RE: New model of SanDisk compact flash not working

From: gmlinux (gmlinux_at_x-plor.com)
Date: 11/24/03

  • Next message: Karl Pitrich: "LSI53C1030 (Fustion MPT) performance"
    Date:	Mon, 24 Nov 2003 12:08:55 +0200
    To: <linux-kernel@vger.kernel.org>
    
    

    Michael,

    The original SanDisk I checked passed 100%, it has been running in the
    field now for about 6 months without any hassles. It is just this new
    model that they have released.
    The major problem is I have a release in about 2 weeks, which means I do
    not have time to do testing on a new product, and we cannot get any of
    the older versions.

    hdc=flash is used to make the kernel scan for a slave when it detects a
    flash disk. We are already using this option because we have two
    SanDisks on the same bus, master and slave.

    I thought IDE was a standard that a single driver would work with all
    devices? I cannot understand how a new controller (if it really does
    conform to the standards), cannot work.
    It is working a little, because it responds to all the ATA interface
    commands and returns readable information if you for example query the
    status. Also, the kernel does detect the SANDISK CFB info string
    correctly on boot.

    Regards
      Garth

    -----Original Message-----
    From: Michael C. B. Ashley [mailto:mcba@phys.unsw.edu.au]
    Sent: Monday, November 24, 2003 11:50 AM
    To: gmlinux
    Subject: re: New model of SanDisk compact flash not working

    Hi Garth,

    I have had lots of trouble with SanDisk CF disks. So much so that I have
    given up on them and am using an alternative IDE solid state drive
    (M-Systems IDE Plus - seems to work, I'm getting 8MB/sec from hdparm
    -tT).

    Have you tried "hdc=flash"?

    If you search for "flash" in the IDE code you will find cryptic comments
    about flash drives not properly implementing standards.

    Good luck!
    Michael
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/


  • Next message: Karl Pitrich: "LSI53C1030 (Fustion MPT) performance"

    Relevant Pages

    • Re: SMI Lynx display driver?
      ... > SanDisk connected to IDE, ... >> Non of the PB display driver will work. ... Have you tried it on the SMI web side? ...
      (microsoft.public.windowsce.platbuilder)
    • Re: SanDisk CF strange problem
      ... Kingston to a 256Mb SanDisk. ... (to get it to work with the SanDisk IG 265Mb flash chip). ... > worked fine until we tried 64MB San-Disk Compact Flash. ...
      (microsoft.public.windowsce.platbuilder)
    • Re: FLASH market collapses
      ... and losses for Sandisk for example, and them reducing investment in new ... factories to prevent further over production. ... So if you need FLASH then you should be able to negotiate a good price. ... I haven't seen hard drives getting any more expensive! ...
      (sci.electronics.design)