Re: Oops with 2.6.1-rc2-mm1
From: Daniel Drake (dan_at_reactivated.net)
Date: 01/08/04
- Previous message: Cress, Andrew R: "RE: stability problems with 2.4.24/Software RAID/ext3"
- In reply to: Norberto Bensa: "Oops with 2.6.1-rc2-mm1"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Thu, 08 Jan 2004 16:17:59 +0000 To: Norberto Bensa <nbensa@gmx.net>
Similar problems here. Incase it helps any further, dmesg and ksymoops output
attached.
I checked with metalog, and the oops's occured right as I came back to my PC
after a couple of hours of inactivity - when it was unblanking the screen (I
was on a vt at the time).
Daniel
Norberto Bensa wrote:
> All right, this is one of my two or three "BSOD" since I use Linux :-)
> Not sure if I did ksymoops right. I hope this is useful
>
>
------------[ cut here ]------------
kernel BUG at mm/rmap.c:305!
invalid operand: 0000 [#1]
PREEMPT
CPU: 0
EIP: 0060:[<c014d4a4>] Tainted: PF VLI
EFLAGS: 00010246
EIP is at try_to_unmap_one+0x1c4/0x1e0
eax: 00000000 ebx: 00000000 ecx: de030000 edx: c1000000
esi: c149a570 edi: c149a570 ebp: de030000 esp: dfdb5d48
ds: 007b es: 007b ss: 0068
Process kswapd0 (pid: 7, threadinfo=dfdb4000 task=dfdb9340)
Stack: c0139afa c0327404 00000001 c149a570 00000000 00000000 c149a570 ffffffff
dfdb4000 c014d5f6 c0327400 00000001 00000000 00000001 00000000 c149a570
00000001 dfdb4000 c0144b48 c149a570 000000d0 dff7df70 c011ebfc 00000005
Call Trace:
[<c0139afa>] add_to_page_cache+0x6a/0xf0
[<c014d5f6>] try_to_unmap+0x136/0x160
[<c0144b48>] shrink_list+0x238/0x580
[<c011ebfc>] schedule+0x34c/0x5b0
[<c014503a>] shrink_cache+0x1aa/0x360
[<c01457c1>] shrink_zone+0x81/0xb0
[<c0145b94>] balance_pgdat+0x174/0x200
[<c0145d37>] kswapd+0x117/0x130
[<c01206a0>] autoremove_wake_function+0x0/0x50
[<c02db666>] ret_from_fork+0x6/0x14
[<c01206a0>] autoremove_wake_function+0x0/0x50
[<c0145c20>] kswapd+0x0/0x130
[<c010b289>] kernel_thread_helper+0x5/0xc
Code: e8 1b c1 e3 08 01 c0 09 d8 89 45 00 31 c0 85 c0 0f 84 3c ff ff ff 0f 0b 57 01 40 e6 2e c0 e9 2f ff ff ff 0f 01 3b e9 c5 fe ff ff <0f> 0b 31 01 40 e6 2e c0 e9 6c fe ff ff eb 0d 90 90 90 90 90 90
Badness in unblank_screen at drivers/char/vt.c:2793
Call Trace:
[<c010dac0>] do_invalid_op+0x0/0xd0
[<c0229e56>] unblank_screen+0x126/0x130
[<c011ca2c>] bust_spinlocks+0x2c/0x60
[<c010d775>] die+0x95/0x100
[<c010db89>] do_invalid_op+0xc9/0xd0
[<c014d4a4>] try_to_unmap_one+0x1c4/0x1e0
[<c011dd5e>] recalc_task_prio+0x8e/0x1b0
[<c011df27>] try_to_wake_up+0xa7/0x160
[<c011ef01>] __wake_up_common+0x31/0x60
[<c02dc18f>] error_code+0x2f/0x38
[<c014d4a4>] try_to_unmap_one+0x1c4/0x1e0
[<c0139afa>] add_to_page_cache+0x6a/0xf0
[<c014d5f6>] try_to_unmap+0x136/0x160
[<c0144b48>] shrink_list+0x238/0x580
[<c011ebfc>] schedule+0x34c/0x5b0
[<c014503a>] shrink_cache+0x1aa/0x360
[<c01457c1>] shrink_zone+0x81/0xb0
[<c0145b94>] balance_pgdat+0x174/0x200
[<c0145d37>] kswapd+0x117/0x130
[<c01206a0>] autoremove_wake_function+0x0/0x50
[<c02db666>] ret_from_fork+0x6/0x14
[<c01206a0>] autoremove_wake_function+0x0/0x50
[<c0145c20>] kswapd+0x0/0x130
[<c010b289>] kernel_thread_helper+0x5/0xc
<6>note: kswapd0[7] exited with preempt_count 1
Unable to handle kernel paging request at virtual address 1877d029
printing eip:
c0168c30
*pde = 00000000
Oops: 0000 [#2]
PREEMPT
CPU: 0
EIP: 0060:[<c0168c30>] Tainted: PF VLI
EFLAGS: 00010202
EIP is at poll_freewait+0x10/0x50
eax: 00000000 ebx: d86ef008 ecx: c13d1558 edx: c13e0ab0
esi: d86ef008 edi: 1877d025 ebp: 00000005 esp: dcbfbee0
ds: 007b es: 007b ss: 0068
Process xmms (pid: 9507, threadinfo=dcbfa000 task=df535980)
Stack: 00000000 00000000 00000005 c0168fd7 dcbfbf40 00000000 00000000 00000000
00000000 00000304 00000010 00000000 00000000 00000010 dcbfa000 db19ca8c
db19ca88 db19ca84 db19ca98 db19ca94 db19ca90 00000000 00000000 00000000
Call Trace:
[<c0168fd7>] do_select+0x1b7/0x2d0
[<c0168c70>] __pollwait+0x0/0xd0
[<c01693ef>] sys_select+0x2cf/0x4f0
[<c0157839>] __fput+0x79/0xc0
[<c0155f11>] sys_close+0x61/0xa0
[<c02db783>] syscall_call+0x7/0xb
Code: 00 70 8c 16 c0 c7 40 08 00 00 00 00 c7 40 04 00 00 00 00 c3 8d b4 26 00 00 00 00 57 56 53 8b 44 24 10 8b 78 04 85 ff 74 30 89 f6 <8b> 5f 04 8d 77 08 83 eb 1c 8b 43 18 8d 53 04 e8 4c 78 fb ff 8b
Badness in unblank_screen at drivers/char/vt.c:2793
Call Trace:
[<c0229e56>] unblank_screen+0x126/0x130
[<c011ca2c>] bust_spinlocks+0x2c/0x60
[<c010d775>] die+0x95/0x100
[<c011ce9e>] do_page_fault+0x1de/0x50c
[<c011dd5e>] recalc_task_prio+0x8e/0x1b0
[<c011ebfc>] schedule+0x34c/0x5b0
[<c011ccc0>] do_page_fault+0x0/0x50c
[<c02dc18f>] error_code+0x2f/0x38
[<c0168c30>] poll_freewait+0x10/0x50
[<c0168fd7>] do_select+0x1b7/0x2d0
[<c0168c70>] __pollwait+0x0/0xd0
[<c01693ef>] sys_select+0x2cf/0x4f0
[<c0157839>] __fput+0x79/0xc0
[<c0155f11>] sys_close+0x61/0xa0
[<c02db783>] syscall_call+0x7/0xb
ksymoops 2.4.9 on i686 2.6.1-rc2-mm1. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.1-rc2-mm1/ (default)
-m /usr/src/linux/System.map (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Machine check exception polling timer started.
WARNING: USB Mass Storage data integrity not assured
WARNING: USB Mass Storage data integrity not assured
WARNING: USB Mass Storage data integrity not assured
WARNING: USB Mass Storage data integrity not assured
kernel BUG at mm/rmap.c:305!
invalid operand: 0000 [#1]
CPU: 0
EIP: 0060:[<c014d4a4>] Tainted: PF VLI
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000 ebx: 00000000 ecx: de030000 edx: c1000000
esi: c149a570 edi: c149a570 ebp: de030000 esp: dfdb5d48
ds: 007b es: 007b ss: 0068
Stack: c0139afa c0327404 00000001 c149a570 00000000 00000000 c149a570 ffffffff
dfdb4000 c014d5f6 c0327400 00000001 00000000 00000001 00000000 c149a570
00000001 dfdb4000 c0144b48 c149a570 000000d0 dff7df70 c011ebfc 00000005
Call Trace:
[<c0139afa>] add_to_page_cache+0x6a/0xf0
[<c014d5f6>] try_to_unmap+0x136/0x160
[<c0144b48>] shrink_list+0x238/0x580
[<c011ebfc>] schedule+0x34c/0x5b0
[<c014503a>] shrink_cache+0x1aa/0x360
[<c01457c1>] shrink_zone+0x81/0xb0
[<c0145b94>] balance_pgdat+0x174/0x200
[<c0145d37>] kswapd+0x117/0x130
[<c01206a0>] autoremove_wake_function+0x0/0x50
[<c02db666>] ret_from_fork+0x6/0x14
[<c01206a0>] autoremove_wake_function+0x0/0x50
[<c0145c20>] kswapd+0x0/0x130
[<c010b289>] kernel_thread_helper+0x5/0xc
Code: e8 1b c1 e3 08 01 c0 09 d8 89 45 00 31 c0 85 c0 0f 84 3c ff ff ff 0f 0b 57 01 40 e6 2e c0 e9 2f ff ff ff 0f 01 3b e9 c5 fe ff ff <0f> 0b 31 01 40 e6 2e c0 e9 6c fe ff ff eb 0d 90 90 90 90 90 90
>>EIP; c014d4a4 <try_to_unmap_one+1c4/1e0> <=====
>>ecx; de030000 <_end+1dc50ee8/3fc1dee8>
>>edx; c1000000 <_end+c20ee8/3fc1dee8>
>>esi; c149a570 <_end+10bb458/3fc1dee8>
>>edi; c149a570 <_end+10bb458/3fc1dee8>
>>ebp; de030000 <_end+1dc50ee8/3fc1dee8>
>>esp; dfdb5d48 <_end+1f9d6c30/3fc1dee8>
Trace; c0139afa <add_to_page_cache+6a/f0>
Trace; c014d5f6 <try_to_unmap+136/160>
Trace; c0144b48 <shrink_list+238/580>
Trace; c011ebfc <schedule+34c/5b0>
Trace; c014503a <shrink_cache+1aa/360>
Trace; c01457c1 <shrink_zone+81/b0>
Trace; c0145b94 <balance_pgdat+174/200>
Trace; c0145d37 <kswapd+117/130>
Trace; c01206a0 <autoremove_wake_function+0/50>
Trace; c02db666 <ret_from_fork+6/14>
Trace; c01206a0 <autoremove_wake_function+0/50>
Trace; c0145c20 <kswapd+0/130>
Trace; c010b289 <kernel_thread_helper+5/c>
This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.
Code; c014d479 <try_to_unmap_one+199/1e0>
00000000 <_EIP>:
Code; c014d479 <try_to_unmap_one+199/1e0>
0: e8 1b c1 e3 08 call 8e3c120 <_EIP+0x8e3c120>
Code; c014d47e <try_to_unmap_one+19e/1e0>
5: 01 c0 add %eax,%eax
Code; c014d480 <try_to_unmap_one+1a0/1e0>
7: 09 d8 or %ebx,%eax
Code; c014d482 <try_to_unmap_one+1a2/1e0>
9: 89 45 00 mov %eax,0x0(%ebp)
Code; c014d485 <try_to_unmap_one+1a5/1e0>
c: 31 c0 xor %eax,%eax
Code; c014d487 <try_to_unmap_one+1a7/1e0>
e: 85 c0 test %eax,%eax
Code; c014d489 <try_to_unmap_one+1a9/1e0>
10: 0f 84 3c ff ff ff je ffffff52 <_EIP+0xffffff52>
Code; c014d48f <try_to_unmap_one+1af/1e0>
16: 0f 0b ud2a
Code; c014d491 <try_to_unmap_one+1b1/1e0>
18: 57 push %edi
Code; c014d492 <try_to_unmap_one+1b2/1e0>
19: 01 40 e6 add %eax,0xffffffe6(%eax)
Code; c014d495 <try_to_unmap_one+1b5/1e0>
1c: 2e cs
Code; c014d496 <try_to_unmap_one+1b6/1e0>
1d: c0 e9 2f shr $0x2f,%cl
Code; c014d499 <try_to_unmap_one+1b9/1e0>
20: ff (bad)
Code; c014d49a <try_to_unmap_one+1ba/1e0>
21: ff (bad)
Code; c014d49b <try_to_unmap_one+1bb/1e0>
22: ff 0f decl (%edi)
Code; c014d49d <try_to_unmap_one+1bd/1e0>
24: 01 3b add %edi,(%ebx)
Code; c014d49f <try_to_unmap_one+1bf/1e0>
26: e9 c5 fe ff ff jmp fffffef0 <_EIP+0xfffffef0>
This decode from eip onwards should be reliable
Code; c014d4a4 <try_to_unmap_one+1c4/1e0>
00000000 <_EIP>:
Code; c014d4a4 <try_to_unmap_one+1c4/1e0> <=====
0: 0f 0b ud2a <=====
Code; c014d4a6 <try_to_unmap_one+1c6/1e0>
2: 31 01 xor %eax,(%ecx)
Code; c014d4a8 <try_to_unmap_one+1c8/1e0>
4: 40 inc %eax
Code; c014d4a9 <try_to_unmap_one+1c9/1e0>
5: e6 2e out %al,$0x2e
Code; c014d4ab <try_to_unmap_one+1cb/1e0>
7: c0 e9 6c shr $0x6c,%cl
Code; c014d4ae <try_to_unmap_one+1ce/1e0>
a: fe (bad)
Code; c014d4af <try_to_unmap_one+1cf/1e0>
b: ff (bad)
Code; c014d4b0 <try_to_unmap_one+1d0/1e0>
c: ff eb ljmp *%ebx
Code; c014d4b2 <try_to_unmap_one+1d2/1e0>
e: 0d 90 90 90 90 or $0x90909090,%eax
Code; c014d4b7 <try_to_unmap_one+1d7/1e0>
13: 90 nop
Code; c014d4b8 <try_to_unmap_one+1d8/1e0>
14: 90 nop
Call Trace:
[<c010dac0>] do_invalid_op+0x0/0xd0
[<c0229e56>] unblank_screen+0x126/0x130
[<c011ca2c>] bust_spinlocks+0x2c/0x60
[<c010d775>] die+0x95/0x100
[<c010db89>] do_invalid_op+0xc9/0xd0
[<c014d4a4>] try_to_unmap_one+0x1c4/0x1e0
[<c011dd5e>] recalc_task_prio+0x8e/0x1b0
[<c011df27>] try_to_wake_up+0xa7/0x160
[<c011ef01>] __wake_up_common+0x31/0x60
[<c02dc18f>] error_code+0x2f/0x38
[<c014d4a4>] try_to_unmap_one+0x1c4/0x1e0
[<c0139afa>] add_to_page_cache+0x6a/0xf0
[<c014d5f6>] try_to_unmap+0x136/0x160
[<c0144b48>] shrink_list+0x238/0x580
[<c011ebfc>] schedule+0x34c/0x5b0
[<c014503a>] shrink_cache+0x1aa/0x360
[<c01457c1>] shrink_zone+0x81/0xb0
[<c0145b94>] balance_pgdat+0x174/0x200
[<c0145d37>] kswapd+0x117/0x130
[<c01206a0>] autoremove_wake_function+0x0/0x50
[<c02db666>] ret_from_fork+0x6/0x14
[<c01206a0>] autoremove_wake_function+0x0/0x50
[<c0145c20>] kswapd+0x0/0x130
[<c010b289>] kernel_thread_helper+0x5/0xc
Unable to handle kernel paging request at virtual address 1877d029
c0168c30
*pde = 00000000
Oops: 0000 [#2]
CPU: 0
EIP: 0060:[<c0168c30>] Tainted: PF VLI
EFLAGS: 00010202
eax: 00000000 ebx: d86ef008 ecx: c13d1558 edx: c13e0ab0
esi: d86ef008 edi: 1877d025 ebp: 00000005 esp: dcbfbee0
ds: 007b es: 007b ss: 0068
Stack: 00000000 00000000 00000005 c0168fd7 dcbfbf40 00000000 00000000 00000000
00000000 00000304 00000010 00000000 00000000 00000010 dcbfa000 db19ca8c
db19ca88 db19ca84 db19ca98 db19ca94 db19ca90 00000000 00000000 00000000
Call Trace:
[<c0168fd7>] do_select+0x1b7/0x2d0
[<c0168c70>] __pollwait+0x0/0xd0
[<c01693ef>] sys_select+0x2cf/0x4f0
[<c0157839>] __fput+0x79/0xc0
[<c0155f11>] sys_close+0x61/0xa0
[<c02db783>] syscall_call+0x7/0xb
Code: 00 70 8c 16 c0 c7 40 08 00 00 00 00 c7 40 04 00 00 00 00 c3 8d b4 26 00 00 00 00 57 56 53 8b 44 24 10 8b 78 04 85 ff 74 30 89 f6 <8b> 5f 04 8d 77 08 83 eb 1c 8b 43 18 8d 53 04 e8 4c 78 fb ff 8b
Trace; c010dac0 <do_invalid_op+0/d0>
Trace; c0229e56 <unblank_screen+126/130>
Trace; c011ca2c <bust_spinlocks+2c/60>
Trace; c010d775 <die+95/100>
Trace; c010db89 <do_invalid_op+c9/d0>
Trace; c014d4a4 <try_to_unmap_one+1c4/1e0>
Trace; c011dd5e <recalc_task_prio+8e/1b0>
Trace; c011df27 <try_to_wake_up+a7/160>
Trace; c011ef01 <__wake_up_common+31/60>
Trace; c02dc18f <error_code+2f/38>
Trace; c014d4a4 <try_to_unmap_one+1c4/1e0>
Trace; c0139afa <add_to_page_cache+6a/f0>
Trace; c014d5f6 <try_to_unmap+136/160>
Trace; c0144b48 <shrink_list+238/580>
Trace; c011ebfc <schedule+34c/5b0>
Trace; c014503a <shrink_cache+1aa/360>
Trace; c01457c1 <shrink_zone+81/b0>
Trace; c0145b94 <balance_pgdat+174/200>
Trace; c0145d37 <kswapd+117/130>
Trace; c01206a0 <autoremove_wake_function+0/50>
Trace; c02db666 <ret_from_fork+6/14>
Trace; c01206a0 <autoremove_wake_function+0/50>
Trace; c0145c20 <kswapd+0/130>
Trace; c010b289 <kernel_thread_helper+5/c>
>>EIP; c0168c30 <poll_freewait+10/50> <=====
>>ebx; d86ef008 <_end+1830fef0/3fc1dee8>
>>ecx; c13d1558 <_end+ff2440/3fc1dee8>
>>edx; c13e0ab0 <_end+1001998/3fc1dee8>
>>esi; d86ef008 <_end+1830fef0/3fc1dee8>
>>esp; dcbfbee0 <_end+1c81cdc8/3fc1dee8>
Trace; c0168fd7 <do_select+1b7/2d0>
Trace; c0168c70 <__pollwait+0/d0>
Trace; c01693ef <sys_select+2cf/4f0>
Trace; c0157839 <__fput+79/c0>
Trace; c0155f11 <sys_close+61/a0>
Trace; c02db783 <syscall_call+7/b>
This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.
Code; c0168c05 <poll_initwait+5/20>
00000000 <_EIP>:
Code; c0168c05 <poll_initwait+5/20>
0: 00 70 8c add %dh,0xffffff8c(%eax)
Code; c0168c08 <poll_initwait+8/20>
3: 16 push %ss
Code; c0168c09 <poll_initwait+9/20>
4: c0 c7 40 rol $0x40,%bh
Code; c0168c0c <poll_initwait+c/20>
7: 08 00 or %al,(%eax)
Code; c0168c0e <poll_initwait+e/20>
9: 00 00 add %al,(%eax)
Code; c0168c10 <poll_initwait+10/20>
b: 00 c7 add %al,%bh
Code; c0168c12 <poll_initwait+12/20>
d: 40 inc %eax
Code; c0168c13 <poll_initwait+13/20>
e: 04 00 add $0x0,%al
Code; c0168c15 <poll_initwait+15/20>
10: 00 00 add %al,(%eax)
Code; c0168c17 <poll_initwait+17/20>
12: 00 c3 add %al,%bl
Code; c0168c19 <poll_initwait+19/20>
14: 8d b4 26 00 00 00 00 lea 0x0(%esi,1),%esi
Code; c0168c20 <poll_freewait+0/50>
1b: 57 push %edi
Code; c0168c21 <poll_freewait+1/50>
1c: 56 push %esi
Code; c0168c22 <poll_freewait+2/50>
1d: 53 push %ebx
Code; c0168c23 <poll_freewait+3/50>
1e: 8b 44 24 10 mov 0x10(%esp,1),%eax
Code; c0168c27 <poll_freewait+7/50>
22: 8b 78 04 mov 0x4(%eax),%edi
Code; c0168c2a <poll_freewait+a/50>
25: 85 ff test %edi,%edi
Code; c0168c2c <poll_freewait+c/50>
27: 74 30 je 59 <_EIP+0x59>
Code; c0168c2e <poll_freewait+e/50>
29: 89 f6 mov %esi,%esi
This decode from eip onwards should be reliable
Code; c0168c30 <poll_freewait+10/50>
00000000 <_EIP>:
Code; c0168c30 <poll_freewait+10/50> <=====
0: 8b 5f 04 mov 0x4(%edi),%ebx <=====
Code; c0168c33 <poll_freewait+13/50>
3: 8d 77 08 lea 0x8(%edi),%esi
Code; c0168c36 <poll_freewait+16/50>
6: 83 eb 1c sub $0x1c,%ebx
Code; c0168c39 <poll_freewait+19/50>
9: 8b 43 18 mov 0x18(%ebx),%eax
Code; c0168c3c <poll_freewait+1c/50>
c: 8d 53 04 lea 0x4(%ebx),%edx
Code; c0168c3f <poll_freewait+1f/50>
f: e8 4c 78 fb ff call fffb7860 <_EIP+0xfffb7860>
Code; c0168c44 <poll_freewait+24/50>
14: 8b .byte 0x8b
Call Trace:
[<c0229e56>] unblank_screen+0x126/0x130
[<c011ca2c>] bust_spinlocks+0x2c/0x60
[<c010d775>] die+0x95/0x100
[<c011ce9e>] do_page_fault+0x1de/0x50c
[<c011dd5e>] recalc_task_prio+0x8e/0x1b0
[<c011ebfc>] schedule+0x34c/0x5b0
[<c011ccc0>] do_page_fault+0x0/0x50c
[<c02dc18f>] error_code+0x2f/0x38
[<c0168c30>] poll_freewait+0x10/0x50
[<c0168fd7>] do_select+0x1b7/0x2d0
[<c0168c70>] __pollwait+0x0/0xd0
[<c01693ef>] sys_select+0x2cf/0x4f0
[<c0157839>] __fput+0x79/0xc0
[<c0155f11>] sys_close+0x61/0xa0
[<c02db783>] syscall_call+0x7/0xb
Warning (Oops_read): Code line not seen, dumping what data is available
Trace; c0229e56 <unblank_screen+126/130>
Trace; c011ca2c <bust_spinlocks+2c/60>
Trace; c010d775 <die+95/100>
Trace; c011ce9e <do_page_fault+1de/50c>
Trace; c011dd5e <recalc_task_prio+8e/1b0>
Trace; c011ebfc <schedule+34c/5b0>
Trace; c011ccc0 <do_page_fault+0/50c>
Trace; c02dc18f <error_code+2f/38>
Trace; c0168c30 <poll_freewait+10/50>
Trace; c0168fd7 <do_select+1b7/2d0>
Trace; c0168c70 <__pollwait+0/d0>
Trace; c01693ef <sys_select+2cf/4f0>
Trace; c0157839 <__fput+79/c0>
Trace; c0155f11 <sys_close+61/a0>
Trace; c02db783 <syscall_call+7/b>
2 warnings and 1 error issued. Results may not be reliable.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Cress, Andrew R: "RE: stability problems with 2.4.24/Software RAID/ext3"
- In reply to: Norberto Bensa: "Oops with 2.6.1-rc2-mm1"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
