aic7xxx problem on sparc64 (2.6)

From: Vladimir Klenov (maple_at_center.hqhost.net)
Date: 11/29/03

  • Next message: Wes Janzen: "Re: Promise IDE controller crashes 2.4.22"
    Date:	Sat, 29 Nov 2003 10:40:18 +0200
    To: linux-kernel@vger.kernel.org
    
    

    >I inserted my known working 2940 (7880) into a Sun Ultra 5 (32-bit PCI).
    >modprobe aic7xxx gave some errors and asked to report the bug.
    >modprobe sd_mod gave a lot more errors and put the disk offline. The
    >same hardware (host, HBA and disk) works fine with latest 2.4 kernel
    >(2.4.23-rc5 currently). The problem is with 2.6.0-test11.

    similar problem with -test11 and aic79xx on x86
    2.4 works ok, test11 give unrecoverable read errors, but with drivers from
    http://people.FreeBSD.org/~gibbs/linux/SRC/ -test11 working fine.

    do I have chance to include working drivers to official tree? ;)

    I use software raid1 over two scsi drives.

    lspci:
    02:06.0 SCSI storage controller: Adaptec ASC-29320LP U320 (rev 03)

    dmesg:
    scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 2.0.4
            <Adaptec 29320LP Ultra320 SCSI adapter>
            aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz,
    512 SCBs

    (scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
    (scsi0:A:1): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
      Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E
      Type: Direct-Access ANSI SCSI revision: 03
      Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E
      Type: Direct-Access ANSI SCSI revision: 03
    SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
    SCSI device sda: drive cache: write back

            SY, Vladimir
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/


  • Next message: Wes Janzen: "Re: Promise IDE controller crashes 2.4.22"