CMD640 ide driver made to work
From: Stefan Talpalaru (stefantalpalaru_at_yahoo.com)
Date: 10/27/03
- Previous message: Andi Kleen: "Re: [2.6.0-test8/9] ethertap oops"
- Next in thread: Bartlomiej Zolnierkiewicz: "Re: CMD640 ide driver made to work"
- Reply: Bartlomiej Zolnierkiewicz: "Re: CMD640 ide driver made to work"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Mon, 27 Oct 2003 04:26:52 -0800 (PST) To: andre@linux-ide.org
Hi Andre!
I own an old 486 box with a CMD640 chipset on it. It works just fine
under
the 2.2.x kernel, but not under the 2.4.x series. I modified the
"cmd640"
driver so it works and I have tested it on my hardware.
This patch is for the 2.4.22 kernel.
diff -urN linux-2.4.22/Documentation/Configure.help
linux-2.4.22-new/Documentation/Configure.help
--- linux-2.4.22/Documentation/Configure.help 2003-09-10
17:39:41.000000000 +0000
+++ linux-2.4.22-new/Documentation/Configure.help 2003-10-26
14:14:12.000000000 +0000
@@ -916,14 +916,6 @@
the "CSA-6400E PCI to IDE controller" that some people have. For
details, read <file:Documentation/ide.txt>.
-CMD640 enhanced support
-CONFIG_BLK_DEV_CMD640_ENHANCED
- This option includes support for setting/autotuning PIO modes and
- prefetch on CMD640 IDE interfaces. For details, read
- <file:Documentation/ide.txt>. If you have a CMD640 IDE interface
- and your BIOS does not already do this for you, then say Y here.
- Otherwise say N.
-
RZ1000 chipset bugfix/support
CONFIG_BLK_DEV_RZ1000
The PC-Technologies RZ1000 IDE chip is used on many common 486 and
diff -urN linux-2.4.22/drivers/ide/Config.in
linux-2.4.22-new/drivers/ide/Config.in
--- linux-2.4.22/drivers/ide/Config.in 2003-09-10 17:49:50.000000000
+0000
+++ linux-2.4.22-new/drivers/ide/Config.in 2003-10-18
21:43:37.000000000 +0000
@@ -28,7 +28,6 @@
comment 'IDE chipset support/bugfixes'
if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' CMD640 chipset bugfix/support' CONFIG_BLK_DEV_CMD640
$CONFIG_X86
- dep_bool ' CMD640 enhanced support'
CONFIG_BLK_DEV_CMD640_ENHANCED $CONFIG_BLK_DEV_CMD640
dep_bool ' ISA-PNP EIDE support' CONFIG_BLK_DEV_ISAPNP
$CONFIG_ISAPNP
if [ "$CONFIG_PCI" = "y" ]; then
bool ' PCI IDE chipset support' CONFIG_BLK_DEV_IDEPCI
diff -urN linux-2.4.22/drivers/ide/pci/cmd640.c
linux-2.4.22-new/drivers/ide/pci/cmd640.c
--- linux-2.4.22/drivers/ide/pci/cmd640.c 2003-09-10 17:49:55.000000000
+0000
+++ linux-2.4.22-new/drivers/ide/pci/cmd640.c 2003-10-26
17:07:07.000000000 +0000
@@ -1,12 +1,14 @@
/*
- * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
+ * linux/drivers/ide/pci/cmd640.c Version 2.00 Oct 26, 2003
*
- * Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
+ * Copyright (C) 1995-2003 Linus Torvalds & authors (see below)
*/
/*
* Original authors: abramov@cecmow.enet.dec.com (Igor Abramov)
* mlord@pobox.com (Mark Lord)
+ * The guy that made it work in the 2.4.x kernel:
+ * stefantalpalaru@yahoo.com (Stefan Talpalaru)
*
* See linux/MAINTAINERS for address of current maintainer.
*
@@ -96,6 +98,8 @@
* ("fast" is necessary for 32bit I/O in some systems)
* Version 1.02 fix bug that resulted in slow "setup times"
* (patch courtesy of Zoltan Hidvegi)
+ * Version 2.00 it seems that this driver never worked in the
2.4.x
+ * kernel series. This version fixes this
problem.
*/
#undef REALLY_SLOW_IO /* most systems can safely undef this */
@@ -111,12 +115,13 @@
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
+#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>
-
#include <asm/io.h>
#include "ide_modes.h"
+#include "cmd640.h"
/*
* This flag is set in ide.c by the parameter: ide0=cmd640_vlb
@@ -171,42 +176,42 @@
/*
* Registers and masks for easy access by drive index:
*/
-static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
-static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1,
ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-
-static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
-static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23};
+static u8 prefetch_regs[4] = { CNTRL, CNTRL, ARTTIM23, ARTTIM23 };
+static u8 prefetch_masks[4] =
+ { CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3
};
+static u8 arttim_regs[4] = { ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23 };
+static u8 drwtim_regs[4] = { DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23 };
/*
* Current cmd640 timing values for each drive.
* The defaults for each are the slowest possible timings.
*/
-static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup
count (in clocks) */
-static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count
(encoded) */
-static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count
(encoded) */
-
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-/*
- * These are initialized to point at the devices we control
- */
-static ide_hwif_t *cmd_hwif0, *cmd_hwif1;
-static ide_drive_t *cmd_drives[4];
+static u8 setup_counts[4] = { 4, 4, 4, 4 }; /* Address setup count (in
clocks) */
+static u8 active_counts[4] = { 16, 16, 16, 16 }; /* Active count
(encoded) */
+static u8 recovery_counts[4] = { 16, 16, 16, 16 }; /* Recovery count
(encoded) */
/*
* Interface to access cmd640x registers
*/
static unsigned int cmd640_key;
-static void (*__put_cmd640_reg)(u16 reg, u8 val);
-static u8 (*__get_cmd640_reg)(u16 reg);
+static void (*put_cmd640_reg) (u16 reg, u8 val);
+static u8 (*get_cmd640_reg) (u16 reg);
/*
* This is read from the CFR reg, and is used in several places.
*/
static unsigned int cmd640_chip_version;
+static inline int
+calculate_index (ide_drive_t * drive)
+{
+ ide_hwif_t *hwif = HWIF (drive);
+ int channel = (int) hwif->channel;
+ int slave = (hwif->drives != drive);
+
+ return 2 * channel + slave;
+}
+
/*
* The CMD640x chip does not support DWORD config write cycles, but
some
* of the BIOSes use them to implement the config services.
@@ -215,100 +220,114 @@
/* PCI method 1 access */
-static void put_cmd640_reg_pci1 (u16 reg, u8 val)
+static void
+put_cmd640_reg_pci1 (u16 reg, u8 val)
{
- outb_p((reg & 0xfc) | cmd640_key, 0xcf8);
- outb_p(val, (reg & 3) | 0xcfc);
+ unsigned long flags;
+
+ spin_lock_irqsave (&ide_lock, flags);
+ outl_p ((reg & 0xfc) | cmd640_key, 0xcf8);
+ outb_p (val, (reg & 3) | 0xcfc);
+ spin_unlock_irqrestore (&ide_lock, flags);
}
-static u8 get_cmd640_reg_pci1 (u16 reg)
+static u8
+get_cmd640_reg_pci1 (u16 reg)
{
- outb_p((reg & 0xfc) | cmd640_key, 0xcf8);
- return inb_p((reg & 3) | 0xcfc);
+ u8 b;
+ unsigned long flags;
+
+ spin_lock_irqsave (&ide_lock, flags);
+ outl_p ((reg & 0xfc) | cmd640_key, 0xcf8);
+ b = inb_p ((reg & 3) | 0xcfc);
+ spin_unlock_irqrestore (&ide_lock, flags);
+ return b;
}
/* PCI method 2 access (from CMD data***) */
-static void put_cmd640_reg_pci2 (u16 reg, u8 val)
+static void
+put_cmd640_reg_pci2 (u16 reg, u8 val)
{
- outb_p(0x10, 0xcf8);
- outb_p(val, cmd640_key + reg);
- outb_p(0, 0xcf8);
+ unsigned long flags;
+
+ spin_lock_irqsave (&ide_lock, flags);
+ outb_p (0x10, 0xcf8);
+ outb_p (val, cmd640_key + reg);
+ outb_p (0, 0xcf8);
+ spin_unlock_irqrestore (&ide_lock, flags);
}
-static u8 get_cmd640_reg_pci2 (u16 reg)
+static u8
+get_cmd640_reg_pci2 (u16 reg)
{
u8 b;
+ unsigned long flags;
- outb_p(0x10, 0xcf8);
- b = inb_p(cmd640_key + reg);
- outb_p(0, 0xcf8);
+ spin_lock_irqsave (&ide_lock, flags);
+ outb_p (0x10, 0xcf8);
+ b = inb_p (cmd640_key + reg);
+ outb_p (0, 0xcf8);
+ spin_unlock_irqrestore (&ide_lock, flags);
return b;
}
/* VLB access */
-static void put_cmd640_reg_vlb (u16 reg, u8 val)
+static void
+put_cmd640_reg_vlb (u16 reg, u8 val)
{
- outb_p(reg, cmd640_key);
- outb_p(val, cmd640_key + 4);
-}
+ unsigned long flags;
-static u8 get_cmd640_reg_vlb (u16 reg)
-{
- outb_p(reg, cmd640_key);
- return inb_p(cmd640_key + 4);
+ spin_lock_irqsave (&ide_lock, flags);
+ outb_p (reg, cmd640_key);
+ outb_p (val, cmd640_key + 4);
+ spin_unlock_irqrestore (&ide_lock, flags);
}
-static u8 get_cmd640_reg(u16 reg)
+static u8
+get_cmd640_reg_vlb (u16 reg)
{
u8 b;
unsigned long flags;
- spin_lock_irqsave(&ide_lock, flags);
- b = __get_cmd640_reg(reg);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_lock_irqsave (&ide_lock, flags);
+ outb_p (reg, cmd640_key);
+ b = inb_p (cmd640_key + 4);
+ spin_unlock_irqrestore (&ide_lock, flags);
return b;
}
-static void put_cmd640_reg(u16 reg, u8 val)
+static int __init
+match_pci_cmd640_device (void)
{
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- __put_cmd640_reg(reg,val);
- spin_unlock_irqrestore(&ide_lock, flags);
-}
-
-static int __init match_pci_cmd640_device (void)
-{
- const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
+ const u8 ven_dev[4] = { 0x95, 0x10, 0x40, 0x06 };
unsigned int i;
for (i = 0; i < 4; i++) {
- if (get_cmd640_reg(i) != ven_dev[i])
+ if (get_cmd640_reg (i) != ven_dev[i])
return 0;
}
#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT
- if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) {
- printk("ide: cmd640 on PCI disabled by BIOS\n");
+ if ((get_cmd640_reg (PCMD) & PCMD_ENA) == 0) {
+ printk ("ide: cmd640 on PCI disabled by BIOS\n");
return 0;
}
-#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */
- return 1; /* success */
+#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */
+ return 1; /* success */
}
/*
* Probe for CMD640x -- pci method 1
*/
-static int __init probe_for_cmd640_pci1 (void)
+static int __init
+probe_for_cmd640_pci1 (void)
{
- __get_cmd640_reg = get_cmd640_reg_pci1;
- __put_cmd640_reg = put_cmd640_reg_pci1;
- for (cmd640_key = 0x80000000;
- cmd640_key <= 0x8000f800;
+ get_cmd640_reg = get_cmd640_reg_pci1;
+ put_cmd640_reg = put_cmd640_reg_pci1;
+ for (cmd640_key = 0x80000000; cmd640_key <= 0x8000f800;
cmd640_key += 0x800) {
- if (match_pci_cmd640_device())
- return 1; /* success */
+ if (match_pci_cmd640_device ())
+ return 1; /* success */
}
return 0;
}
@@ -316,13 +335,14 @@
/*
* Probe for CMD640x -- pci method 2
*/
-static int __init probe_for_cmd640_pci2 (void)
+static int __init
+probe_for_cmd640_pci2 (void)
{
- __get_cmd640_reg = get_cmd640_reg_pci2;
- __put_cmd640_reg = put_cmd640_reg_pci2;
+ get_cmd640_reg = get_cmd640_reg_pci2;
+ put_cmd640_reg = put_cmd640_reg_pci2;
for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100)
{
- if (match_pci_cmd640_device())
- return 1; /* success */
+ if (match_pci_cmd640_device ())
+ return 1; /* success */
}
return 0;
}
@@ -330,63 +350,66 @@
/*
* Probe for CMD640x -- vlb
*/
-static int __init probe_for_cmd640_vlb (void)
+static int __init
+probe_for_cmd640_vlb (void)
{
u8 b;
- __get_cmd640_reg = get_cmd640_reg_vlb;
- __put_cmd640_reg = put_cmd640_reg_vlb;
+ get_cmd640_reg = get_cmd640_reg_vlb;
+ put_cmd640_reg = put_cmd640_reg_vlb;
cmd640_key = 0x178;
- b = get_cmd640_reg(CFR);
+ b = get_cmd640_reg (CFR);
if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) {
cmd640_key = 0x78;
- b = get_cmd640_reg(CFR);
+ b = get_cmd640_reg (CFR);
if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h))
return 0;
}
- return 1; /* success */
+ return 1; /* success */
}
/*
* Returns 1 if an IDE interface/drive exists at 0x170,
* Returns 0 otherwise.
*/
-static int __init secondary_port_responding (void)
+static int __init
+secondary_port_responding (void)
{
unsigned long flags;
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave (&ide_lock, flags);
- outb_p(0x0a, 0x170 + IDE_SELECT_OFFSET); /* select drive0 */
- udelay(100);
- if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x0a) {
- outb_p(0x1a, 0x170 + IDE_SELECT_OFFSET); /* select drive1 */
- udelay(100);
- if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x1a) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return 0; /* nothing responded */
+ outb_p (0x0a, 0x170 + IDE_SELECT_OFFSET); /* select drive0 */
+ udelay (100);
+ if ((inb_p (0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x0a) {
+ outb_p (0x1a, 0x170 + IDE_SELECT_OFFSET); /* select drive1 */
+ udelay (100);
+ if ((inb_p (0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x1a) {
+ spin_unlock_irqrestore (&ide_lock, flags);
+ return 0; /* nothing responded */
}
}
- spin_unlock_irqrestore(&ide_lock, flags);
- return 1; /* success */
+ spin_unlock_irqrestore (&ide_lock, flags);
+ return 1; /* success */
}
#ifdef CMD640_DUMP_REGS
/*
* Dump out all cmd640 registers. May be called from ide.c
*/
-static void cmd640_dump_regs (void)
+static void __init
+cmd640_dump_regs (void)
{
unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
/* Dump current state of chip registers */
- printk("ide: cmd640 internal register dump:");
+ printk ("ide: cmd640 internal register dump:");
for (; reg <= 0x59; reg++) {
if (!(reg & 0x0f))
- printk("\n%04x:", reg);
- printk(" %02x", get_cmd640_reg(reg));
+ printk ("\n%04x:", reg);
+ printk (" %02x", get_cmd640_reg (reg));
}
- printk("\n");
+ printk ("\n");
}
#endif
@@ -394,12 +417,14 @@
* Check whether prefetch is on for a drive,
* and initialize the unmask flags for safe operation.
*/
-static void __init check_prefetch (unsigned int index)
+static void __init
+check_prefetch (ide_drive_t * drive)
{
- ide_drive_t *drive = cmd_drives[index];
- u8 b = get_cmd640_reg(prefetch_regs[index]);
+ int index = calculate_index (drive);
+ u8 b = get_cmd640_reg (prefetch_regs[index]);
- if (b & prefetch_masks[index]) { /* is prefetch off? */
+ if (b & prefetch_masks[index]) {
+ /* is prefetch off? */
drive->no_unmask = 0;
drive->no_io_32bit = 1;
drive->io_32bit = 0;
@@ -413,44 +438,20 @@
}
/*
- * Figure out which devices we control
- */
-static void __init setup_device_ptrs (void)
-{
- unsigned int i;
-
- cmd_hwif0 = &ide_hwifs[0]; /* default, if not found below */
- cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */
- for (i = 0; i < MAX_HWIFS; i++) {
- ide_hwif_t *hwif = &ide_hwifs[i];
- if (hwif->chipset == ide_unknown || hwif->chipset == ide_generic) {
- if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0)
- cmd_hwif0 = hwif;
- else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170)
- cmd_hwif1 = hwif;
- }
- }
- cmd_drives[0] = &cmd_hwif0->drives[0];
- cmd_drives[1] = &cmd_hwif0->drives[1];
- cmd_drives[2] = &cmd_hwif1->drives[0];
- cmd_drives[3] = &cmd_hwif1->drives[1];
-}
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-
-/*
* Sets prefetch mode for a drive.
*/
-static void set_prefetch_mode (unsigned int index, int mode)
+static void
+set_prefetch_mode (ide_drive_t * drive, int mode)
{
- ide_drive_t *drive = cmd_drives[index];
+ int index = calculate_index (drive);
int reg = prefetch_regs[index];
u8 b;
unsigned long flags;
- spin_lock_irqsave(&ide_lock, flags);
- b = __get_cmd640_reg(reg);
- if (mode) { /* want prefetch on? */
+ spin_lock_irqsave (&ide_lock, flags);
+ b = get_cmd640_reg (reg);
+ if (mode) {
+ /* want prefetch on? */
#if CMD640_PREFETCH_MASKS
drive->no_unmask = 1;
drive->unmask = 0;
@@ -463,15 +464,17 @@
drive->io_32bit = 0;
b |= prefetch_masks[index]; /* disable prefetch */
}
- __put_cmd640_reg(reg, b);
- spin_unlock_irqrestore(&ide_lock, flags);
+ put_cmd640_reg (reg, b);
+ spin_unlock_irqrestore (&ide_lock, flags);
}
/*
* Dump out current drive clocks settings
*/
-static void display_clocks (unsigned int index)
+static void __init
+display_clocks (ide_drive_t * drive)
{
+ int index = calculate_index (drive);
u8 active_count, recovery_count;
active_count = active_counts[index];
@@ -481,15 +484,17 @@
if (active_count > 3 && recovery_count == 1)
++recovery_count;
if (cmd640_chip_version > 1)
- recovery_count += 1; /* cmd640b uses (count + 1)*/
- printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count,
recovery_count);
+ recovery_count += 1; /* cmd640b uses (count + 1) */
+ printk (", clocks=%d/%d/%d\n", setup_counts[index], active_count,
+ recovery_count);
}
/*
* Pack active and recovery counts into single byte representation
* used by controller
*/
-inline static u8 pack_nibbles (u8 upper, u8 lower)
+inline static u8
+pack_nibbles (u8 upper, u8 lower)
{
return ((upper & 0x0f) << 4) | (lower & 0x0f);
}
@@ -497,41 +502,52 @@
/*
* This routine retrieves the initial drive timings from the chipset.
*/
-static void __init retrieve_drive_counts (unsigned int index)
+static void __init
+retrieve_drive_counts (ide_drive_t * drive)
{
+ int index = calculate_index (drive);
u8 b;
/*
* Get the internal setup timing, and convert to clock count
*/
- b = get_cmd640_reg(arttim_regs[index]) & ~0x3f;
+ b = get_cmd640_reg (arttim_regs[index]) & ~0x3f;
switch (b) {
- case 0x00: b = 4; break;
- case 0x80: b = 3; break;
- case 0x40: b = 2; break;
- default: b = 5; break;
+ case 0x00:
+ b = 4;
+ break;
+ case 0x80:
+ b = 3;
+ break;
+ case 0x40:
+ b = 2;
+ break;
+ default:
+ b = 5;
+ break;
}
setup_counts[index] = b;
/*
* Get the active/recovery counts
*/
- b = get_cmd640_reg(drwtim_regs[index]);
- active_counts[index] = (b >> 4) ? (b >> 4) : 0x10;
+ b = get_cmd640_reg (drwtim_regs[index]);
+ active_counts[index] = (b >> 4) ? (b >> 4) : 0x10;
recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10;
}
-
/*
* This routine writes the prepared setup/active/recovery counts
* for a drive into the cmd640 chipset registers to active them.
*/
-static void program_drive_counts (unsigned int index)
+static void
+program_drive_counts (ide_drive_t * drive, int setup_count, int
active_count,
+ int recovery_count)
{
unsigned long flags;
- u8 setup_count = setup_counts[index];
- u8 active_count = active_counts[index];
- u8 recovery_count = recovery_counts[index];
+ ide_drive_t *drives = HWIF (drive)->drives;
+ int channel = (int) HWIF (drive)->channel;
+ int index = calculate_index (drive);
/*
* Set up address setup count and drive read/write timing registers.
@@ -539,56 +555,87 @@
* each drive. Secondary interface has one common set of registers,
* so we merge the timings, using the slowest value for each timing.
*/
- if (index > 1) {
- unsigned int mate;
- if (cmd_drives[mate = index ^ 1]->present) {
- if (setup_count < setup_counts[mate])
- setup_count = setup_counts[mate];
- if (active_count < active_counts[mate])
- active_count = active_counts[mate];
- if (recovery_count < recovery_counts[mate])
- recovery_count = recovery_counts[mate];
- }
+ if (channel) {
+ drive->drive_data = setup_count;
+ setup_count = IDE_MAX (drives[0].drive_data,
+ drives[1].drive_data);
}
/*
- * Convert setup_count to internal chipset representation
+ * Convert values to internal chipset representation
*/
switch (setup_count) {
- case 4: setup_count = 0x00; break;
- case 3: setup_count = 0x80; break;
- case 1:
- case 2: setup_count = 0x40; break;
- default: setup_count = 0xc0; /* case 5 */
+ case 4:
+ setup_count = 0x00;
+ break;
+ case 3:
+ setup_count = 0x80;
+ break;
+ case 1:
+ case 2:
+ setup_count = 0x40;
+ break;
+ default:
+ setup_count = 0xc0; /* case 5 */
}
/*
* Now that everything is ready, program the new timings
*/
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave (&ide_lock, flags);
/*
* Program the address_setup clocks into ARTTIM reg,
* and then the active/recovery counts into the DRWTIM reg
* (this converts counts of 16 into counts of zero -- okay).
*/
- setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f;
- __put_cmd640_reg(arttim_regs[index], setup_count);
- __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count,
recovery_count));
- spin_unlock_irqrestore(&ide_lock, flags);
+ setup_count |= get_cmd640_reg (arttim_regs[index]) & 0x3f;
+ put_cmd640_reg (arttim_regs[index], setup_count);
+ put_cmd640_reg (drwtim_regs[index],
+ pack_nibbles (active_count, recovery_count));
+ spin_unlock_irqrestore (&ide_lock, flags);
}
/*
- * Set a specific pio_mode for a drive
+ * Drive PIO mode selection:
*/
-static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned
int cycle_time)
+static void
+cmd640_tuneproc (ide_drive_t * drive, u8 mode_wanted)
{
- int setup_time, active_time, recovery_time, clock_time;
- u8 setup_count, active_count, recovery_count, recovery_count2,
cycle_count;
- int bus_speed = system_bus_clock();
+ int setup_time, active_time, recovery_time;
+ int clock_time, pio_mode, cycle_time;
+ u8 recovery_count2, cycle_count, b;
+ int setup_count, active_count, recovery_count;
+ int bus_speed = system_bus_clock ();
+ ide_pio_data_t d;
+
+ switch (mode_wanted) {
+ case 6: /* set fast-devsel off */
+ case 7: /* set fast-devsel on */
+ mode_wanted &= 1;
+ b = get_cmd640_reg (CNTRL) & ~0x27;
+ if (mode_wanted)
+ b |= 0x27;
+ put_cmd640_reg (CNTRL, b);
+ printk ("%s: %sabled cmd640 fast host timing (devsel)\n",
+ drive->name, mode_wanted ? "en" : "dis");
+ return;
+
+ case 8: /* set prefetch off */
+ case 9: /* set prefetch on */
+ mode_wanted &= 1;
+ set_prefetch_mode (drive, mode_wanted);
+ printk ("%s: %sabled cmd640 prefetch\n", drive->name,
+ mode_wanted ? "en" : "dis");
+ return;
+ }
+
+ mode_wanted = ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
+ pio_mode = d.pio_mode;
+ cycle_time = d.cycle_time;
if (pio_mode > 5)
pio_mode = 5;
- setup_time = ide_pio_timings[pio_mode].setup_time;
+ setup_time = ide_pio_timings[pio_mode].setup_time;
active_time = ide_pio_timings[pio_mode].active_time;
recovery_time = cycle_time - (setup_time + active_time);
clock_time = 1000 / bus_speed;
@@ -598,158 +645,78 @@
active_count = (active_time + clock_time - 1) / clock_time;
if (active_count < 2)
- active_count = 2; /* minimum allowed by cmd640 */
+ active_count = 2; /* minimum allowed by cmd640 */
recovery_count = (recovery_time + clock_time - 1) / clock_time;
recovery_count2 = cycle_count - (setup_count + active_count);
if (recovery_count2 > recovery_count)
recovery_count = recovery_count2;
if (recovery_count < 2)
- recovery_count = 2; /* minimum allowed by cmd640 */
+ recovery_count = 2; /* minimum allowed by cmd640 */
if (recovery_count > 17) {
active_count += recovery_count - 17;
recovery_count = 17;
}
if (active_count > 16)
- active_count = 16; /* maximum allowed by cmd640 */
+ active_count = 16; /* maximum allowed by cmd640 */
if (cmd640_chip_version > 1)
- recovery_count -= 1; /* cmd640b uses (count + 1)*/
+ recovery_count -= 1; /* cmd640b uses (count + 1) */
if (recovery_count > 16)
- recovery_count = 16; /* maximum allowed by cmd640 */
-
- setup_counts[index] = setup_count;
- active_counts[index] = active_count;
- recovery_counts[index] = recovery_count;
+ recovery_count = 16; /* maximum allowed by cmd640 */
/*
* In a perfect world, we might set the drive pio mode here
* (using WIN_SETFEATURE) before continuing.
*
* But we do not, because:
- * 1) this is the wrong place to do it (proper is do_special() in
ide.c)
- * 2) in practice this is rarely, if ever, necessary
+ * 1) this is the wrong place to do it (proper is do_special()
in ide.c)
+ * 2) in practice this is rarely, if ever, necessary
*/
- program_drive_counts (index);
-}
-
-/*
- * Drive PIO mode selection:
- */
-static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
-{
- u8 b;
- ide_pio_data_t d;
- unsigned int index = 0;
-
- while (drive != cmd_drives[index]) {
- if (++index > 3) {
- printk("%s: bad news in cmd640_tune_drive\n", drive->name);
- return;
- }
- }
- switch (mode_wanted) {
- case 6: /* set fast-devsel off */
- case 7: /* set fast-devsel on */
- mode_wanted &= 1;
- b = get_cmd640_reg(CNTRL) & ~0x27;
- if (mode_wanted)
- b |= 0x27;
- put_cmd640_reg(CNTRL, b);
- printk("%s: %sabled cmd640 fast host timing (devsel)\n",
drive->name, mode_wanted ? "en" : "dis");
- return;
-
- case 8: /* set prefetch off */
- case 9: /* set prefetch on */
- mode_wanted &= 1;
- set_prefetch_mode(index, mode_wanted);
- printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ?
"en" : "dis");
- return;
- }
-
- (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
- cmd640_set_mode (index, d.pio_mode, d.cycle_time);
+ program_drive_counts (drive, setup_count, active_count,
recovery_count);
- printk ("%s: selected cmd640 PIO mode%d (%dns)%s",
- drive->name,
- d.pio_mode,
- d.cycle_time,
- d.overridden ? " (overriding vendor mode)" : "");
- display_clocks(index);
- return;
+ printk ("%s: selected cmd640 PIO mode%d : %d (%dns)%s, "
+ "clocks=%d/%d/%d\n",
+ drive->name, pio_mode, mode_wanted, cycle_time,
+ d.overridden ? " (overriding vendor mode)" : "",
+ setup_count, active_count, recovery_count);
}
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-static int pci_conf1(void)
+static void __init
+init_hwif_cmd640 (ide_hwif_t * hwif)
{
- u32 tmp;
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- outb(0x01, 0xCFB);
- tmp = inl(0xCF8);
- outl(0x80000000, 0xCF8);
- if (inl(0xCF8) == 0x80000000) {
- outl(tmp, 0xCF8);
- spin_unlock_irqrestore(&ide_lock, flags);
- return 1;
- }
- outl(tmp, 0xCF8);
- spin_unlock_irqrestore(&ide_lock, flags);
- return 0;
-}
-
-static int pci_conf2(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- outb(0x00, 0xCFB);
- outb(0x00, 0xCF8);
- outb(0x00, 0xCFA);
- if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return 1;
- }
- spin_unlock_irqrestore(&ide_lock, flags);
- return 0;
-}
-
-/*
- * Probe for a cmd640 chipset, and initialize it if found. Called
from ide.c
- */
-static void __init ide_probe_for_cmd640x (void)
-{
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
int second_port_toggled = 0;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
int second_port_cmd640 = 0;
const char *bus_type, *port2;
- unsigned int index;
u8 b, cfr;
+ int i;
+
+ hwif->tuneproc = &cmd640_tuneproc;
- if (cmd640_vlb && probe_for_cmd640_vlb()) {
+ if (cmd640_vlb && probe_for_cmd640_vlb ()) {
bus_type = "VLB";
} else {
cmd640_vlb = 0;
/* Find out what kind of PCI probing is supported otherwise
we break some Adaptec cards... */
- if (pci_conf1() && probe_for_cmd640_pci1())
+
+ if (probe_for_cmd640_pci1 ())
bus_type = "PCI (type1)";
- else if (pci_conf2() && probe_for_cmd640_pci2())
+ else if (probe_for_cmd640_pci2 ())
bus_type = "PCI (type2)";
else
return;
}
+
/*
* Undocumented magic (there is no 0x5b reg in specs)
*/
- put_cmd640_reg(0x5b, 0xbd);
- if (get_cmd640_reg(0x5b) != 0xbd) {
- printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg
0x5b\n");
+ put_cmd640_reg (0x5b, 0xbd);
+ if (get_cmd640_reg (0x5b) != 0xbd) {
+ printk (KERN_ERR
+ "ide: cmd640 init failed: wrong value in reg 0x5b\n");
return;
}
- put_cmd640_reg(0x5b, 0);
+ put_cmd640_reg (0x5b, 0);
#ifdef CMD640_DUMP_REGS
CMD640_DUMP_REGS;
@@ -758,23 +725,18 @@
/*
* Documented magic begins here
*/
- cfr = get_cmd640_reg(CFR);
+ cfr = get_cmd640_reg (CFR);
cmd640_chip_version = cfr & CFR_DEVREV;
if (cmd640_chip_version == 0) {
printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
return;
}
- /*
- * Initialize data for primary port
- */
- setup_device_ptrs ();
- printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n",
- cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type,
cfr);
- cmd_hwif0->chipset = ide_cmd640;
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- cmd_hwif0->tuneproc = &cmd640_tune_drive;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+ printk ("%s: buggy cmd640%c interface on %s, config=0x%02x\n",
+ hwif->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
+
+ hwif->serialized = 1;
+ hwif->chipset = ide_cmd640;
/*
* Ensure compatibility by always using the slowest timings
@@ -783,121 +745,138 @@
*
* Maybe we need a way to NOT do these on *some* systems?
*/
- put_cmd640_reg(CMDTIM, 0);
- put_cmd640_reg(BRST, 0x40);
+ put_cmd640_reg (CMDTIM, 0);
+ put_cmd640_reg (BRST, 0x40);
/*
* Try to enable the secondary interface, if not already enabled
*/
- if (cmd_hwif1->noprobe) {
- port2 = "not probed";
- } else {
- b = get_cmd640_reg(CNTRL);
- if (secondary_port_responding()) {
- if ((b & CNTRL_ENA_2ND)) {
- second_port_cmd640 = 1;
- port2 = "okay";
- } else if (cmd640_vlb) {
- second_port_cmd640 = 1;
- port2 = "alive";
- } else
- port2 = "not cmd640";
+ if (hwif->channel == 1) //secondary interface
+ {
+ if (hwif->noprobe) {
+ port2 = "not probed";
} else {
- put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
- if (secondary_port_responding()) {
- second_port_cmd640 = 1;
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- second_port_toggled = 1;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
- port2 = "enabled";
+ b = get_cmd640_reg (CNTRL);
+ if (secondary_port_responding ()) {
+ if ((b & CNTRL_ENA_2ND)) {
+ second_port_cmd640 = 1;
+ port2 = "okay";
+ } else if (cmd640_vlb) {
+ second_port_cmd640 = 1;
+ port2 = "alive";
+ } else
+ port2 = "not cmd640";
} else {
- put_cmd640_reg(CNTRL, b); /* restore original setting */
- port2 = "not responding";
+ put_cmd640_reg (CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
+ if (secondary_port_responding ()) {
+ second_port_cmd640 = 1;
+ second_port_toggled = 1;
+ port2 = "enabled";
+ } else {
+ put_cmd640_reg (CNTRL, b); /* restore original setting */
+ port2 = "not responding";
+ }
}
}
- }
- /*
- * Initialize data for secondary cmd640 port, if enabled
- */
- if (second_port_cmd640) {
- cmd_hwif0->serialized = 1;
- cmd_hwif1->serialized = 1;
- cmd_hwif1->chipset = ide_cmd640;
- cmd_hwif0->mate = cmd_hwif1;
- cmd_hwif1->mate = cmd_hwif0;
- cmd_hwif1->channel = 1;
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- cmd_hwif1->tuneproc = &cmd640_tune_drive;
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
+ /*
+ * Initialize data for secondary cmd640 port, if enabled
+ */
+ printk (KERN_INFO "%s: %sserialized, secondary interface %s\n",
+ hwif->name, hwif->serialized ? "" : "not ", port2);
}
- printk(KERN_INFO "%s: %sserialized, secondary interface %s\n",
cmd_hwif1->name,
- cmd_hwif0->serialized ? "" : "not ", port2);
/*
* Establish initial timings/prefetch for all drives.
* Do not unnecessarily disturb any prior BIOS setup of these.
*/
- for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) {
- ide_drive_t *drive = cmd_drives[index];
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- if (drive->autotune || ((index > 1) && second_port_toggled)) {
- /*
- * Reset timing to the slowest speed and turn off prefetch.
+ for (i = 0; i < 2; i++) {
+ if (hwif->drives[i].autotune) {
+ /*
+ * Reset timing to the slowest speed and turn off prefetch.
* This way, the drive identify code has a better chance.
*/
- setup_counts [index] = 4; /* max possible */
- active_counts [index] = 16; /* max possible */
- recovery_counts [index] = 16; /* max possible */
- program_drive_counts (index);
- set_prefetch_mode (index, 0);
- printk("cmd640: drive%d timings/prefetch cleared\n", index);
+ setup_counts[2 * hwif->channel + i] = 4; /* max possible */
+ active_counts[2 * hwif->channel + i] = 16; /* max possible */
+ recovery_counts[2 * hwif->channel + i] = 16; /* max possible */
+ program_drive_counts (&(hwif->drives[i]), 4, 16, 16);
+ set_prefetch_mode ((&hwif->drives[i]), 0);
+ printk ("cmd640: drive%d timings/prefetch cleared\n",
+ 2 * hwif->channel + i);
} else {
/*
* Record timings/prefetch without changing them.
* This preserves any prior BIOS setup.
*/
- retrieve_drive_counts (index);
- check_prefetch (index);
- printk("cmd640: drive%d timings/prefetch(%s) preserved",
- index, drive->no_io_32bit ? "off" : "on");
- display_clocks(index);
+ retrieve_drive_counts (&hwif->drives[i]);
+ check_prefetch (&hwif->drives[i]);
+ printk
+ ("cmd640: drive%d timings/prefetch(%s) preserved",
+ 2 * hwif->channel + i,
+ hwif->drives[i].no_io_32bit ? "off" : "on");
+ display_clocks (&hwif->drives[i]);
}
-#else
- /*
- * Set the drive unmask flags to match the prefetch setting
- */
- check_prefetch (index);
- printk("cmd640: drive%d timings/prefetch(%s) preserved\n",
- index, drive->no_io_32bit ? "off" : "on");
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
}
#ifdef CMD640_DUMP_REGS
CMD640_DUMP_REGS;
#endif
- return;
-}
-
-static int __init cmd640_init(void)
-{
- ide_register_driver(ide_probe_for_cmd640x);
- return 0;
}
/*
* Called by the IDE core when compiled in and cmd640=vlb is
* selected.
*/
-void init_cmd640_vlb(void)
+void __init
+init_cmd640_vlb (void)
{
cmd640_vlb = 1;
}
-module_init(cmd640_init);
+extern void ide_setup_pci_device (struct pci_dev *, ide_pci_device_t
*);
+
+static int __devinit
+cmd640_init_one (struct pci_dev *dev, const struct pci_device_id *id)
+{
+ ide_pci_device_t *d = &cmd640_chipsets[id->driver_data];
+ if (dev->device != d->device)
+ BUG ();
+ ide_setup_pci_device (dev, d);
+ MOD_INC_USE_COUNT;
+ return 0;
+}
+
+static struct pci_device_id cmd640_pci_tbl[] __devinitdata = {
+ {PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_640, PCI_ANY_ID, PCI_ANY_ID, 0,
0,
+ 0},
+ {0,},
+};
+
+static struct pci_driver driver = {
+ .name = "CMD640 IDE",
+ .id_table = cmd640_pci_tbl,
+ .probe = cmd640_init_one,
+};
+
+static int __init
+cmd640_ide_init (void)
+{
+ return ide_pci_register_driver (&driver);
+}
+
+static void __exit
+cmd640_ide_exit (void)
+{
+ ide_pci_unregister_driver (&driver);
+}
+
+module_init (cmd640_ide_init);
+module_exit (cmd640_ide_exit);
+
+MODULE_AUTHOR ("Igor Abramov, Mark Lord, Stefan Talpalaru");
+MODULE_DESCRIPTION ("IDE support for CMD640 controller");
+MODULE_PARM (cmd640_vlb, "i");
+MODULE_PARM_DESC (cmd640_vlb, "Set to enable scanning for VLB
controllers");
+MODULE_LICENSE ("GPL");
-MODULE_AUTHOR("See Source");
-MODULE_DESCRIPTION("IDE support for CMD640 controller");
-MODULE_PARM(cmd640_vlb, "i");
-MODULE_PARM_DESC(cmd640_vlb, "Set to enable scanning for VLB
controllers");
-MODULE_LICENSE("GPL");
+EXPORT_NO_SYMBOLS;
diff -urN linux-2.4.22/drivers/ide/pci/cmd640.h
linux-2.4.22-new/drivers/ide/pci/cmd640.h
--- linux-2.4.22/drivers/ide/pci/cmd640.h 2003-09-10 17:18:22.000000000
+0000
+++ linux-2.4.22-new/drivers/ide/pci/cmd640.h 2003-10-26
17:07:10.000000000 +0000
@@ -5,28 +5,28 @@
#include <linux/pci.h>
#include <linux/ide.h>
-#define IDE_IGNORE ((void *)-1)
+static void init_hwif_cmd640 (ide_hwif_t *);
-static ide_pci_device_t cmd640_chipsets[] __initdata = {
+static ide_pci_device_t cmd640_chipsets[] __devinitdata = {
{
- .vendor = PCI_VENDOR_ID_CMD,
- .device = PCI_DEVICE_ID_CMD_640,
- .name = "CMD640",
- .init_setup = NULL,
- .init_chipset = NULL,
- .init_iops = NULL,
- .init_hwif = IDE_IGNORE,
- .init_dma = NULL,
- .channels = 2,
- .autodma = NODMA,
- .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
- .bootable = ON_BOARD,
- .extra = 0
- },{
- .vendor = 0,
- .device = 0,
- .bootable = EOL,
- }
-}
+ .vendor = PCI_VENDOR_ID_CMD,
+ .device = PCI_DEVICE_ID_CMD_640,
+ .name = "CMD640",
+ .init_setup = NULL,
+ .init_chipset = NULL,
+ .init_iops = NULL,
+ .init_hwif = init_hwif_cmd640,
+ .init_dma = NULL,
+ .channels = 2,
+ .autodma = NODMA,
+ .enablebits = {{0x00, 0x00, 0x00}, {0x00, 0x00, 0x00}},
+ .bootable = ON_BOARD,
+ .extra = 0}, {
+ .vendor = 0,
+ .device = 0,
+ .channels = 0,
+ .bootable = EOL,
+ }
+};
-#endif /* CMD640_H */
+#endif /* CMD640_H */
=====
Stefan Talpalaru
__________________________________
Do you Yahoo!?
Exclusive Video Premiere - Britney Spears
http://launch.yahoo.com/promos/britneyspears/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Andi Kleen: "Re: [2.6.0-test8/9] ethertap oops"
- Next in thread: Bartlomiej Zolnierkiewicz: "Re: CMD640 ide driver made to work"
- Reply: Bartlomiej Zolnierkiewicz: "Re: CMD640 ide driver made to work"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
