Re: Fixes for nforce2 hard lockup, apic, io-apic, udma133 covered

From: Ian Kumlien (pomac_at_vapor.com)
Date: 12/07/03

  • Next message: Lee: "PROBLEM: [Bug Report]: 2.6.0-test10:Can't use mkintrd to make a image file under" 
    To: linux-kernel@vger.kernel.org
Date:	Sun, 07 Dec 2003 20:58:47 +0100

    > I have monitored list and know my nforce2 experiences have been
    > common.

    Hell yeah =)

    > When I enabled either apic or io-apic in kern config, lockups came
    > hard and fast. Particularly bad under hard disk load. Heaps of lost
    > ints on irq7 in apic and ioapic mode. Lockups disappeared when I
    > lowered the ide hda udma speed to mode 3 with hdparm so I went looking
    > for answers which now follow.

    Good job =)

    > There are three parts to this email.
    > a) apic mods.
    > Lockups are due to too fast an apic acknowledge of apic timer int.
    > Apic hard locked up the system - no nmi debug available.
    > Fixed it by introducing a delay of at least 500ns into
    > smp_apic_timer_interrupt() just prior to ack_APIC_irq().

    I find this really odd... It works just fine...
    As did disabling whats now active ie:
    'Halt Disconnect and Stop Grant Disconnect' bit is enabled.

    So it seems like these are the two most important factors, at least from
    where i stand. Both enabled me to actually use my machine with IO-APIC.
    (1, disabling Halt Disconnect and Stop Grand Disconnect bit or 2, Add a
    delay on the irq ack.)
    Anyone that has any clues?

    > b) io-apic mods
    > So I have fixed it too (tested on both my epox and albatron MOBOs).
    > Firstly I found 8254 connected directly to pin 0 not pin 2 of io-apic.
    > I have modified check_timer() in io_apic.c to trial connect pin and
    > test for it after the existing test for connection to io-apic.

    Good job, i wonder if it could be more generalized and integrated with
    the rest of the code (i haven't even checked the rest of the code, but
    this seemed separated).

    One thing though, I get a lot more NMI's now than with nmi_watchdog=2...
    NMI: 85520
    LOC: 85477

    I usually had a 3 figure number by now... but.. =)

    > c) ide driver mods

    Cool..

    I applied all patches and it survived my grep test so i think it works. 

    -- 
Ian Kumlien <pomac () vapor ! com> -- http://pomac.netswarm.net

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Lee: "PROBLEM: [Bug Report]: 2.6.0-test10:Can't use mkintrd to make a image file under"