Re: Errors on 2th ide channel of promise ultra100 tx2
From: Erik van Engelen (Info_at_vanE.nl)
Date: 02/28/04
- Previous message: Martin Bene: "Re: Network error with Intel E1000 Adapter on update 2.4.25 ==> 2.6.3"
- In reply to: Marcelo Tosatti: "Re: Errors on 2th ide channel of promise ultra100 tx2"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Sat, 28 Feb 2004 13:13:30 +0100 To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Hi,
Thanks for the fast reaction.
Marcelo Tosatti wrote:
> I'm clueless about this, anyway...
>
> On Fri, 27 Feb 2004, Erik van Engelen wrote:
>
>
>>Hi,
>>
>>I've got a Proliant 2500 running a 2.4.25 kernel. It has 2 pentium pro
>>CPUs and a smart-2/E disk array on EISA bus from which it boots.
>>
>>I added a promise ultra100 tx2 ide cart and put on 3 disks. During boot
>>i get a couple of errors but everything seems to work ok. When
>>read/write to a disk on the first ide-channel everything is ok. When i
>>read/write to a disk on the second ide-channel everything is ok. But
>>when i try to read/write to both disks at once i get these errors:
>>
>>hdh: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>>hdh: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>
>
> Are you using DMA?
>
I've tried it with and without DMA. But in both cases i got errors
although the were different. I made some changes so i can't post the
error with the DMA turned on. I can reverse the changes on Monday and
post the errors for you.
>
>
> Can you please save and post the 2.6.3 panic?
>
I'm trying to get a serial line connection working to log the bootlogs.
I can make them as well on Monday.
I tried to boot with the cpqarray removed from the 2.6.3 kernel. In that
case i don't get the errors from the ide devices during the kernel boot
so i guess the solution made in the 2.6 according the ide problem is
working. Again on Monday i want to try the patch from Erik B. Andersen
on the 2.4 kernel. If i understood it all right. I'm not really into
kernel hacking etc.
THX for the help so far..
Erik van Engelen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Martin Bene: "Re: Network error with Intel E1000 Adapter on update 2.4.25 ==> 2.6.3"
- In reply to: Marcelo Tosatti: "Re: Errors on 2th ide channel of promise ultra100 tx2"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
