Re: Transmit timeout with 3c395, 2.4.19, 2.4.22

From: Stian Jordet (liste_at_jordet.nu)
Date: 10/30/03

  • Next message: Jeff Garzik: "[PATCH #2] Re: SATA and 2.6.0-test9" 
    To: linux-kernel@vger.kernel.org
Date:	Thu, 30 Oct 2003 18:50:22 +0100

    man, 27.10.2003 kl. 20.18 skrev Andrew Morton:
    > Norbert Preining <preining@logic.at> wrote:
    > >
    > > Hi Andrew, hi list!
    > >
    > > Suddenly, after 160 days of running, our bridged firewall started to
    > > spit out this:
    > > NETDEV WATCHDOG: eth1: transmit timed out

    My gateway started to give me this errors on eth0 some days ago. Eth0 is
    the internal network-card, which is connected to just one pc through a
    crossed tp-cable. When I run a certain app on my pc (xMule), the gateway
    alway starts spitting those messages.

    Could have been hardware, but only happens when xmule is active on my
    computer. Wasn't like this earlier.

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Jeff Garzik: "[PATCH #2] Re: SATA and 2.6.0-test9"

    Relevant Pages

    • Re: ndiswrapper & SuSe 9.1 in Latitude D600
      ... >> another machine in my network if I give the ip address. ... > 2.Made sure to input the router as gateway. ... disable the wireless interface and just use the eth0 (eth0 is always ... Someone mentioned that if a dhcpcd process is already running the ...
      (alt.os.linux.suse)
    • Re: [SLE] WIRELESS CARD SET UP
      ... How and where can I set both network adapters to ... This module is known to YAST as well. ... It sounds like you do not have a gateway. ...
      (SuSE)
    • Re: Two network cards howto
      ... On eth0 there's the adsl router. ... I'd like to use eth1 for internal files transfert, ... Remove the line of the Gateway entry on eth1 file and you will not ... Internet connections and want to use them both it's another story and ...
      (comp.os.linux.networking)
    • Re: Can I bridge without a bridge?
      ... > 8 port ethernet switch ... Your mistake with proxy_arp was probably the netmask for eth0 interface ... same as IP, host route to the gateway on eth0, and default route to that ... 111.222.111.152/32, host route to ISP gw, default to gw ...
      (comp.os.linux.networking)
    • Re: Two network adapters on seperate networks problem
      ... If you can contact them directly without a gateway, ... I think each system is connected to a local switch with several other ... Is there a way to tell eth0 to use the gateway 10.9.81.193 for all ... I didn't see a way to really do that with the route ...
      (comp.os.linux.networking)