Stack Trace - problem unknown (__crc_ide_bus_type) - system running ok
From: ck (x_at_dsl.pipex.com)
Date: 02/11/04
- Previous message: Stephen Hemminger: "Re: [PATCH] [2.6] [2/2] hlist: remove IFs from hlist functions"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Wed, 11 Feb 2004 06:43:32 +0000 To: linux-kernel@vger.kernel.org
[1.] Stack Trace - problem unknown - system running ok?
[2.] I think it happened during the modules loading stage
[3.] kernel, pci
[4.] Linux version 2.6.3-rc2 (root@diogenis) (gcc version 3.3.2 20031218
(Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 SMP Tue Feb 10 05:37:34 GMT
2004
[5.]
-------------------------------------
dmesg
-------------------------------------
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00200018fd]
Badness in kobject_get at lib/kobject.c:431
Call Trace:
[<c0241b8d>] kobject_get+0x4d/0x50
[<c028c768>] get_device+0x18/0x30
[<c028d3eb>] bus_for_each_dev+0x6b/0xd0
[<f8eadadd>] nodemgr_node_probe+0x4d/0x130 [ieee1394]
[<f8ead9a0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<f8eadf48>] nodemgr_host_thread+0x188/0x1b0 [ieee1394]
[<f8eaddc0>] nodemgr_host_thread+0x0/0x1b0 [ieee1394]
[<c0106ea9>] kernel_thread_helper+0x5/0xc
Unable to handle kernel paging request at virtual address b828ec83
printing eip:
b828ec83
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<b828ec83>] Not tainted
EFLAGS: 00010282
EIP is at 0xb828ec83
eax: b828ec83 ebx: f8eba388 ecx: f7505f9c edx: 00000000
esi: f8ead3a0 edi: 00000000 ebp: f8eac070 esp: f7505f40
ds: 007b es: 007b ss: 0068
Process knodemgrd_0 (pid: 3442, threadinfo=f7504000 task=f7d2a6b0)
Stack: c0241c28 f8eba388 f8eba364 f8eba36c f8eba2c0 f74c6c44 c028d408
f8eba388
f7505f9c f8eba30c 00000000 f74c6c3c f7505f9c f76077d8 f7505f9c
f8eadadd
f8eba2c0 f74c6c3c f7505f9c f8ead9a0 f75f8000 f76077d8 f75f8000
f76077d8
Call Trace:
[<c0241c28>] kobject_cleanup+0x98/0xa0
[<c028d408>] bus_for_each_dev+0x88/0xd0
[<f8eadadd>] nodemgr_node_probe+0x4d/0x130 [ieee1394]
[<f8ead9a0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<f8eadf48>] nodemgr_host_thread+0x188/0x1b0 [ieee1394]
[<f8eaddc0>] nodemgr_host_thread+0x0/0x1b0 [ieee1394]
[<c0106ea9>] kernel_thread_helper+0x5/0xc
Code: Bad EIP value.
<6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
-------------------------------------
[6.]
--------------------------------------
[7.]
-----------------------------------------
[7.1.]
-----------------------------------------
nm vmlinux | sort | less
-----------------------------------------
b7debdf0 A __crc_inet_accept
b7e2b4a5 A __crc_auth_domain_put
b7e555a9 A __crc_rpc_new_child
b7fdcaef A __crc_ide_bus_type
b8328626 A __crc_blk_queue_merge_bvec
b837c742 A __crc_deactivate_super
b8504b1c A __crc_read_cache_page
b8520a43 A __crc_auth_unix_add_addr
-------------------------------------
root@diogenis linux-2.6.3-rc2 # dmesg | ksymoops -v vmlinux -m System.map
-------------------------------------
ksymoops 2.4.9 on i686 2.6.3-rc2. Options used
-v vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.3-rc2/ (default)
-m System.map (specified)
Error (regular_file): read_ksyms stat /proc/ksyms failed
ksymoops: No such file or directory
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Machine check exception polling timer started.
8139too Fast Ethernet driver 0.9.27
Call Trace:
[<c0241b8d>] kobject_get+0x4d/0x50
[<c028c768>] get_device+0x18/0x30
[<c028d3eb>] bus_for_each_dev+0x6b/0xd0
[<f8eadadd>] nodemgr_node_probe+0x4d/0x130 [ieee1394]
[<f8ead9a0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<f8eadf48>] nodemgr_host_thread+0x188/0x1b0 [ieee1394]
[<f8eaddc0>] nodemgr_host_thread+0x0/0x1b0 [ieee1394]
[<c0106ea9>] kernel_thread_helper+0x5/0xc
Unable to handle kernel paging request at virtual address b828ec83
b828ec83
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<b828ec83>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: b828ec83 ebx: f8eba388 ecx: f7505f9c edx: 00000000
esi: f8ead3a0 edi: 00000000 ebp: f8eac070 esp: f7505f40
ds: 007b es: 007b ss: 0068
Stack: c0241c28 f8eba388 f8eba364 f8eba36c f8eba2c0 f74c6c44 c028d408
f8eba388
f7505f9c f8eba30c 00000000 f74c6c3c f7505f9c f76077d8 f7505f9c
f8eadadd
f8eba2c0 f74c6c3c f7505f9c f8ead9a0 f75f8000 f76077d8 f75f8000
f76077d8
Call Trace:
[<c0241c28>] kobject_cleanup+0x98/0xa0
[<c028d408>] bus_for_each_dev+0x88/0xd0
[<f8eadadd>] nodemgr_node_probe+0x4d/0x130 [ieee1394]
[<f8ead9a0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<f8eadf48>] nodemgr_host_thread+0x188/0x1b0 [ieee1394]
[<f8eaddc0>] nodemgr_host_thread+0x0/0x1b0 [ieee1394]
[<c0106ea9>] kernel_thread_helper+0x5/0xc
Code: Bad EIP value.
Trace; c0241b8d <kobject_get+4d/50>
Trace; c028c768 <get_device+18/30>
Trace; c028d3eb <bus_for_each_dev+6b/d0>
Trace; f8eadadd <__crc_device_suspend+54f4e/255e4e>
Trace; f8ead9a0 <__crc_device_suspend+54e11/255e4e>
Trace; f8eadf48 <__crc_device_suspend+553b9/255e4e>
Trace; f8eaddc0 <__crc_device_suspend+55231/255e4e>
Trace; c0106ea9 <kernel_thread_helper+5/c>
>>EIP; b828ec83 <__crc_ide_bus_type+2b2194/34bb37> <=====
>>eax; b828ec83 <__crc_ide_bus_type+2b2194/34bb37>
>>ebx; f8eba388 <__crc_device_suspend+617f9/255e4e>
>>ecx; f7505f9c <__crc_redraw_screen+18dbbb/4198ad>
>>esi; f8ead3a0 <__crc_device_suspend+54811/255e4e>
>>ebp; f8eac070 <__crc_device_suspend+534e1/255e4e>
>>esp; f7505f40 <__crc_redraw_screen+18db5f/4198ad>
Trace; c0241c28 <kobject_cleanup+98/a0>
Trace; c028d408 <bus_for_each_dev+88/d0>
Trace; f8eadadd <__crc_device_suspend+54f4e/255e4e>
Trace; f8ead9a0 <__crc_device_suspend+54e11/255e4e>
Trace; f8eadf48 <__crc_device_suspend+553b9/255e4e>
Trace; f8eaddc0 <__crc_device_suspend+55231/255e4e>
Trace; c0106ea9 <kernel_thread_helper+5/c>
1 error issued. Results may not be reliable.
-------------------------------------------------------------------------
root@diogenis linux-2.6.3-rc2 # sh scripts/ver_linux
---------------------------------------------------------------
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux diogenis 2.6.3-rc2 #1 SMP Tue Feb 10 05:37:34 GMT 2004 i686 AMD
Athlon(tm) MP 1600+ AuthenticAMD GNU/Linux
Gnu C 3.3.2
Gnu make 3.80
util-linux 2.12
mount 2.12
module-init-tools 0.9.15-pre4
e2fsprogs 1.34
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.15
Net-tools 1.60
Kbd 1.08
Sh-utils 5.0.91
Modules Loaded parport_pc lp parport ohci_hcd emu10k1_gp
gameport ohci1394 ieee1394 snd_seq_midi snd_emu10k1_synth snd_emux_synth
snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec
snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq
snd_seq_device snd_pcm_oss snd_pcm snd_page_alloc snd_timer
snd_mixer_oss snd soundcore ide_floppy usblp usbcore 8139too mii crc32
---------------------------------------
[7.2.]
--------------------------------------
root@diogenis linux-2.6.3-rc2 # cat /proc/cpuinfo
---------------------------------------------
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) MP 1600+
stepping : 2
cpu MHz : 1399.845
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2768.89
processor : 1
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1399.845
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2793.47
---------------------------------------
[7.3.]
---------------------------------------
root@diogenis linux-2.6.3-rc2 # cat /proc/modules
-------------------------------------
parport_pc 40000 1 - Live 0xf8ed8000
lp 11428 0 - Live 0xf8dc0000
parport 45096 2 parport_pc,lp, Live 0xf8ecb000
ohci_hcd 19652 0 - Live 0xf8e97000
emu10k1_gp 3584 0 - Live 0xf8d35000
gameport 4992 1 emu10k1_gp, Live 0xf8de6000
ohci1394 36676 0 - Live 0xf8e8d000
ieee1394 83568 1 ohci1394, Live 0xf8ea6000
snd_seq_midi 8544 0 - Live 0xf8db2000
snd_emu10k1_synth 8128 0 - Live 0xf8daf000
snd_emux_synth 40064 1 snd_emu10k1_synth, Live 0xf8e82000
snd_seq_virmidi 8000 1 snd_emux_synth, Live 0xf8d67000
snd_seq_midi_emul 8000 1 snd_emux_synth, Live 0xf8d5d000
snd_emu10k1 101060 2 snd_emu10k1_synth, Live 0xf8df3000
snd_rawmidi 25760 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1, Live
0xf8db8000
snd_ac97_codec 63492 1 snd_emu10k1, Live 0xf8dc4000
snd_util_mem 4544 2 snd_emux_synth,snd_emu10k1, Live 0xf8d60000
snd_hwdep 9632 2 snd_emux_synth,snd_emu10k1, Live 0xf8d37000
snd_seq_oss 36224 0 - Live 0xf8d6a000
snd_seq_midi_event 8128 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss, Live
0xf8d5a000
snd_seq 59408 8
snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event,
Live 0xf8d9f000
snd_seq_device 8200 7
snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_seq_oss,snd_seq,
Live 0xf8d56000
snd_pcm_oss 54564 0 - Live 0xf8d90000
snd_pcm 103072 2 snd_emu10k1,snd_pcm_oss, Live 0xf8d75000
snd_page_alloc 12164 2 snd_emu10k1,snd_pcm, Live 0xf8d3b000
snd_timer 27204 2 snd_seq,snd_pcm, Live 0xf8d3f000
snd_mixer_oss 19968 2 snd_pcm_oss, Live 0xf8cf5000
snd 56292 16
snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_util_mem,snd_hwdep,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss,
Live 0xf8d47000
soundcore 10656 2 snd, Live 0xf8d31000
ide_floppy 19072 0 - Live 0xf896b000
usblp 13504 0 - Live 0xf8966000
usbcore 108444 4 ohci_hcd,usblp, Live 0xf8986000
8139too 25664 0 - Live 0xf895e000
mii 5120 1 8139too, Live 0xf8952000
crc32 4416 1 8139too, Live 0xf894f000
-----------------------------------------------
[7.4.]
--------------------------------------
root@diogenis linux-2.6.3-rc2 # cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-10ff : 0000:00:0b.0
1000-10ff : 8139too
1400-141f : 0000:00:0c.0
1400-141f : EMU10K1
1430-143f : 0000:00:08.0
1430-1437 : ide2
1438-143f : ide3
1440-1443 : 0000:00:00.0
1444-1447 : 0000:00:08.0
1446-1446 : ide3
1448-144f : 0000:00:08.0
1448-144f : ide3
1450-1453 : 0000:00:08.0
1452-1452 : ide2
1458-145f : 0000:00:08.0
1458-145f : ide2
1460-1467 : 0000:00:0c.1
1460-1467 : emu10k1-gp
f000-f00f : 0000:00:07.1
f000-f007 : ide0
f008-f00f : ide1
root@diogenis linux-2.6.3-rc2 # cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000dc000-000dcfff : 0000:00:07.4
000dc000-000dcfff : ohci_hcd
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
00100000-0034431a : Kernel code
0034431b-0042013f : Kernel data
3fff0000-3ffffbff : ACPI Tables
3ffffc00-3fffffff : ACPI Non-volatile Storage
e8000000-e8003fff : 0000:00:08.0
e8004000-e8007fff : 0000:00:0c.2
e8009000-e80097ff : 0000:00:0c.2
e8009000-e80097ff : ohci1394
e8009800-e80098ff : 0000:00:0b.0
e8009800-e80098ff : 8139too
e9000000-e9ffffff : PCI Bus #01
e9000000-e9ffffff : 0000:01:05.0
ea000000-ea000fff : 0000:00:00.0
ec000000-efffffff : 0000:00:00.0
f0000000-f7ffffff : PCI Bus #01
f0000000-f7ffffff : 0000:01:05.0
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
------------------------------------
[7.5.]
------------------------------------
root@diogenis linux-2.6.3-rc2 # lspci -vvv
------------------------------------------
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
System Controller (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at ea000000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at 1440 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit-
FW- Rate=x4
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
AGP Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e9000000-e9ffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ISA
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-766 [ViperPlus]
IDE (rev 01) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ACPI
(rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-766 [ViperPlus]
USB (rev 07) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at 000dc000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Unknown mass storage controller: Promise Technology, Inc. 20268
(rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra100TX2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 4500ns max), cache line size 10
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1458 [size=8]
Region 1: I/O ports at 1450 [size=4]
Region 2: I/O ports at 1448 [size=8]
Region 3: I/O ports at 1444 [size=4]
Region 4: I/O ports at 1430 [size=16]
Region 5: Memory at e8000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=16K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at e8009800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0c.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Audigy Player
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1400 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.1 Input device controller: Creative Labs SB Audigy MIDI/Game port
(rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Game Port
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at 1460 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
(prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), cache line size 10
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e8009000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e8004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
01:05.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2
MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
------------------------------------
[7.6.] no scsi
-----------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Stephen Hemminger: "Re: [PATCH] [2.6] [2/2] hlist: remove IFs from hlist functions"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
