Alpha: ALi 15x3 DMA completely broken now

From: Jason Papadopoulos (jasonp_at_boo.net)
Date: 11/06/03

  • Next message: viro_at_parcelfarce.linux.theplanet.co.uk: "Re: Alpha: ALi 15x3 DMA completely broken now" 
    Date:	Thu, 06 Nov 2003 01:34:35 -0500
To: linux-kernel@vger.kernel.org

    Hello. 2.4.21-rc could not start DMA at boot time on
    my system, but hdparm could turn it on afterwards. Now
    with 2.4.22, nothing will turn on DMA; using hdparm
    locks the machine immediately.

    The machine in question is an DS10 Alphaserver, Ali
    M5229 rev c0 IDE controller. Has 2.4.23-pre made any
    fixes for this device?

    Thanks in advance,
    jasonp

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: viro_at_parcelfarce.linux.theplanet.co.uk: "Re: Alpha: ALi 15x3 DMA completely broken now"

    Relevant Pages

    • (no subject)
      ... You can't expect users to play with hdparm and it's quite ... turn your DMA off on the CD. ... send the line "unsubscribe linux-kernel" in ... Please read the FAQ at http://www.tux.org/lkml/ ...
      (Linux-Kernel)
    • Re: Kernel Patch for ATI 9100 RS300
      ... I got the graphics card workin but my problem is that I cannot set the DMA. ... hdparm -d1 /dev/hda0 always gives me an error sayint this operation is ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: Problem in 2.6.0-test9-mm1 with siimage+hdparm
      ... Since siimage 1.06 drvier. ... I have DMA without using ... > hdparm, but it is not as fast as in windows. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: Problem with ide=nodma
      ... enable dma with hdparm :-( ... and to turn dma off with hdparm until I'm ready to do extended dma ... das eine Mal als Tragödie, ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Problems with DMA on IDE/ServerWorks/Seagate.
      ... We've disabled DMA on several machines, ... I've played with using the hdparm -p ... Cycle time: no flow control=240ns IORDY flow control=120ns ... Host Protected Area feature set ...
      (Linux-Kernel)