dir nfs shared. When the server is running the
    2.4 kernel, as a client the 2.6 series seem to work perfectly, excluding
    the non-fatal messages I can see in the dmesg. They look something like
    this:

    (from the client's log)
    RPC: Can't bind to reserved port (13).
    RPC: can't bind to reserved port.
    nsm_mon_unmon: rpc failed, status=-5
    lockd: cannot monitor 192.168.0.1
    lockd: failed to monitor 192.168.0.1

    These messages repeat in this order several times - and so far I have at
    least detected that starting up some programs, Psi (a kde jabber
    client) for example, generates these but is not only limited to this
    particular program. (I get these with 2.6.0-test9 too) On the server side,
    there is no visible error messages.

    As I said, when server runs 2.4 and clients 2.5 or 2.6 things work fine
    except for those errors.

    Interesting problem arose when I attempted switch the server's kernel to
    2.6.

    I found that when I had only 1 client computer, everything worked as
    before. BUT when I booted a second computer, and logged in (using the
    same nfs mounted home but different user, of course) I immediately started
    getting errors loading programs, wallpaper loaded only halfway, if at all.
    Lots of "stale NFS socket" errors.

    There was no visible errors in dmesg on the server except for ocasional:

    RPC: requested 0, but used xxxx

    (the format might have been different, I forgot to paste it somewhere)

    ...where xxxx was a number. Now, all this time, the computer I had booted
    first (no matter which comp!), everything worked fine. It was always the
    second booted computer which had trouble.

    I tried both mount options udp and tcp with same results. I also tried
    with and without nfsv4 support compiled in (was considering testing it at
    some point). As far as I can see this is not probably hardware related
    but here are the comps I used:

    server:
    amd tb 1G / 512M of ram
    00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev
    03)
    00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b115
    00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
    (rev 40)
    00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
    00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16)
    00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16)
    00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
    (rev 40)
    00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
    RTL-8139/8139C (rev 10)
    00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
    RTL-8139/8139C (rev 10)
    01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev
    01)

    2 clients:
    p4 1,8G and 2,66G (NW) / both 512M
    Both have Asus p4b mb, the faster is with 533FSB.
    Both also have the same 3com NICs.

    00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
    (rev 11)
    00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge
    (rev 11)
    00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02)
    00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02)
    00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02)
    00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 02)
    00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 82)
    00:1f.0 ISA bridge: Intel Corp. 82801DB LPC Interface Controller (rev 02)
    00:1f.1 IDE interface: Intel Corp. 82801DB Ultra ATA Storage Controller
    (rev 02)
    00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 02)
    01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device
    4150
    01:00.1 Display controller: ATI Technologies Inc: Unknown device 4170
    02:03.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
    10)
    02:0e.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
    (rev 78)

    I have also ended up testing these with different gcc versions but still
    ending up with same results. Earlier I tried with gcc 3.2.x but right now
    I'm using 3.3.1. Distribution is gentoo with unstable tree
    (KEYWORDS="~x86") - in all of the computers, including the server. The
    /home on the server resides in LVM2, using reiserfs. The hard disks them
    selves are casual IDE drives. I do not recall if I have tried this with
    nfs compiled straight into kernel. Right now I have it in modules on both
    ends. The latest try with the 2.6.0-test9 was done with portmap version
    5b (ebuild -r7) and nfs-utils 1.0.6.

    I'd like to note that between the 2 "client" computers, I've tested nfs
    mounting and file transfers using 2.6 kernel and it seems to work fine.
    However, I haven't tried the /home mounting. (time is limited after all...
    :)

    Hopefully the problem could be pinpointed with this information. Thanks in
    advance.

    --Hannes

    P.S. Here is the server side kernel config (I doubt the problem resides in
    the client configuration since it works with the 2.4 kernel as server):

    #
    # Automatically generated make config: don't edit
    #
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_CLEAN_COMPILE=y
    CONFIG_STANDALONE=y
    CONFIG_BROKEN_ON_SMP=y

    #
    # General setup
    #
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_SYSCTL=y
    CONFIG_LOG_BUF_SHIFT=14
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_OBSOLETE_MODPARM=y
    CONFIG_MODVERSIONS=y
    CONFIG_KMOD=y

    #
    # Processor type and features
    #
    CONFIG_X86_PC=y
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUM4 is not set
    # CONFIG_MK6 is not set
    CONFIG_MK7=y
    # CONFIG_MK8 is not set
    # CONFIG_MELAN is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_USE_3DNOW=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    # CONFIG_SMP is not set
    CONFIG_PREEMPT=y
    CONFIG_X86_UP_APIC=y
    CONFIG_X86_UP_IOAPIC=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_NONFATAL=y
    # CONFIG_X86_MCE_P4THERMAL is not set
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    CONFIG_MICROCODE=m
    CONFIG_X86_MSR=y
    CONFIG_X86_CPUID=y
    # CONFIG_EDD is not set
    CONFIG_NOHIGHMEM=y
    # CONFIG_HIGHMEM4G is not set
    # CONFIG_HIGHMEM64G is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    CONFIG_HAVE_DEC_LOCK=y

    #
    # Power management options (ACPI, APM)
    #
    CONFIG_PM=y
    CONFIG_SOFTWARE_SUSPEND=y
    # CONFIG_PM_DISK is not set

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_SLEEP_PROC_FS=y
    # CONFIG_ACPI_AC is not set
    # CONFIG_ACPI_BATTERY is not set
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_TOSHIBA is not set
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    # CONFIG_ACPI_RELAXED_AML is not set

    #
    # APM (Advanced Power Management) BIOS Support
    #
    # CONFIG_APM is not set

    #
    # CPU Frequency scaling
    #
    # CONFIG_CPU_FREQ is not set

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    # CONFIG_PCI_LEGACY_PROC is not set
    CONFIG_PCI_NAMES=y
    # CONFIG_ISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set
    CONFIG_HOTPLUG=y

    #
    # PCMCIA/CardBus support
    #
    # CONFIG_PCMCIA is not set

    #
    # PCI Hotplug Support
    #
    CONFIG_HOTPLUG_PCI=y
    # CONFIG_HOTPLUG_PCI_FAKE is not set
    # CONFIG_HOTPLUG_PCI_COMPAQ is not set
    # CONFIG_HOTPLUG_PCI_IBM is not set
    CONFIG_HOTPLUG_PCI_ACPI=y
    # CONFIG_HOTPLUG_PCI_CPCI is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_MISC=y

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    CONFIG_FW_LOADER=m

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=y
    CONFIG_PARPORT_PC=y
    CONFIG_PARPORT_PC_CML1=y
    CONFIG_PARPORT_SERIAL=y
    CONFIG_PARPORT_PC_FIFO=y
    CONFIG_PARPORT_PC_SUPERIO=y
    # CONFIG_PARPORT_OTHER is not set
    CONFIG_PARPORT_1284=y

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    # CONFIG_ISAPNP is not set
    CONFIG_PNPBIOS=y

    #
    # Block devices
    #
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_PARIDE is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    CONFIG_BLK_DEV_NBD=m
    # CONFIG_BLK_DEV_RAM is not set
    # CONFIG_BLK_DEV_INITRD is not set
    CONFIG_LBD=y

    #
    # ATA/ATAPI/MFM/RLL support
    #
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    # CONFIG_IDEDISK_MULTI_MODE is not set
    # CONFIG_IDEDISK_STROKE is not set
    CONFIG_BLK_DEV_IDECD=m
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    CONFIG_BLK_DEV_IDESCSI=m
    CONFIG_IDE_TASK_IOCTL=y
    CONFIG_IDE_TASKFILE_IO=y

    #
    # IDE chipset support/bugfixes
    #
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=y
    # CONFIG_BLK_DEV_OPTI621 is not set
    CONFIG_BLK_DEV_RZ1000=y
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDE_TCQ is not set
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    # CONFIG_IDEDMA_PCI_WIP is not set
    CONFIG_BLK_DEV_ADMA=y
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    # CONFIG_BLK_DEV_PIIX is not set
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    CONFIG_BLK_DEV_VIA82CXXX=y
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_DMA_NONPCI is not set
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    CONFIG_SCSI=y
    # CONFIG_SCSI_PROC_FS is not set

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    # CONFIG_BLK_DEV_SD is not set
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=m
    # CONFIG_BLK_DEV_SR_VENDOR is not set
    CONFIG_CHR_DEV_SG=m

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_REPORT_LUNS is not set
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_SCSI_MEGARAID is not set
    # CONFIG_SCSI_SATA is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_CPQFCTS is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_IMM is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set

    #
    # Multi-device support (RAID and LVM)
    #
    CONFIG_MD=y
    # CONFIG_BLK_DEV_MD is not set
    CONFIG_BLK_DEV_DM=m
    CONFIG_DM_IOCTL_V4=y

    #
    # Fusion MPT device support
    #

    #
    # IEEE 1394 (FireWire) support (EXPERIMENTAL)
    #
    # CONFIG_IEEE1394 is not set

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Networking support
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    CONFIG_NETLINK_DEV=y
    CONFIG_UNIX=y
    CONFIG_NET_KEY=m
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    CONFIG_IP_MULTIPLE_TABLES=y
    CONFIG_IP_ROUTE_FWMARK=y
    CONFIG_IP_ROUTE_NAT=y
    CONFIG_IP_ROUTE_MULTIPATH=y
    CONFIG_IP_ROUTE_TOS=y
    CONFIG_IP_ROUTE_VERBOSE=y
    # CONFIG_IP_PNP is not set
    CONFIG_NET_IPIP=y
    CONFIG_NET_IPGRE=y
    CONFIG_NET_IPGRE_BROADCAST=y
    CONFIG_IP_MROUTE=y
    CONFIG_IP_PIMSM_V1=y
    CONFIG_IP_PIMSM_V2=y
    CONFIG_ARPD=y
    CONFIG_INET_ECN=y
    CONFIG_SYN_COOKIES=y
    CONFIG_INET_AH=m
    CONFIG_INET_ESP=m
    CONFIG_INET_IPCOMP=m

    #
    # IP: Virtual Server Configuration
    #
    # CONFIG_IP_VS is not set
    CONFIG_IPV6=m
    CONFIG_IPV6_PRIVACY=y
    CONFIG_INET6_AH=m
    CONFIG_INET6_ESP=m
    CONFIG_INET6_IPCOMP=m
    CONFIG_IPV6_TUNNEL=m
    # CONFIG_DECNET is not set
    # CONFIG_BRIDGE is not set
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set

    #
    # IP: Netfilter Configuration
    #
    CONFIG_IP_NF_CONNTRACK=y
    CONFIG_IP_NF_FTP=y
    CONFIG_IP_NF_IRC=y
    CONFIG_IP_NF_TFTP=y
    CONFIG_IP_NF_AMANDA=y
    CONFIG_IP_NF_QUEUE=y
    CONFIG_IP_NF_IPTABLES=y
    CONFIG_IP_NF_MATCH_LIMIT=y
    CONFIG_IP_NF_MATCH_IPRANGE=y
    CONFIG_IP_NF_MATCH_MAC=y
    CONFIG_IP_NF_MATCH_PKTTYPE=y
    CONFIG_IP_NF_MATCH_MARK=y
    CONFIG_IP_NF_MATCH_MULTIPORT=y
    CONFIG_IP_NF_MATCH_TOS=y
    CONFIG_IP_NF_MATCH_RECENT=y
    CONFIG_IP_NF_MATCH_ECN=y
    CONFIG_IP_NF_MATCH_DSCP=y
    CONFIG_IP_NF_MATCH_AH_ESP=y
    CONFIG_IP_NF_MATCH_LENGTH=y
    CONFIG_IP_NF_MATCH_TTL=y
    CONFIG_IP_NF_MATCH_TCPMSS=y
    CONFIG_IP_NF_MATCH_HELPER=y
    CONFIG_IP_NF_MATCH_STATE=y
    CONFIG_IP_NF_MATCH_CONNTRACK=y
    CONFIG_IP_NF_MATCH_OWNER=y
    CONFIG_IP_NF_FILTER=y
    CONFIG_IP_NF_TARGET_REJECT=y
    CONFIG_IP_NF_NAT=y
    CONFIG_IP_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=y
    CONFIG_IP_NF_TARGET_REDIRECT=y
    CONFIG_IP_NF_TARGET_NETMAP=y
    CONFIG_IP_NF_TARGET_SAME=y
    # CONFIG_IP_NF_NAT_LOCAL is not set
    CONFIG_IP_NF_NAT_SNMP_BASIC=y
    CONFIG_IP_NF_NAT_IRC=y
    CONFIG_IP_NF_NAT_FTP=y
    CONFIG_IP_NF_NAT_TFTP=y
    CONFIG_IP_NF_NAT_AMANDA=y
    CONFIG_IP_NF_MANGLE=y
    CONFIG_IP_NF_TARGET_TOS=y
    CONFIG_IP_NF_TARGET_ECN=y
    CONFIG_IP_NF_TARGET_DSCP=y
    CONFIG_IP_NF_TARGET_MARK=y
    CONFIG_IP_NF_TARGET_CLASSIFY=y
    CONFIG_IP_NF_TARGET_LOG=y
    CONFIG_IP_NF_TARGET_ULOG=y
    CONFIG_IP_NF_TARGET_TCPMSS=y
    CONFIG_IP_NF_ARPTABLES=y
    CONFIG_IP_NF_ARPFILTER=y
    CONFIG_IP_NF_ARP_MANGLE=y

    #
    # IPv6: Netfilter Configuration
    #
    CONFIG_IP6_NF_QUEUE=m
    CONFIG_IP6_NF_IPTABLES=m
    CONFIG_IP6_NF_MATCH_LIMIT=m
    CONFIG_IP6_NF_MATCH_MAC=m
    CONFIG_IP6_NF_MATCH_RT=m
    CONFIG_IP6_NF_MATCH_OPTS=m
    CONFIG_IP6_NF_MATCH_FRAG=m
    CONFIG_IP6_NF_MATCH_HL=m
    CONFIG_IP6_NF_MATCH_MULTIPORT=m
    CONFIG_IP6_NF_MATCH_OWNER=m
    CONFIG_IP6_NF_MATCH_MARK=m
    CONFIG_IP6_NF_MATCH_IPV6HEADER=m
    CONFIG_IP6_NF_MATCH_AHESP=m
    CONFIG_IP6_NF_MATCH_LENGTH=m
    CONFIG_IP6_NF_MATCH_EUI64=m
    CONFIG_IP6_NF_FILTER=m
    CONFIG_IP6_NF_TARGET_LOG=m
    CONFIG_IP6_NF_MANGLE=m
    CONFIG_IP6_NF_TARGET_MARK=m
    CONFIG_XFRM=y
    CONFIG_XFRM_USER=m

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    CONFIG_IPV6_SCTP__=m
    CONFIG_IP_SCTP=m
    # CONFIG_SCTP_ADLER32 is not set
    # CONFIG_SCTP_DBG_MSG is not set
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_HMAC_NONE is not set
    CONFIG_SCTP_HMAC_SHA1=y
    # CONFIG_SCTP_HMAC_MD5 is not set
    # CONFIG_ATM is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # CONFIG_NET_FASTROUTE is not set
    # CONFIG_NET_HW_FLOWCONTROL is not set

    #
    # QoS and/or fair queueing
    #
    CONFIG_NET_SCHED=y
    CONFIG_NET_SCH_CBQ=y
    CONFIG_NET_SCH_HTB=y
    CONFIG_NET_SCH_CSZ=y
    CONFIG_NET_SCH_PRIO=y
    CONFIG_NET_SCH_RED=y
    CONFIG_NET_SCH_SFQ=y
    CONFIG_NET_SCH_TEQL=y
    CONFIG_NET_SCH_TBF=y
    CONFIG_NET_SCH_GRED=y
    CONFIG_NET_SCH_DSMARK=y
    CONFIG_NET_SCH_INGRESS=y
    CONFIG_NET_QOS=y
    CONFIG_NET_ESTIMATOR=y
    CONFIG_NET_CLS=y
    CONFIG_NET_CLS_TCINDEX=y
    CONFIG_NET_CLS_ROUTE4=y
    CONFIG_NET_CLS_ROUTE=y
    CONFIG_NET_CLS_FW=y
    CONFIG_NET_CLS_U32=y
    CONFIG_NET_CLS_RSVP=y
    CONFIG_NET_CLS_RSVP6=y
    CONFIG_NET_CLS_POLICE=y

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    CONFIG_NETDEVICES=y

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set
    CONFIG_DUMMY=m
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_ETHERTAP is not set
    # CONFIG_NET_SB1000 is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=m
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    CONFIG_NET_VENDOR_3COM=y
    CONFIG_VORTEX=m
    CONFIG_TYPHOON=m

    #
    # Tulip family network device support
    #
    CONFIG_NET_TULIP=y
    # CONFIG_DE2104X is not set
    CONFIG_TULIP=m
    CONFIG_TULIP_MWI=y
    # CONFIG_TULIP_MMIO is not set
    # CONFIG_DE4X5 is not set
    # CONFIG_WINBOND_840 is not set
    # CONFIG_DM9102 is not set
    # CONFIG_HP100 is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_B44 is not set
    # CONFIG_DGRS is not set
    CONFIG_EEPRO100=m
    # CONFIG_EEPRO100_PIO is not set
    CONFIG_E100=m
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    CONFIG_NE2K_PCI=m
    CONFIG_8139CP=m
    CONFIG_8139TOO=m
    # CONFIG_8139TOO_PIO is not set
    # CONFIG_8139TOO_TUNE_TWISTER is not set
    # CONFIG_8139TOO_8129 is not set
    # CONFIG_8139_OLD_RX_RESET is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    CONFIG_VIA_RHINE=m
    CONFIG_VIA_RHINE_MMIO=y

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SIS190 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_TIGON3 is not set

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_IXGB is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PLIP is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set

    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set
    # CONFIG_NET_FC is not set
    # CONFIG_RCPCI is not set
    CONFIG_SHAPER=m

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set

    #
    # Amateur Radio support
    #
    # CONFIG_HAMRADIO is not set

    #
    # IrDA (infrared) support
    #
    # CONFIG_IRDA is not set

    #
    # Bluetooth support
    #
    # CONFIG_BT is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN_BOOL is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    CONFIG_INPUT_EVDEV=y
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input I/O drivers
    #
    # CONFIG_GAMEPORT is not set
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PARKBD is not set
    # CONFIG_SERIO_PCIPS2 is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    # CONFIG_MOUSE_PS2_SYNAPTICS is not set
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    # CONFIG_SERIAL_8250_CONSOLE is not set
    # CONFIG_SERIAL_8250_ACPI is not set
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_UNIX98_PTYS=y
    CONFIG_UNIX98_PTY_COUNT=256
    CONFIG_PRINTER=y
    CONFIG_LP_CONSOLE=y
    CONFIG_PPDEV=m
    # CONFIG_TIPAR is not set

    #
    # I2C support
    #
    # CONFIG_I2C is not set

    #
    # I2C Algorithms
    #

    #
    # I2C Hardware Bus support
    #

    #
    # I2C Hardware Sensors Chip support
    #
    # CONFIG_I2C_SENSOR is not set

    #
    # Mice
    #
    # CONFIG_BUSMOUSE is not set
    # CONFIG_QIC02_TAPE is not set

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    CONFIG_HW_RANDOM=y
    CONFIG_NVRAM=m
    CONFIG_RTC=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set
    CONFIG_AGP=y
    # CONFIG_AGP_ALI is not set
    # CONFIG_AGP_ATI is not set
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    # CONFIG_AGP_INTEL is not set
    # CONFIG_AGP_NVIDIA is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    CONFIG_AGP_VIA=y
    CONFIG_DRM=y
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_GAMMA is not set
    # CONFIG_DRM_R128 is not set
    # CONFIG_DRM_RADEON is not set
    CONFIG_DRM_MGA=m
    # CONFIG_DRM_SIS is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    CONFIG_HANGCHECK_TIMER=y

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set

    #
    # Graphics support
    #
    CONFIG_FB=y
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_IMSTT is not set
    # CONFIG_FB_VGA16 is not set
    # CONFIG_FB_VESA is not set
    CONFIG_VIDEO_SELECT=y
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_RIVA is not set
    CONFIG_FB_MATROX=y
    # CONFIG_FB_MATROX_MILLENIUM is not set
    # CONFIG_FB_MATROX_MYSTIQUE is not set
    CONFIG_FB_MATROX_G450=y
    CONFIG_FB_MATROX_G100=y
    # CONFIG_FB_MATROX_MULTIHEAD is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_VIRTUAL is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    CONFIG_PCI_CONSOLE=y
    # CONFIG_FONTS is not set
    CONFIG_FONT_8x8=y
    CONFIG_FONT_8x16=y

    #
    # Logo configuration
    #
    # CONFIG_LOGO is not set

    #
    # Sound
    #
    CONFIG_SOUND=y

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=m
    CONFIG_SND_SEQUENCER=m
    # CONFIG_SND_SEQ_DUMMY is not set
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=m
    CONFIG_SND_PCM_OSS=m
    CONFIG_SND_SEQUENCER_OSS=y
    CONFIG_SND_RTCTIMER=m
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_VIRMIDI is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set

    #
    # PCI devices
    #
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    # CONFIG_SND_INTEL8X0 is not set
    # CONFIG_SND_SONICVIBES is not set
    CONFIG_SND_VIA82XX=m
    # CONFIG_SND_VX222 is not set

    #
    # ALSA USB devices
    #
    # CONFIG_SND_USB_AUDIO is not set

    #
    # Open Sound System
    #
    # CONFIG_SOUND_PRIME is not set

    #
    # USB support
    #
    CONFIG_USB=y
    # CONFIG_USB_DEBUG is not set

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    CONFIG_USB_BANDWIDTH=y
    CONFIG_USB_DYNAMIC_MINORS=y

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=y
    CONFIG_USB_OHCI_HCD=m
    CONFIG_USB_UHCI_HCD=m

    #
    # USB Device Class drivers
    #
    # CONFIG_USB_AUDIO is not set
    # CONFIG_USB_BLUETOOTH_TTY is not set
    # CONFIG_USB_MIDI is not set
    # CONFIG_USB_ACM is not set
    CONFIG_USB_PRINTER=m
    # CONFIG_USB_STORAGE is not set

    #
    # USB Human Interface Devices (HID)
    #
    CONFIG_USB_HID=y
    CONFIG_USB_HIDINPUT=y
    # CONFIG_HID_FF is not set
    CONFIG_USB_HIDDEV=y
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_XPAD is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    CONFIG_USB_SCANNER=m
    # CONFIG_USB_MICROTEK is not set
    # CONFIG_USB_HPUSBSCSI is not set

    #
    # USB Multimedia devices
    #
    # CONFIG_USB_DABUSB is not set

    #
    # Video4Linux support is needed for USB Multimedia device support
    #

    #
    # USB Network adaptors
    #
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET is not set

    #
    # USB port drivers
    #
    # CONFIG_USB_USS720 is not set

    #
    # USB Serial Converter support
    #
    # CONFIG_USB_SERIAL is not set

    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_TIGL is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_BRLVGER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_TEST is not set
    # CONFIG_USB_GADGET is not set

    #
    # File systems
    #
    CONFIG_EXT2_FS=m
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    CONFIG_EXT3_FS=m
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    CONFIG_JBD=m
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=m
    CONFIG_REISERFS_FS=y
    # CONFIG_REISERFS_CHECK is not set
    # CONFIG_REISERFS_PROC_INFO is not set
    CONFIG_JFS_FS=m
    CONFIG_JFS_POSIX_ACL=y
    # CONFIG_JFS_DEBUG is not set
    # CONFIG_JFS_STATISTICS is not set
    CONFIG_FS_POSIX_ACL=y
    CONFIG_XFS_FS=m
    CONFIG_XFS_RT=y
    CONFIG_XFS_QUOTA=y
    CONFIG_XFS_POSIX_ACL=y
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    # CONFIG_QUOTA is not set
    CONFIG_QUOTACTL=y
    # CONFIG_AUTOFS_FS is not set
    CONFIG_AUTOFS4_FS=y

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=m
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_ZISOFS_FS=m
    CONFIG_UDF_FS=m

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=m
    CONFIG_MSDOS_FS=m
    CONFIG_VFAT_FS=m
    CONFIG_NTFS_FS=m
    # CONFIG_NTFS_DEBUG is not set
    CONFIG_NTFS_RW=y

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_DEVFS_FS=y
    CONFIG_DEVFS_MOUNT=y
    # CONFIG_DEVFS_DEBUG is not set
    CONFIG_DEVPTS_FS=y
    CONFIG_DEVPTS_FS_XATTR=y
    CONFIG_DEVPTS_FS_SECURITY=y
    CONFIG_TMPFS=y
    CONFIG_HUGETLBFS=y
    CONFIG_HUGETLB_PAGE=y
    CONFIG_RAMFS=y

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    CONFIG_NFS_FS=m
    CONFIG_NFS_V3=y
    CONFIG_NFS_V4=y
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=m
    CONFIG_NFSD_V3=y
    CONFIG_NFSD_V4=y
    CONFIG_NFSD_TCP=y
    CONFIG_LOCKD=m
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=m
    CONFIG_SUNRPC=m
    CONFIG_SUNRPC_GSS=m
    CONFIG_RPCSEC_GSS_KRB5=m
    CONFIG_SMB_FS=m
    CONFIG_SMB_NLS_DEFAULT=y
    CONFIG_SMB_NLS_REMOTE="iso8859-1"
    CONFIG_CIFS=m
    # CONFIG_NCP_FS is not set
    CONFIG_CODA_FS=m
    # CONFIG_CODA_FS_OLD_API is not set
    # CONFIG_INTERMEZZO_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y
    CONFIG_SMB_NLS=y
    CONFIG_NLS=y

    #
    # Native Language Support
    #
    CONFIG_NLS_DEFAULT="utf8"
    CONFIG_NLS_CODEPAGE_437=m
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    CONFIG_NLS_CODEPAGE_850=y
    CONFIG_NLS_CODEPAGE_852=y
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    CONFIG_NLS_CODEPAGE_936=m
    CONFIG_NLS_CODEPAGE_950=m
    CONFIG_NLS_CODEPAGE_932=m
    CONFIG_NLS_CODEPAGE_949=m
    CONFIG_NLS_CODEPAGE_874=m
    CONFIG_NLS_ISO8859_8=m
    CONFIG_NLS_CODEPAGE_1250=m
    CONFIG_NLS_CODEPAGE_1251=m
    CONFIG_NLS_ISO8859_1=y
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    CONFIG_NLS_ISO8859_15=y
    CONFIG_NLS_KOI8_R=m
    CONFIG_NLS_KOI8_U=m
    CONFIG_NLS_UTF8=y

    #
    # Profiling support
    #
    # CONFIG_PROFILING is not set

    #
    # Kernel hacking
    #
    # CONFIG_DEBUG_KERNEL is not set
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_FRAME_POINTER is not set
    CONFIG_X86_EXTRA_IRQS=y
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y

    #
    # Security options
    #
    CONFIG_SECURITY=y
    CONFIG_SECURITY_NETWORK=y
    CONFIG_SECURITY_CAPABILITIES=y
    CONFIG_SECURITY_ROOTPLUG=m
    # CONFIG_SECURITY_SELINUX is not set

    #
    # Cryptographic options
    #
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=m
    CONFIG_CRYPTO_SHA1=m
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    CONFIG_CRYPTO_DES=m
    CONFIG_CRYPTO_BLOWFISH=m
    CONFIG_CRYPTO_TWOFISH=m
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_AES=m
    CONFIG_CRYPTO_CAST5=m
    CONFIG_CRYPTO_CAST6=m
    CONFIG_CRYPTO_DEFLATE=m
    CONFIG_CRYPTO_TEST=m

    #
    # Library routines
    #
    CONFIG_CRC32=m
    CONFIG_ZLIB_INFLATE=m
    CONFIG_ZLIB_DEFLATE=m
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_PC=y

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/


  • Next message: jw schultz: "Re: Heavy disk activity without apperant reason (added more info)"