USB in 2.6.X kernels

From: WESLAB - Ang Ho Soon (hosoon_at_weslab.com)
Date: 01/27/04

  • Next message: Russell King: "Re: airo_cs problem - kernel 2.6.1" 
    Date:	Tue, 27 Jan 2004 20:45:21 +0800
To: linux-kernel@vger.kernel.org

    Hi!

    I've a problem with 2.6.x (2.6.1, 2.6.1-rc1, 2.6.2-rc1) kernels with
    mine USB hardware. it has a NEC USB 2.0 OHCI based controller. 2.4.x
    don't seem to work as well.

    The kernel boots ok but USB debug messages does not point out much error
    except the following line: --> "usb 3-1: control timeout on ep0out" and
    the USB does not work when usb keyboard is plugged in.

    I've tried compiling USB (core, hid, ohci, ehci) both within kernel and
    as modules but with all not working.

    has anyone experienced USB OHCI host controller problems with new kernels?

    I've the following hardware:

    scanpci output
    ----------------------------------------------------------------------
    pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1279 device 0x0395
      Transmeta Corporation LongRun Northbridge

    pci bus 0x0000 cardnum 0x00 function 0x01: vendor 0x1279 device 0x0396
      Transmeta Corporation SDRAM controller

    pci bus 0x0000 cardnum 0x00 function 0x02: vendor 0x1279 device 0x0397
      Transmeta Corporation BIOS scratchpad

    pci bus 0x0000 cardnum 0x03 function 0x00: vendor 0x10b9 device 0x5451
      ALi Corporation M5451 PCI AC-Link Controller Audio Device

    pci bus 0x0000 cardnum 0x06 function 0x00: vendor 0x126f device 0x0712
      Silicon Motion, Inc. SM712 LynxEM+

    pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x10b9 device 0x1533
      ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]

    pci bus 0x0000 cardnum 0x0a function 0x00: vendor 0x1317 device 0x0985
      Linksys Network Everywhere Fast Ethernet 10/100 model NC100

    pci bus 0x0000 cardnum 0x0b function 0x00: vendor 0x1260 device 0x3890
      Harris Semiconductor Device unknown

    pci bus 0x0000 cardnum 0x0d function 0x00: vendor 0x1033 device 0x0035
      NEC Corporation USB

    pci bus 0x0000 cardnum 0x0d function 0x01: vendor 0x1033 device 0x0035
      NEC Corporation USB

    pci bus 0x0000 cardnum 0x0d function 0x02: vendor 0x1033 device 0x00e0
      NEC Corporation USB 2.0

    pci bus 0x0000 cardnum 0x0e function 0x00: vendor 0x1180 device 0x0476
      Ricoh Co Ltd RL5c476 II

    pci bus 0x0000 cardnum 0x0e function 0x01: vendor 0x1180 device 0x0476
      Ricoh Co Ltd RL5c476 II

    pci bus 0x0000 cardnum 0x10 function 0x00: vendor 0x10b9 device 0x5229
      ALi Corporation M5229 IDE

    pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x10b9 device 0x7101
      ALi Corporation M7101 PMU

    dmesg output (front part truncated)
    ----------------------------------------------------------------------
    kernel 2.6.2-rc1

    000000000e7f0000 - 000000000e7fe000 (ACPI data)
      BIOS-e820: 000000000e7fe000 - 000000000e800000 (ACPI NVS)
      BIOS-e820: 000000000e800000 - 000000000e900000 (reserved)
      BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    231MB LOWMEM available.
    On node 0 totalpages: 59376
       DMA zone: 4096 pages, LIFO batch:1
       Normal zone: 55280 pages, LIFO batch:13
       HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 PTLTD ) @ 0x000f7f60
    ACPI: RSDT (v001 PTLTD RSDT 0x06040005 LTP 0x00000000) @ 0x0e7fafa1
    ACPI: FADT (v001 TMETA PDB.ALI 0x06040005 PTL 0x000f4240) @ 0x0e7fde6a
    ACPI: SSDT (v001 PTLTD ACPIPST1 0x06040005 LTP 0x00000001) @ 0x0e7fdede
    ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040005 LTP 0x00000001) @ 0x0e7fdfd8
    ACPI: DSDT (v001 TM PDBALI35 0x06040005 MSFT 0x0100000e) @ 0x00000000
    Building zonelist for node : 0
    Kernel command line: root=/dev/hda1
    Initializing CPU#0
    PID hash table entries: 1024 (order 10: 8192 bytes)
    Detected 742.086 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Memory: 231128k/237504k available (2161k kernel code, 5656k reserved,
    804k data, 136k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 1138.68 BogoMIPS
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: 0080893f 0081813f 00000000 00000000
    CPU: After vendor identify, caps: 0080893f 0081813f 000001ce 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line)
    CPU: L2 Cache: 512K (128 bytes/line)
    CPU: Processor revision 1.4.1.0, 733 MHz
    CPU: Code Morphing Software revision 4.4.3-10-184
    CPU: 20030618 15:27 official release 4.4.3#1
    CPU: After all inits, caps: 0080893f 0081813f 000001ce 00000000
    CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 stepping 03
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=0
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20031002
    ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
    ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 7)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *7)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10)
    ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
    ACPI: PCI Interrupt Link [LNKU] (IRQs 11)
    ACPI: Embedded Controller [EC0] (gpe 1)
    Linux Kernel Card Services
       options: [pci] [cardbus] [pm]
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
    ACPI: No IRQ known for interrupt pin A of device 0000:00:10.0 - using
    IRQ 255
    PCI: Using ACPI for IRQ routing
    PCI: if you experience problems, try using option 'pci=noacpi' or even
    'acpi=off'
    SBF: Simple Boot Flag extension found and enabled.
    SBF: Setting boot flags 0x1
    ikconfig 0.7 with /proc/config*
    NTFS driver 2.1.6 [Flags: R/O].
    Activating ISA DMA hang workarounds.
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    fakephp: Fake PCI Hot Plug Controller Driver
    acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
    ACPI: AC Adapter [ACAD] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
    pty: 256 Unix98 ptys configured
    Real Time Clock Driver v1.12
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: loaded (max 8 devices)
    Using anticipatory io scheduler
    nbd: registered device at major 43
    Loaded prism54 driver, version 1.0.2.2
    PCI: Enabling device 0000:00:0b.0 (0010 -> 0012)
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    hda: TOSHIBA THNCF256MMA, CFA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: max request size: 128KiB
    hda: 500736 sectors (256 MB) w/2KiB Cache, CHS=978/16/32
      hda: hda1
    Yenta: CardBus bridge found at 0000:00:0e.0 [0000:0000]
    Yenta: ISA IRQ mask 0x0898, PCI irq 10
    Socket status: 30000006
    Yenta: CardBus bridge found at 0000:00:0e.1 [0000:0000]
    irq 5: nobody cared!
    Call Trace:
      [<c010c8fa>] __report_bad_irq+0x2a/0x90
      [<c010c9f0>] note_interrupt+0x70/0xb0
      [<c010ccb0>] do_IRQ+0x130/0x140
      [<c010af88>] common_interrupt+0x18/0x20
      [<c0125190>] run_timer_softirq+0x0/0x1b0
      [<c0120da5>] do_softirq+0x95/0xa0
      [<c010cc87>] do_IRQ+0x107/0x140
      [<c010af88>] common_interrupt+0x18/0x20
      [<c010d29e>] setup_irq+0x9e/0xf0
      [<c027a9a0>] yenta_interrupt+0x0/0x40
      [<c010cda6>] request_irq+0xa6/0xe0
      [<c027be7e>] yenta_probe+0x18e/0x250
      [<c027a9a0>] yenta_interrupt+0x0/0x40
      [<c01f6b12>] pci_device_probe_static+0x52/0x70
      [<c01f6b6c>] __pci_device_probe+0x3c/0x50
      [<c01f6bac>] pci_device_probe+0x2c/0x50
      [<c0237fff>] bus_match+0x3f/0x70
      [<c023812c>] driver_attach+0x5c/0x90
      [<c02383dd>] bus_add_driver+0x8d/0xa0
      [<c023882f>] driver_register+0x2f/0x40
      [<c025c6d7>] ide_register_driver+0xf7/0x120
      [<c01f6d9c>] pci_register_driver+0x5c/0x90
      [<c03fa74f>] yenta_socket_init+0xf/0x20
      [<c03e87cb>] do_initcalls+0x2b/0xa0
      [<c012cf8f>] init_workqueues+0xf/0x30
      [<c01050cd>] init+0x2d/0x130
      [<c01050a0>] init+0x0/0x130
      [<c0108cb9>] kernel_thread_helper+0x5/0xc

    handlers:
    [<c027a9a0>] (yenta_interrupt+0x0/0x40)
    Disabling IRQ #5
    Yenta: ISA IRQ mask 0x0898, PCI irq 5
    Socket status: 30000006
    mice: PS/2 mouse device common for all mice
    ts: Compaq touchscreen protocol output
    evbug.c: Connected device: "PC Speaker", isa0061/input0
    input: PC Speaker
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25
    19:16:36 2003 UTC).
    PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
    ALSA device list:
       #0: ALI 5451 at 0x1400, irq 5
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 16Kbytes
    TCP: Hash tables configured (established 16384 bind 32768)
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    BIOS EDD facility v0.10 2003-Oct-11, 1 devices found
    Please report your BIOS at http://domsch.com/linux/edd30/results.html
      hda: hda1
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 136k freed
    EXT3 FS on hda1, internal journal
    drivers/usb/core/usb.c: registered new driver usbfs
    drivers/usb/core/usb.c: registered new driver hub
    ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 64
    ehci_hcd 0000:00:0d.2: EHCI Host Controller
    ehci_hcd 0000:00:0d.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5
    ehci_hcd 0000:00:0d.2: reset portroute 1 0 1 0 0
    ehci_hcd 0000:00:0d.2: reset hcc_params e806 thresh 0 uframes
    256/512/1024 park
    ehci_hcd 0000:00:0d.2: capability 0001 at e8
    ehci_hcd 0000:00:0d.2: irq 7, pci mem cf01d400
    ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:0d.2: reset command 080b22 park=3 ithresh=8 Async
    period=1024 Reset HALT
    ehci_hcd 0000:00:0d.2: init command 010b09 park=3 ithresh=1 period=256 RUN
    ehci_hcd 0000:00:0d.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
    ehci_hcd 0000:00:0d.2: root hub device address 1
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    drivers/usb/core/message.c: USB device number 1 default language ID 0x409
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.2-rc1-tx2000 ehci_hcd
    usb usb1: SerialNumber: 0000:00:0d.2
    drivers/usb/core/usb.c: usb_hotplug
    usb usb1: registering 1-0:1.0 (config #1, interface 0)
    drivers/usb/core/usb.c: usb_hotplug
    hub 1-0:1.0: usb_probe_interface
    hub 1-0:1.0: usb_probe_interface - got id
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 5 ports detected
    hub 1-0:1.0: standalone hub
    hub 1-0:1.0: individual port power switching
    hub 1-0:1.0: individual port over-current protection
    hub 1-0:1.0: Single TT
    hub 1-0:1.0: TT requires at most 8 FS bit times
    hub 1-0:1.0: Port indicators are not supported
    hub 1-0:1.0: power on to power good time: 0ms
    hub 1-0:1.0: hub controller current requirement: 0mA
    hub 1-0:1.0: local power source is good
    hub 1-0:1.0: no over-current condition exists
    hub 1-0:1.0: enabling power on all ports
    ehci_hcd 0000:00:0d.2: GetStatus port 2 status 001803 POWER sig=j CSC
    CONNECT
    hub 1-0:1.0: port 2, status 501, change 1, 480 Mb/s
    hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501
    ehci_hcd 0000:00:0d.2: port 2 full speed --> companion
    ehci_hcd 0000:00:0d.2: GetStatus port 2 status 003801 POWER OWNER sig=j
      CONNECT
    ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ohci_hcd: block sizes: ed 64 td 64
    ohci_hcd 0000:00:0d.0: OHCI Host Controller
    ohci_hcd 0000:00:0d.0: reset, control = 0x97
    ohci_hcd 0000:00:0d.0: irq 5, pci mem cf034000
    ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:0d.0: root hub device address 1
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    drivers/usb/core/message.c: USB device number 1 default language ID 0x409
    usb usb2: Product: OHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.2-rc1-tx2000 ohci_hcd
    usb usb2: SerialNumber: 0000:00:0d.0
    drivers/usb/core/usb.c: usb_hotplug
    usb usb2: registering 2-0:1.0 (config #1, interface 0)
    drivers/usb/core/usb.c: usb_hotplug
    hub 2-0:1.0: usb_probe_interface
    hub 2-0:1.0: usb_probe_interface - got id
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    hub 2-0:1.0: standalone hub
    hub 2-0:1.0: ganged power switching
    hub 2-0:1.0: global over-current protection
    hub 2-0:1.0: Port indicators are not supported
    hub 2-0:1.0: power on to power good time: 30ms
    hub 2-0:1.0: hub controller current requirement: 0mA
    hub 2-0:1.0: local power source is good
    hub 2-0:1.0: no over-current condition exists
    hub 2-0:1.0: enabling power on all ports
    ohci_hcd 0000:00:0d.0: created debug files
    ohci_hcd 0000:00:0d.0: OHCI controller state
    ohci_hcd 0000:00:0d.0: OHCI 1.0, with legacy support registers
    ohci_hcd 0000:00:0d.0: control 0x08f HCFS=operational IE PLE CBSR=3
    ohci_hcd 0000:00:0d.0: cmdstatus 0x00000 SOC=0
    ohci_hcd 0000:00:0d.0: intrstatus 0x00000004 SF
    ohci_hcd 0000:00:0d.0: intrenable 0x80000012 MIE UE WDH
    ohci_hcd 0000:00:0d.0: hcca frame #01be
    ohci_hcd 0000:00:0d.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3
    ohci_hcd 0000:00:0d.0: roothub.b 00000000 PPCM=0000 DR=0000
    ohci_hcd 0000:00:0d.0: roothub.status 00000000
    ohci_hcd 0000:00:0d.0: roothub.portstatus [0] 0x00000100 PPS
    ohci_hcd 0000:00:0d.0: roothub.portstatus [1] 0x00000100 PPS
    ohci_hcd 0000:00:0d.0: roothub.portstatus [2] 0x00000100 PPS
    ohci_hcd 0000:00:0d.1: OHCI Host Controller
    ohci_hcd 0000:00:0d.1: reset, control = 0x97
    ohci_hcd 0000:00:0d.1: irq 5, pci mem cf036000
    ehci_hcd 0000:00:0d.2: GetStatus port 2 status 001803 POWER sig=j CSC
    CONNECT
    hub 1-0:1.0: port 2, status 501, change 1, 480 Mb/s
    ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:0d.1: root hub device address 1
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    drivers/usb/core/message.c: USB device number 1 default language ID 0x409
    usb usb3: Product: OHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.2-rc1-tx2000 ohci_hcd
    usb usb3: SerialNumber: 0000:00:0d.1
    drivers/usb/core/usb.c: usb_hotplug
    usb usb3: registering 3-0:1.0 (config #1, interface 0)
    drivers/usb/core/usb.c: usb_hotplug
    hub 3-0:1.0: usb_probe_interface
    hub 3-0:1.0: usb_probe_interface - got id
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 3-0:1.0: standalone hub
    hub 3-0:1.0: ganged power switching
    hub 3-0:1.0: global over-current protection
    hub 3-0:1.0: Port indicators are not supported
    hub 3-0:1.0: power on to power good time: 30ms
    hub 3-0:1.0: hub controller current requirement: 0mA
    hub 3-0:1.0: local power source is good
    hub 3-0:1.0: no over-current condition exists
    hub 3-0:1.0: enabling power on all ports
    hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501
    ohci_hcd 0000:00:0d.1: created debug files
    ohci_hcd 0000:00:0d.1: OHCI controller state
    ohci_hcd 0000:00:0d.1: OHCI 1.0, with legacy support registers
    ohci_hcd 0000:00:0d.1: control 0x08f HCFS=operational IE PLE CBSR=3
    ohci_hcd 0000:00:0d.1: cmdstatus 0x00000 SOC=0
    ohci_hcd 0000:00:0d.1: intrstatus 0x00000004 SF
    ohci_hcd 0000:00:0d.1: intrenable 0x80000012 MIE UE WDH
    ohci_hcd 0000:00:0d.1: hcca frame #01a4
    ohci_hcd 0000:00:0d.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2
    ohci_hcd 0000:00:0d.1: roothub.b 00000000 PPCM=0000 DR=0000
    ohci_hcd 0000:00:0d.1: roothub.status 00000000
    ohci_hcd 0000:00:0d.1: roothub.portstatus [0] 0x00000100 PPS
    ohci_hcd 0000:00:0d.1: roothub.portstatus [1] 0x00000100 PPS
    ehci_hcd 0000:00:0d.2: port 2 full speed --> companion
    ehci_hcd 0000:00:0d.2: GetStatus port 2 status 003801 POWER OWNER sig=j
      CONNECT
    drivers/usb/core/usb.c: registered new driver hiddev
    drivers/usb/core/usb.c: registered new driver hid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    ohci_hcd 0000:00:0d.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC
    PPS CCS
    hub 3-0:1.0: port 1, status 101, change 1, 12 Mb/s
    hub 3-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101
    ohci_hcd 0000:00:0d.1: GetStatus roothub.portstatus [1] = 0x00100103
    PRSC PPS PES CCS
    hub 3-0:1.0: new USB device on port 1, assigned address 2
    eth0: islpci_open()
    eth0: resetting device...
    eth0: uploading firmware...
    eth0: firmware uploaded done, now triggering reset...
    eth0: prism54_mib_init()
    eth0: done with prism54_mib_init()! -- Client Managed mode
    request_module: failed /sbin/modprobe -- net-pf-4. error = 256
    eth0: prism54_mib_init()
    eth0: done with prism54_mib_init()! -- Client Managed mode
    usb 3-1: control timeout on ep0out
    ohci_hcd 0000:00:0d.1: Unlink after no-IRQ? Different ACPI or APIC
    settings may help.
    TRAP: oid 0x18000001, device 2, flags 0x0 length 12
    TRAP: oid 0x18000003, device 2, flags 0x0 length 12
    TRAP: oid 0x1, device 2, flags 0x0 length 4
    TRAP: oid 0x18000001, device 2, flags 0x0 length 12
    TRAP: oid 0x1800000b, device 2, flags 0x0 length 12
    TRAP: oid 0x1, device 2, flags 0x0 length 4
    TRAP: oid 0x18000001, device 2, flags 0x0 length 12
    TRAP: oid 0x18000003, device 2, flags 0x0 length 12
    TRAP: oid 0x1, device 2, flags 0x0 length 4
    request_module: failed /sbin/modprobe -- net-pf-10. error = 256
    TRAP: oid 0x18000001, device 2, flags 0x0 length 12
    TRAP: oid 0x1800000b, device 2, flags 0x0 length 12
    TRAP: oid 0x1, device 2, flags 0x0 length 4
    TRAP: oid 0x18000001, device 2, flags 0x0 length 12
    TRAP: oid 0x1800000b, device 2, flags 0x0 length 12
    TRAP: oid 0x1, device 2, flags 0x0 length 4
    request_module: failed /sbin/modprobe -- char-major-4-65. error = 256 

    -- 
Sincerely,
Ang Ho Soon
hosoon@weslab.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
  • Next message: Russell King: "Re: airo_cs problem - kernel 2.6.1"