Re: High CPU usage for disk I/O while DMA is enabled

From: Nesimi Buelbuel (nesimi.buelbuel_at_gmx.de)
Date: 07/25/04

  • Next message: Francois Romieu: "Re: via-velocity problem"
    Date:	Sun, 25 Jul 2004 18:28:07 +0200
    To: linux-kernel@vger.kernel.org
    
    

    Rafael Pereira <gotrooted@pop.com.br> wrote:

    > What is your motherboard ???
    > You must enable in .config the right IDE busmaster for your mobo.

    It is a K7S5A Pro with a SiS 735 Chipset.
    I have set the option for my motherboard, otherwise I couldnt even start
    my system.

    CONFIG_BLK_DEV_SIS5513=y

    The configuration of the Kernel is nearly the same in the 2.6.7
    as it was in my old 2.4.26 Kernel, where everything runs fine.

    <snip>
    gasmaske:~# lspci
    0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
    0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
    0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
    0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
    0000:00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
    0000:00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
    0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
    0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
    0000:00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
    0000:00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
    0000:00:0f.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 43)
    0000:00:13.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
    0000:00:13.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
    0000:00:13.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
    0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)

    gasmaske:~# dmesg
    Linux version 2.6.7 (root@gasmaske) (gcc version 3.3.4 (Debian 1:3.3.4-3)) #8 Wed Jul 21 20:31:03 CEST 2004
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
     BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
     BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
     BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
     BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
     BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
     BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    511MB LOWMEM available.
    On node 0 totalpages: 131056
      DMA zone: 4096 pages, LIFO batch:1
      Normal zone: 126960 pages, LIFO batch:16
      HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 AMI ) @ 0x000fa340
    ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000
    ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0030
    ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000
    Built 1 zonelists
    Kernel command line: auto BOOT_IMAGE=Linux ro root=302
    Initializing CPU#0
    PID hash table entries: 2048 (order 11: 16384 bytes)
    Detected 1394.318 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Memory: 515140k/524224k available (2542k kernel code, 8320k reserved, 990k data, 160k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 2760.70 BogoMIPS
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000
    CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 256K (64 bytes/line)
    CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: AMD Athlon(tm) XP 1600+ stepping 02
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    SCSI subsystem initialized
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    Uncovering SIS18 that hid as a SIS503 (compatible=1)
    Enabling SiS 96x SMBus.
    PCI: Using IRQ router SIS [1039/0018] at 0000:00:02.0
    PCI: IRQ 0 for device 0000:00:02.1 doesn't match PIRQ mask - try pci=usepirqmask
    PCI: Found IRQ 11 for device 0000:00:02.1
    PCI: Sharing IRQ 11 with 0000:00:13.1
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    udf: registering filesystem
    lp: driver loaded but no devices found
    Real Time Clock Driver v1.12
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected SiS 735 chipset
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: AGP aperture is 64M @ 0xd0000000
    parport0: PC-style at 0x378 [PCSPP(,...)]
    lp0: using parport0 (polling).
    lp0: console ready
    Using anticipatory io scheduler
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: loaded (max 8 devices)
    nbd: registered device at major 43
    via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
    PCI: Found IRQ 12 for device 0000:00:0f.0
    PCI: Sharing IRQ 12 with 0000:00:02.2
    eth0: VIA VT6102 Rhine-II at 0xcc00, 00:50:ba:12:7f:25, IRQ 12.
    eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1.
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    SIS5513: IDE controller at PCI slot 0000:00:02.5
    SIS5513: chipset revision 208
    SIS5513: not 100% native mode: will probe irqs later
    SIS5513: SiS735 ATA 100 (2nd gen) controller
        ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
        ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
    hda: Maxtor 6Y160P0, ATA DISK drive
    hdb: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hdc: IC35L080AVVA07-0, ATA DISK drive
    hdd: Maxtor 6Y080L0, ATA DISK drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 1024KiB
    hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(33)
     hda: hda1 hda2 hda3
    hdc: max request size: 128KiB
    hdc: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(33)
     hdc: hdc1
    hdd: max request size: 128KiB
    hdd: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
     hdd: hdd1 < >
    hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    PCI: Found IRQ 5 for device 0000:00:13.2
    PCI: Sharing IRQ 5 with 0000:00:02.7
    PCI: Sharing IRQ 5 with 0000:00:0d.0
    ehci_hcd 0000:00:13.2: VIA Technologies, Inc. USB 2.0
    ehci_hcd 0000:00:13.2: irq 5, pci mem e087de00
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ohci_hcd: block sizes: ed 64 td 64
    PCI: Found IRQ 12 for device 0000:00:02.2
    PCI: Sharing IRQ 12 with 0000:00:0f.0
    ohci_hcd 0000:00:02.2: Silicon Integrated Systems [SiS] USB 1.0 Controller
    ohci_hcd 0000:00:02.2: irq 12, pci mem e087f000
    ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    PCI: Found IRQ 12 for device 0000:00:02.3
    ohci_hcd 0000:00:02.3: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
    ohci_hcd 0000:00:02.3: irq 12, pci mem e0881000
    ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 3
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 3 ports detected
    USB Universal Host Controller Interface driver v2.2
    PCI: Found IRQ 11 for device 0000:00:13.0
    uhci_hcd 0000:00:13.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    uhci_hcd 0000:00:13.0: irq 11, io base 0000c400
    uhci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    PCI: Found IRQ 11 for device 0000:00:13.1
    PCI: Sharing IRQ 11 with 0000:00:02.1
    uhci_hcd 0000:00:13.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
    uhci_hcd 0000:00:13.1: irq 11, io base 0000c800
    uhci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 5
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    Initializing USB Mass Storage driver...
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    mice: PS/2 mouse device common for all mice
    serio: i8042 KBD port at 0x60,0x64 irq 1
    input: AT Translated Set 2 keyboard on isa0060/serio0
    Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
    PCI: Found IRQ 5 for device 0000:00:0d.0
    PCI: Sharing IRQ 5 with 0000:00:02.7
    PCI: Sharing IRQ 5 with 0000:00:13.2
    ALSA device list:
      #0: C-Media PCI CMI8738-MC6 (model 55) at 0xd000, irq 5
    NET: Registered protocol family 2
    IP: routing cache hash table of 4096 buckets, 32Kbytes
    TCP: Hash tables configured (established 32768 bind 65536)
    IPv4 over IPv4 tunneling driver
    GRE over IPv4 tunneling driver
    ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack
    ip_tables: (C) 2000-2002 Netfilter core team
    ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
    arp_tables: (C) 2002 David S. Miller
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 160k freed
    usb 4-1: new low speed USB device using address 2
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
    Adding 586332k swap on /dev/hda1. Priority:-1 extents:1
    EXT3 FS on hda2, internal journal
    kjournald starting. Commit interval 5 seconds
    [...]
    </snip>

    Any hints appreciatet :)

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/


  • Next message: Francois Romieu: "Re: via-velocity problem"

    Relevant Pages