PROBLEM: compiling NTFS write support

andrea.fracasso_at_infoware-srl.com
Date: 05/12/04

  • Next message: Mihai Rusu: "Re: Status field in ps output for threaded programs in 2.6 kernel"
    Date:	Wed, 12 May 2004 12:14:25 +0200 (CEST)
    To: linux-kernel@vger.kernel.org
    
    

    Hi, I have found a problem compiling te source of kernel 2.6.6, if I
    enable NTFS write support when i run "make" i get this error:

    ....
      CC fs/ntfs/inode.o
      CC fs/ntfs/logfile.o
    {standard input}: Assembler messages:
    {standard input}:683: Error: suffix or operands invalid for `bsf'
    make[2]: *** [fs/ntfs/logfile.o] Error 1
    make[1]: *** [fs/ntfs] Error 2
    make: *** [fs] Error 2

    my kernel version is:
    Linux version 2.6.5-AS1500 (root@ntb-gozzolox) (gcc version 3.3.2 20031022
    (Red Hat Linux 3.3.2-1)) #3 Thu Apr 15 10:13:11 CEST 2004

    my cpu is:

    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 15
    model : 4
    model name : AMD Athlon(tm) 64 Processor 3200+
    stepping : 8
    cpu MHz : 1794.931
    cache size : 1024 KB
    fpu : yes
    fpu_exception : yes
    cpuid level : 1
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
    cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext
    3dnow
    bogomips : 3538.94
    TLB size : 1088 4K pages
    clflush size : 64
    cache_alignment : 64
    address sizes : 40 bits physical, 48 bits virtual
    power management: ts fid vid ttp

    my loaded modules are:

    ipv6 227488 12 - Live 0xffffffffa00c0000
    lp 10832 0 - Live 0xffffffffa00bc000
    autofs 14272 0 - Live 0xffffffffa00b7000
    tg3 69188 0 - Live 0xffffffffa00a5000
    floppy 60664 0 - Live 0xffffffffa0095000
    sg 36088 0 - Live 0xffffffffa008b000
    scsi_mod 121056 1 sg, Live 0xffffffffa006c000
    parport_pc 24384 0 - Live 0xffffffffa0065000
    parport 37900 2 lp,parport_pc, Live 0xffffffffa005a000
    eth1394 18192 0 - Live 0xffffffffa0054000
    ohci1394 31172 0 - Live 0xffffffffa004b000
    ieee1394 98904 2 eth1394,ohci1394, Live 0xffffffffa0031000
    hid 24064 0 - Live 0xffffffffa002a000
    ehci_hcd 24964 0 - Live 0xffffffffa0022000
    uhci_hcd 29600 0 - Live 0xffffffffa0019000
    usbcore 97264 5 hid,ehci_hcd,uhci_hcd, Live 0xffffffffa0000000

    My loaded driver and hardware information:
    /proc/ioports
    0000-001f : dma1
    0020-0021 : pic1
    0040-005f : timer
    0060-006f : keyboard
    0070-0077 : rtc
    0080-008f : dma page reg
    00a0-00a1 : pic2
    00c0-00df : dma2
    00f0-00ff : fpu
    0170-0177 : ide1
    01f0-01f7 : ide0
    0376-0376 : ide1
    03c0-03df : vga+
    03f6-03f6 : ide0
    0cf8-0cff : PCI conf1
    1000-100f : 0000:00:11.1
      1000-1007 : ide0
      1008-100f : ide1
    1020-103f : 0000:00:10.0
      1020-103f : uhci_hcd
    1040-105f : 0000:00:10.1
      1040-105f : uhci_hcd
    1060-107f : 0000:00:10.2
      1060-107f : uhci_hcd
    1400-14ff : 0000:00:11.5
    1800-18ff : 0000:00:11.6
    2000-2fff : PCI Bus #01
      2000-20ff : 0000:01:00.0

    /proc/iomem
    00000000-0009f7ff : System RAM
    0009f800-0009ffff : reserved
    000a0000-000bffff : Video RAM area
    000c0000-000cefff : Video ROM
    000cf000-000cffff : Adapter ROM
    000d0000-000d0fff : Adapter ROM
    000f0000-000fffff : System ROM
    00100000-1feeffff : System RAM
      00100000-002aff37 : Kernel code
      002aff38-003993e1 : Kernel data
    1fef0000-1fefafff : ACPI Tables
    1fefb000-1fefffff : ACPI Non-volatile Storage
    1ff00000-1fffffff : reserved
    20000000-20000fff : 0000:00:0b.0
    20001000-20001fff : 0000:00:0b.1
    d0000000-d000ffff : 0000:00:0a.0
    d0010000-d00107ff : 0000:00:0b.2
      d0010000-d00107ff : ohci1394
    d0010800-d00108ff : 0000:00:10.3
      d0010800-d00108ff : ehci_hcd
    d0020000-d002ffff : 0000:00:0c.0
      d0020000-d002ffff : tg3
    d0100000-d01fffff : PCI Bus #01
      d0100000-d010ffff : 0000:01:00.0
    d8000000-dfffffff : PCI Bus #01
      d8000000-dfffffff : 0000:01:00.0
    e0000000-efffffff : 0000:00:00.0
    fffe0000-ffffffff : reserved

    PCI information:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800
    AGP] Host Bridge (rev 01)
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort+ >SERR- <PERR-
            Latency: 64
            Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
            Capabilities: [80] AGP version 3.5
                    Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
                    Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x2
            Capabilities: [c0] #08 [0060]
            Capabilities: [68] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
            Capabilities: [58] #08 [8001]

    00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800
    South] (prog-if 00 [Normal decode])
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 0
            Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
            I/O behind bridge: 00002000-00002fff
            Memory behind bridge: d0100000-d01fffff
            Prefetchable memory behind bridge: d8000000-dfffffff
            BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:0a.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg
    NIC (rev 01)
            Subsystem: AMBIT Microsystem Corp.: Unknown device 0404
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Interrupt: pin A routed to IRQ 10
            Region 0: Memory at d0000000 (32-bit, non-prefetchable) [disabled]
    [size=64K]
            Capabilities: [44] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=2 PME-

    00:0b.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 0
            Interrupt: pin A routed to IRQ 10
            Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
            Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
            Memory window 0: 00000000-00000000 (prefetchable)
            Memory window 1: 00000000-00000000 (prefetchable)
            I/O window 0: 00000000-00000003
            I/O window 1: 00000000-00000003
            BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
            16-bit legacy interface ports at 0001

    00:0b.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Interrupt: pin B routed to IRQ 11
            Region 0: Memory at 20001000 (32-bit, non-prefetchable) [disabled]
    [size=4K]
            Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
            Memory window 0: 00000000-00000000 [disabled] (prefetchable)
            Memory window 1: 00000000-00000000 [disabled] (prefetchable)
            I/O window 0: 00000000-00000003 [disabled]
            I/O window 1: 00000000-00000003 [disabled]
            BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
            16-bit legacy interface ports at 0001

    00:0b.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
    (rev 02) (prog-if 10 [OHCI])
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 64 (500ns min, 1000ns max)
            Interrupt: pin C routed to IRQ 10
            Region 0: Memory at d0010000 (32-bit, non-prefetchable) [size=2K]
            Capabilities: [dc] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0+,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=2 PME+

    00:0c.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M
    Gigabit Ethernet (rev 03)
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 64 (16000ns min), cache line size 10
            Interrupt: pin A routed to IRQ 9
            Region 0: Memory at d0020000 (64-bit, non-prefetchable) [size=64K]
            Expansion ROM at <unassigned> [disabled] [size=64K]
            Capabilities: [48] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=1 PME-
            Capabilities: [50] Vital Product Data
            Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3
    Enable-
                    Address: fffbebfe7fffbc9c Data: fdfe

    00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
    (rev 80) (prog-if 00 [UHCI])
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 64, cache line size 10
            Interrupt: pin A routed to IRQ 9
            Region 4: I/O ports at 1020 [size=32]
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    PME(D0+,D1+,D2+,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
    (rev 80) (prog-if 00 [UHCI])
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 64, cache line size 10
            Interrupt: pin B routed to IRQ 10
            Region 4: I/O ports at 1040 [size=32]
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    PME(D0+,D1+,D2+,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME+

    00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
    (rev 80) (prog-if 00 [UHCI])
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 64, cache line size 10
            Interrupt: pin C routed to IRQ 11
            Region 4: I/O ports at 1060 [size=32]
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    PME(D0+,D1+,D2+,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if
    20 [EHCI])
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 64, cache line size 10
            Interrupt: pin D routed to IRQ 10
            Region 0: Memory at d0010800 (32-bit, non-prefetchable) [size=256]
            Capabilities: [80] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
    PME(D0+,D1+,D2+,D3hot+,D3cold+)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME+

    00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping+ SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 0
            Capabilities: [c0] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:11.1 IDE interface: VIA Technologies, Inc.
    VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
    (prog-if 8a [Master SecP PriP])
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 64
            Interrupt: pin A routed to IRQ 9
            Region 4: I/O ports at 1000 [size=16]
            Capabilities: [c0] Power Management version 2
                    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:11.5 Multimedia audio controller: VIA Technologies, Inc.
    VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Interrupt: pin C routed to IRQ 11
            Region 0: I/O ports at 1400 [size=256]
            Capabilities: [c0] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97
    Modem] (rev 80)
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Interrupt: pin C routed to IRQ 11
            Region 0: I/O ports at 1800 [size=256]
            Capabilities: [d0] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Capabilities: [80] #08 [2101]

    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-

    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-

    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
            Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B-
            Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-

    01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
    Radeon 9600 M10] (prog-if 00 [VGA])
            Subsystem: Acer Incorporated [ALI]: Unknown device 0046
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
    ParErr- Stepping- SERR- FastB2B+
            Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
            Latency: 66 (2000ns min), cache line size 10
            Interrupt: pin A routed to IRQ 9
            Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
            Region 1: I/O ports at 2000 [size=256]
            Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
            Expansion ROM at <unassigned> [disabled] [size=128K]
            Capabilities: [58] AGP version 3.0
                    Status: RQ=255 SBA+ 64bit- FW+ Rate=x1,x2
                    Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
            Capabilities: [50] Power Management version 2
                    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
                    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/


  • Next message: Mihai Rusu: "Re: Status field in ps output for threaded programs in 2.6 kernel"

    Relevant Pages