Linux version 2.6.7-mm1 (mknoblau@mkn5833l1) (gcc version 3.3.3 (SuSE Linux)) #7 Mon Jun 21 16:07:13 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff73c00 (ACPI data) BIOS-e820: 000000001ff73c00 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130912 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126816 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6610 ACPI: RSDT (v001 PTLTD EBRSDT 0x02410000 LTP 0x00000000) @ 0x1ff682e4 ACPI: FADT (v001 QUANTA EBmador 0x02410000 RT2 0x00000001) @ 0x1ff73b64 ACPI: BOOT (v001 PTLTD EBBFTBL$ 0x02410000 LTP 0x00000001) @ 0x1ff73bd8 ACPI: DSDT (v001 HP-MCD EB DSDT 0x02410000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Built 1 zonelists LENB: !cpu_has_apic LENB: NOT reenabling LAPIC No local APIC present or hardware disabled Initializing CPU#0 Kernel command line: auto BOOT_IMAGE=linux-2.6.x ro root=307 resume=/dev/hda6 splash=silent desktop CPU 0 irqstacks, hard=c0463000 soft=c0462000 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1129.651 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 513176k/523648k available (2056k kernel code, 9708k reserved, 1187k data, 208k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2236.41 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) III Mobile CPU 1133MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1057k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI-0179: *** Warning: The ACPI AML in your computer contains errors, please nag the manufacturer to correct it. ACPI-0182: *** Warning: Allowing relaxed access to fields; turn on CONFIG_ACPI_DEBUG for details. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs *10) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6) ACPI: PCI Interrupt Link [LNKD] (IRQs *10) ACPI: PCI Interrupt Link [LNKE] (IRQs *10) ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled. ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 28) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10 vesafb: framebuffer at 0xd8000000, mapped to 0xe0811000, size 4608k vesafb: mode is 1024x768x24, linelength=3072, pages=6 vesafb: protected mode interface info at c000:5243 vesafb: scrolling: redraw vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0 fb0: VESA VGA frame buffer device Simple Boot Flag at 0x36 set to 0x1 Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1087835326.282:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Console: switching to colour frame buffer device 128x48 Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 5 (level, low) -> IRQ 5 ICH3M: chipset revision 1 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:pio, hdd:pio hda: IC25N030ATCS04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: UJDA340, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58605120 sectors (30005 MB) w/1768KiB Cache, CHS=58140/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > ide-floppy driver 0.99.newide serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 5.8 180 degree mounted touchpad Sensor: 27 new absolute packet format Touchpad has extended capability bits -> four buttons -> multifinger detection -> palm detection -> pass-through port input: SynPS/2 Synaptics TouchPad on isa0060/serio1 serio: Synaptics pass-through port at isa0060/serio1/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 input: PC Speaker md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 Resume Machine: resuming from /dev/hda6 Resuming from device hda6 Resume Machine: This is normal swap space PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 208k freed Adding 529160k swap on /dev/hda6. Priority:42 extents:1 SCSI subsystem initialized md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names usbcore: registered new driver usbfs usbcore: registered new driver hub Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 10 (level, low) -> IRQ 10 Yenta: CardBus bridge found at 0000:02:05.0 [103c:001a] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:05.0, mfunc 0x012c1272, devctl 0x66 Yenta: ISA IRQ mask 0x0898, PCI irq 10 Socket status: 30000010 ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 10 (level, low) -> IRQ 10 Yenta: CardBus bridge found at 0000:02:05.1 [103c:001a] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:05.1, mfunc 0x012c1272, devctl 0x66 Yenta: ISA IRQ mask 0x0898, PCI irq 10 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0820-0x08ff: clean. cs: IO port probe 0x0800-0x080f: clean. cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0100-0x03af: excluding 0x378-0x37f cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 avma1_cs: testing i/o 0x140-0x147 avma1_cs: checking at i/o 0x140, irq 3 HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: AVM A1 PCMCIA driver Rev. 2.9.2.5 AVM A1 PCMCIA: io 0x140 irq 3 model 1 version 2 AVM A1 PCMCIA: ISAC version (0): 2086/2186 V1.1 AVM A1 PCMCIA: HSCX version A: V2.1 B: V2.1 AVM A1 (PCMCIA): IRQ 3 count 2 AVM A1 (PCMCIA): IRQ 3 count 5 HiSax: DSS1 Rev. 2.32.2.3 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added HiSax: if_command 6 called with invalid driverId 0! HiSax: if_command 6 called with invalid driverId 0! HiSax: debugging flags card 1 set to 4 hw_random hardware driver 1.0.0 loaded ippp, open, slot: 0, minor: 1, state: 0000 ippp_ccp: allocated reset data structure ddd43800 e100: Intel(R) PRO/100 Network Driver, 3.0.22-NAPI e100: Copyright(c) 1999-2004 Intel Corporation ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10 e100: eth0: e100_probe: addr 0xd0200000, irq 10, MAC addr 00:C0:9F:09:0D:6A Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 830M Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0xe0000000 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex NET: Registered protocol family 17 USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1) PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 10, io base 00001800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb 1-2: new low speed USB device using address 2 vmmon: module license 'unspecified' taints kernel. /dev/vmmon: VMMON CPUID: Unrecognized CPU /dev/vmmon: Module vmmon: registered with major=10 minor=165 /dev/vmmon: Module vmmon: initialized parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected /dev/vmnet: open called by PID 2619 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 2640 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 2639 (vmnet-netifup) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 2633 (vmnet-natd) /dev/vmnet: port on hub 8 successfully opened usbcore: registered new driver hiddev input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver nfs warning: mount version older than kernel nfs warning: mount version older than kernel /dev/vmnet: open called by PID 2723 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 2722 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened IA-32 Microcode Update Driver: v1.13 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) microcode: CPU0 already at revision 0x1d (current=0x1d) microcode: No suitable data for cpu 0 ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLP] ACPI: Fan [FAN] (off) ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THRM] (57 C) NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver IA-32 Microcode Update Driver v1.13 unregistered PCI: Enabling device 0000:02:03.0 (0000 -> 0001) ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 5 (level, low) -> IRQ 5 eth0: no IPv6 routers present vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present Non-volatile memory driver v1.2 hdc: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 BIOS EDD facility v0.15 2004-May-17, 1 devices found end_request: I/O error, dev fd0, sector 0 lp0: using parport0 (polling). mtrr: 0xd8000000,0x1000000 overlaps existing 0xd8000000,0x400000