Re: 2.4.24 eth0: TX underrun, threshold adjusted.

From: Gabor Z. Papp (gzp_at_papp.hu)
Date: 01/10/04

  • Next message: Vojtech Pavlik: "Re: kernel 2.6.1 synaptics problems tapping and tap'n'drag" 
    To: Martin Josefsson <gandalf@wlug.westbo.se>
Date:	Sat, 10 Jan 2004 18:39:21 +0100

    * Martin Josefsson <gandalf@wlug.westbo.se>:

    | > eth0: TX underrun, threshold adjusted.
    | > [10 times]
    | > eth0: TX underrun, threshold adjusted.
    |
    | > eth0 intel eepro100
    |
    | I think you ran the eepro100 driver in 2.4.23 and now in 2.4.24 you are
    | using the e100 driver, am I correct?

    No, you aren't.

    | This isn't really an error, it's an indicator that the pci-bus doesn't
    | really keep up, then the NIC has to increase the threshold (it tries to
    | start sending the packet out before it's fully transferred from main
    | memory to the NIC, it hopes the rest of the packet will have been

    Funny because I have changed the mobo/cpu/ram from P3 to P4. Maybe
    its related to that change?

    | This happens with the eepro100 driver as well but it doesn't tell you
    | about it, it just increases the threshold and goes on.

    I'm using Becker's eepro100, I'm sure.

    | I hope this helps to explain this message.

    Thanks.

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Vojtech Pavlik: "Re: kernel 2.6.1 synaptics problems tapping and tap'n'drag"

    Relevant Pages

    • RE: BugReport: USB (ACPI), E100, SWSUSP problems (test5 vs. test3)
      ... > The NIC is detected correctly and ifconfig shows eth0 as ... But for some reason not a single Byte seems to go over the ... But that's only relevant when the driver is unloaded, ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: 8139too in 2.6.x tx timeout
      ... since the 2.6.2 driver and patches given in that thread ... eth0: Tx queue start entry 25 dirty entry 21. ... Tx descriptor 0 is 10080062. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • [bug]Broken driver for a SK nic
      ... eth0: ... Class: internal software error ... Msg: General: Driver release date not initialized ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: 3c59x on 2.6.0-test3->test6 slow
      ... > newer driver. ... Ok, could you send your .config too, i use the 3c59x driver and haven't ... > SIOCGMIIPHY on 'eth0' failed: ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • 2.4.24 eth0: TX underrun, threshold adjusted.
      ... In the server host klog got 12 "eth0: TX underrun, ... on the nfsroot client getting the same message 4 times. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)