[PATCH] [2.4.28-pre1] more gcc3.4 inline fixes [7/10]

• Previous message: Christoph Hellwig: "Re: Merge I2O patches from -mm"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Date:	Tue, 17 Aug 2004 18:16:15 +0300
To: linux-kernel@vger.kernel.org

--- 28p1/drivers/scsi/sim710.c~ 2002-08-03 03:39:44.000000000 +0300
+++ 28p1/drivers/scsi/sim710.c 2004-08-16 23:55:56.000000000 +0300
@@ -921,172 +921,6 @@
 }
 
 
-/* A quick wrapper for sim710_intr_handle to grab the spin lock */
-
-static void
-do_sim710_intr_handle(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&io_request_lock, flags);
- sim710_intr_handle(irq, dev_id, regs);
- spin_unlock_irqrestore(&io_request_lock, flags);
-}
-
-
-/* A "high" level interrupt handler */
-
-static void
-sim710_intr_handle(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct Scsi_Host * host = (struct Scsi_Host *)dev_id;
- struct sim710_hostdata *hostdata = (struct sim710_hostdata *)host->hostdata[0];
- Scsi_Cmnd * cmd;
- unsigned char istat, dstat;
- unsigned char sstat0;
- u32 scratch, dsps, resume_offset = 0;
-
- istat = NCR_read8(ISTAT_REG);
- if (!(istat & (ISTAT_SIP|ISTAT_DIP)))
- return;
- else {
- sim710_intrs++;
- dsps = NCR_read32(DSPS_REG);
- hostdata->state = STATE_HALTED;
- sstat0 = dstat = 0;
- scratch = NCR_read32(SCRATCH_REG);
- if (istat & ISTAT_SIP) {
- sstat0 = NCR_read8(SSTAT0_REG);
- }
- if (istat & ISTAT_DIP) {
- udelay(10); /* Some comment somewhere about 10cycles
- * between accesses to sstat0 and dstat ??? */
- dstat = NCR_read8(DSTAT_REG);
- }
- DEB(DEB_INTS, printk("scsi%d: Int %d, istat %02x, sstat0 %02x "
- "dstat %02x, dsp [%04x], scratch %02x\n",
- host->host_no, sim710_intrs, istat, sstat0, dstat,
- (u32 *)(bus_to_virt(NCR_read32(DSP_REG))) - hostdata->script,
- scratch));
- if (scratch & 0x100) {
- u8 *p = hostdata->msgin_buf;
-
- DEB(DEB_INTS, printk(" msgin_buf: %02x %02x %02x %02x\n",
- p[0], p[1], p[2], p[3]));
- }
- if ((dstat & DSTAT_SIR) && dsps == A_int_reselected) {
- /* Reselected. Identify the target from LCRC_REG, and
- * update current command. If we were trying to select
- * a device, then that command needs to go back on the
- * issue_queue for later.
- */
- unsigned char lcrc = NCR_read8(LCRC_REG_10);
- int id = 0;
-
- if (!(lcrc & 0x7f)) {
- printk("scsi%d: Reselected with LCRC = %02x\n",
- host->host_no, lcrc);
- cmd = NULL;
- }
- else {
- while (!(lcrc & 1)) {
- id++;
- lcrc >>= 1;
- }
- DEB(DEB_DISC, printk("scsi%d: Reselected by ID %d\n",
- host->host_no, id));
- if (hostdata->running) {
- /* Clear SIGP */
- (void)NCR_read8(CTEST2_REG_700);
-
- DEB(DEB_DISC, printk("scsi%d: Select of %d interrupted "
- "by reselect from %d (%p)\n",
- host->host_no, hostdata->running->target,
- id, hostdata->target[id].cur_cmd));
- cmd = hostdata->running;
- hostdata->target[cmd->target].cur_cmd = NULL;
- cmd->SCp.ptr = (unsigned char *) hostdata->issue_queue;
- hostdata->issue_queue = cmd;
- }
- cmd = hostdata->running = hostdata->target[id].cur_cmd;
- }
- }
- else
- cmd = hostdata->running;
-
- if (!cmd) {
- printk("scsi%d: No active command!\n", host->host_no);
- printk("scsi%d: Int %d, istat %02x, sstat0 %02x "
- "dstat %02x, dsp [%04x], scratch %02x, dsps %08x\n",
- host->host_no, sim710_intrs, istat, sstat0, dstat,
- (u32 *)(bus_to_virt(NCR_read32(DSP_REG))) - hostdata->script,
- NCR_read32(SCRATCH_REG), dsps);
- /* resume_offset is zero, which will cause a host reset */
- }
- else if (sstat0 & SSTAT0_700_STO) {
- DEB(DEB_TOUT, printk("scsi%d: Selection timeout\n", host->host_no));
- cmd->result = DID_NO_CONNECT << 16;
- SCSI_DONE(cmd);
- hostdata->target[cmd->target].cur_cmd = NULL;
- resume_offset = Ent_reselect;
- }
- else if (sstat0 & (SSTAT0_SGE|SSTAT0_UDC|SSTAT0_RST|SSTAT0_PAR)) {
- printk("scsi%d: Serious error, sstat0 = %02x\n", host->host_no,
- sstat0);
- sim710_errors++;
- /* resume_offset is zero, which will cause a host reset */
- }
- else if (dstat & (DSTAT_BF|DSTAT_ABRT|DSTAT_SSI|DSTAT_WTD)) {
- printk("scsi%d: Serious error, dstat = %02x\n", host->host_no,
- dstat);
- sim710_errors++;
- /* resume_offset is zero, which will cause a host reset */
- }
- else if (dstat & DSTAT_SIR)
- resume_offset = handle_script_int(host, cmd);
- else if (sstat0 & SSTAT0_MA)
- resume_offset = handle_phase_mismatch(host, cmd);
- else if (dstat & DSTAT_IID) {
- /* This can be due to a quick reselect while doing a WAIT
- * DISCONNECT.
- */
- resume_offset = handle_idd(host, cmd);
- }
- else {
- sim710_errors++;
- printk("scsi%d: Spurious interrupt!\n", host->host_no);
- /* resume_offset is zero, which will cause a host reset */
- }
- }
-
- if (resume_offset) {
- if (resume_offset == Ent_reselect) {
- hostdata->running = NULL;
- hostdata->state = STATE_IDLE;
- }
- else
- hostdata->state = STATE_BUSY;
- DEB(DEB_RESUME, printk("scsi%d: Resuming at script[0x%x]\n",
- host->host_no, resume_offset/4));
-#ifdef DEBUG_LIMIT_INTS
- if (sim710_intrs < DEBUG_LIMIT_INTS)
-#endif
- {
- NCR_write32(SCRATCH_REG, 0);
- NCR_write32(DSP_REG, virt_to_bus(hostdata->script+resume_offset/4));
- }
- if (resume_offset == Ent_reselect)
- run_process_issue_queue(hostdata);
- }
- else {
- printk("scsi%d: Failed to handle interrupt. Failing commands "
- "and resetting SCSI bus and chip\n", host->host_no);
- mdelay(1000); /* Give chance to read screen!! */
- full_reset(host);
- }
-}
-
-
 static void
 run_command (struct sim710_hostdata *hostdata, Scsi_Cmnd *cmd)
 {
@@ -1284,6 +1118,172 @@
 }
 
 
+/* A quick wrapper for sim710_intr_handle to grab the spin lock */
+
+static void
+do_sim710_intr_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&io_request_lock, flags);
+ sim710_intr_handle(irq, dev_id, regs);
+ spin_unlock_irqrestore(&io_request_lock, flags);
+}
+
+
+/* A "high" level interrupt handler */
+
+static void
+sim710_intr_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct Scsi_Host * host = (struct Scsi_Host *)dev_id;
+ struct sim710_hostdata *hostdata = (struct sim710_hostdata *)host->hostdata[0];
+ Scsi_Cmnd * cmd;
+ unsigned char istat, dstat;
+ unsigned char sstat0;
+ u32 scratch, dsps, resume_offset = 0;
+
+ istat = NCR_read8(ISTAT_REG);
+ if (!(istat & (ISTAT_SIP|ISTAT_DIP)))
+ return;
+ else {
+ sim710_intrs++;
+ dsps = NCR_read32(DSPS_REG);
+ hostdata->state = STATE_HALTED;
+ sstat0 = dstat = 0;
+ scratch = NCR_read32(SCRATCH_REG);
+ if (istat & ISTAT_SIP) {
+ sstat0 = NCR_read8(SSTAT0_REG);
+ }
+ if (istat & ISTAT_DIP) {
+ udelay(10); /* Some comment somewhere about 10cycles
+ * between accesses to sstat0 and dstat ??? */
+ dstat = NCR_read8(DSTAT_REG);
+ }
+ DEB(DEB_INTS, printk("scsi%d: Int %d, istat %02x, sstat0 %02x "
+ "dstat %02x, dsp [%04x], scratch %02x\n",
+ host->host_no, sim710_intrs, istat, sstat0, dstat,
+ (u32 *)(bus_to_virt(NCR_read32(DSP_REG))) - hostdata->script,
+ scratch));
+ if (scratch & 0x100) {
+ u8 *p = hostdata->msgin_buf;
+
+ DEB(DEB_INTS, printk(" msgin_buf: %02x %02x %02x %02x\n",
+ p[0], p[1], p[2], p[3]));
+ }
+ if ((dstat & DSTAT_SIR) && dsps == A_int_reselected) {
+ /* Reselected. Identify the target from LCRC_REG, and
+ * update current command. If we were trying to select
+ * a device, then that command needs to go back on the
+ * issue_queue for later.
+ */
+ unsigned char lcrc = NCR_read8(LCRC_REG_10);
+ int id = 0;
+
+ if (!(lcrc & 0x7f)) {
+ printk("scsi%d: Reselected with LCRC = %02x\n",
+ host->host_no, lcrc);
+ cmd = NULL;
+ }
+ else {
+ while (!(lcrc & 1)) {
+ id++;
+ lcrc >>= 1;
+ }
+ DEB(DEB_DISC, printk("scsi%d: Reselected by ID %d\n",
+ host->host_no, id));
+ if (hostdata->running) {
+ /* Clear SIGP */
+ (void)NCR_read8(CTEST2_REG_700);
+
+ DEB(DEB_DISC, printk("scsi%d: Select of %d interrupted "
+ "by reselect from %d (%p)\n",
+ host->host_no, hostdata->running->target,
+ id, hostdata->target[id].cur_cmd));
+ cmd = hostdata->running;
+ hostdata->target[cmd->target].cur_cmd = NULL;
+ cmd->SCp.ptr = (unsigned char *) hostdata->issue_queue;
+ hostdata->issue_queue = cmd;
+ }
+ cmd = hostdata->running = hostdata->target[id].cur_cmd;
+ }
+ }
+ else
+ cmd = hostdata->running;
+
+ if (!cmd) {
+ printk("scsi%d: No active command!\n", host->host_no);
+ printk("scsi%d: Int %d, istat %02x, sstat0 %02x "
+ "dstat %02x, dsp [%04x], scratch %02x, dsps %08x\n",
+ host->host_no, sim710_intrs, istat, sstat0, dstat,
+ (u32 *)(bus_to_virt(NCR_read32(DSP_REG))) - hostdata->script,
+ NCR_read32(SCRATCH_REG), dsps);
+ /* resume_offset is zero, which will cause a host reset */
+ }
+ else if (sstat0 & SSTAT0_700_STO) {
+ DEB(DEB_TOUT, printk("scsi%d: Selection timeout\n", host->host_no));
+ cmd->result = DID_NO_CONNECT << 16;
+ SCSI_DONE(cmd);
+ hostdata->target[cmd->target].cur_cmd = NULL;
+ resume_offset = Ent_reselect;
+ }
+ else if (sstat0 & (SSTAT0_SGE|SSTAT0_UDC|SSTAT0_RST|SSTAT0_PAR)) {
+ printk("scsi%d: Serious error, sstat0 = %02x\n", host->host_no,
+ sstat0);
+ sim710_errors++;
+ /* resume_offset is zero, which will cause a host reset */
+ }
+ else if (dstat & (DSTAT_BF|DSTAT_ABRT|DSTAT_SSI|DSTAT_WTD)) {
+ printk("scsi%d: Serious error, dstat = %02x\n", host->host_no,
+ dstat);
+ sim710_errors++;
+ /* resume_offset is zero, which will cause a host reset */
+ }
+ else if (dstat & DSTAT_SIR)
+ resume_offset = handle_script_int(host, cmd);
+ else if (sstat0 & SSTAT0_MA)
+ resume_offset = handle_phase_mismatch(host, cmd);
+ else if (dstat & DSTAT_IID) {
+ /* This can be due to a quick reselect while doing a WAIT
+ * DISCONNECT.
+ */
+ resume_offset = handle_idd(host, cmd);
+ }
+ else {
+ sim710_errors++;
+ printk("scsi%d: Spurious interrupt!\n", host->host_no);
+ /* resume_offset is zero, which will cause a host reset */
+ }
+ }
+
+ if (resume_offset) {
+ if (resume_offset == Ent_reselect) {
+ hostdata->running = NULL;
+ hostdata->state = STATE_IDLE;
+ }
+ else
+ hostdata->state = STATE_BUSY;
+ DEB(DEB_RESUME, printk("scsi%d: Resuming at script[0x%x]\n",
+ host->host_no, resume_offset/4));
+#ifdef DEBUG_LIMIT_INTS
+ if (sim710_intrs < DEBUG_LIMIT_INTS)
+#endif
+ {
+ NCR_write32(SCRATCH_REG, 0);
+ NCR_write32(DSP_REG, virt_to_bus(hostdata->script+resume_offset/4));
+ }
+ if (resume_offset == Ent_reselect)
+ run_process_issue_queue(hostdata);
+ }
+ else {
+ printk("scsi%d: Failed to handle interrupt. Failing commands "
+ "and resetting SCSI bus and chip\n", host->host_no);
+ mdelay(1000); /* Give chance to read screen!! */
+ full_reset(host);
+ }
+}
+
+
 int
 sim710_queuecommand(Scsi_Cmnd * cmd, void (*done)(Scsi_Cmnd *))
 {
--- 28p1/drivers/scsi/ips.c~ 2004-08-08 02:26:05.000000000 +0300
+++ 28p1/drivers/scsi/ips.c 2004-08-17 00:09:52.000000000 +0300
@@ -802,6 +802,168 @@
 
 /****************************************************************************/
 /* */
+/* Routine Name: ips_removeq_copp_head */
+/* */
+/* Routine Description: */
+/* */
+/* Remove the head of the queue */
+/* */
+/* ASSUMED to be called from within the HA lock */
+/* */
+/****************************************************************************/
+static inline ips_copp_wait_item_t *
+ips_removeq_copp_head(ips_copp_queue_t * queue)
+{
+ ips_copp_wait_item_t *item;
+
+ METHOD_TRACE("ips_removeq_copp_head", 1);
+
+ item = queue->head;
+
+ if (!item) {
+ return (NULL);
+ }
+
+ queue->head = item->next;
+ item->next = NULL;
+
+ if (queue->tail == item)
+ queue->tail = NULL;
+
+ queue->count--;
+
+ return (item);
+}
+
+/****************************************************************************/
+/* */
+/* Routine Name: ips_removeq_copp */
+/* */
+/* Routine Description: */
+/* */
+/* Remove an item from a queue */
+/* */
+/* ASSUMED to be called from within the HA lock */
+/* */
+/****************************************************************************/
+static inline ips_copp_wait_item_t *
+ips_removeq_copp(ips_copp_queue_t * queue, ips_copp_wait_item_t * item)
+{
+ ips_copp_wait_item_t *p;
+
+ METHOD_TRACE("ips_removeq_copp", 1);
+
+ if (!item)
+ return (NULL);
+
+ if (item == queue->head) {
+ return (ips_removeq_copp_head(queue));
+ }
+
+ p = queue->head;
+
+ while ((p) && (item != p->next))
+ p = p->next;
+
+ if (p) {
+ /* found a match */
+ p->next = item->next;
+
+ if (!item->next)
+ queue->tail = p;
+
+ item->next = NULL;
+ queue->count--;
+
+ return (item);
+ }
+
+ return (NULL);
+}
+
+/****************************************************************************/
+/* */
+/* Routine Name: ips_removeq_wait_head */
+/* */
+/* Routine Description: */
+/* */
+/* Remove the head of the queue */
+/* */
+/* ASSUMED to be called from within the HA lock */
+/* */
+/****************************************************************************/
+static inline Scsi_Cmnd *
+ips_removeq_wait_head(ips_wait_queue_t * queue)
+{
+ Scsi_Cmnd *item;
+
+ METHOD_TRACE("ips_removeq_wait_head", 1);
+
+ item = queue->head;
+
+ if (!item) {
+ return (NULL);
+ }
+
+ queue->head = (Scsi_Cmnd *) item->host_scribble;
+ item->host_scribble = NULL;
+
+ if (queue->tail == item)
+ queue->tail = NULL;
+
+ queue->count--;
+
+ return (item);
+}
+
+/****************************************************************************/
+/* */
+/* Routine Name: ips_removeq_wait */
+/* */
+/* Routine Description: */
+/* */
+/* Remove an item from a queue */
+/* */
+/* ASSUMED to be called from within the HA lock */
+/* */
+/****************************************************************************/
+static inline Scsi_Cmnd *
+ips_removeq_wait(ips_wait_queue_t * queue, Scsi_Cmnd * item)
+{
+ Scsi_Cmnd *p;
+
+ METHOD_TRACE("ips_removeq_wait", 1);
+
+ if (!item)
+ return (NULL);
+
+ if (item == queue->head) {
+ return (ips_removeq_wait_head(queue));
+ }
+
+ p = queue->head;
+
+ while ((p) && (item != (Scsi_Cmnd *) p->host_scribble))
+ p = (Scsi_Cmnd *) p->host_scribble;
+
+ if (p) {
+ /* found a match */
+ p->host_scribble = item->host_scribble;
+
+ if (!item->host_scribble)
+ queue->tail = p;
+
+ item->host_scribble = NULL;
+ queue->count--;
+
+ return (item);
+ }
+
+ return (NULL);
+}
+
+/****************************************************************************/
+/* */
 /* Routine Name: ips_eh_abort */
 /* */
 /* Routine Description: */
@@ -859,6 +1021,87 @@
 
 /****************************************************************************/
 /* */
+/* Routine Name: ips_removeq_scb_head */
+/* */
+/* Routine Description: */
+/* */
+/* Remove the head of the queue */
+/* */
+/* ASSUMED to be called from within the HA lock */
+/* */
+/****************************************************************************/
+static inline ips_scb_t *
+ips_removeq_scb_head(ips_scb_queue_t * queue)
+{
+ ips_scb_t *item;
+
+ METHOD_TRACE("ips_removeq_scb_head", 1);
+
+ item = queue->head;
+
+ if (!item) {
+ return (NULL);
+ }
+
+ queue->head = item->q_next;
+ item->q_next = NULL;
+
+ if (queue->tail == item)
+ queue->tail = NULL;
+
+ queue->count--;
+
+ return (item);
+}
+
+/****************************************************************************/
+/* */
+/* Routine Name: ips_removeq_scb */
+/* */
+/* Routine Description: */
+/* */
+/* Remove an item from a queue */
+/* */
+/* ASSUMED to be called from within the HA lock */
+/* */
+/****************************************************************************/
+static inline ips_scb_t *
+ips_removeq_scb(ips_scb_queue_t * queue, ips_scb_t * item)
+{
+ ips_scb_t *p;
+
+ METHOD_TRACE("ips_removeq_scb", 1);
+
+ if (!item)
+ return (NULL);
+
+ if (item == queue->head) {
+ return (ips_removeq_scb_head(queue));
+ }
+
+ p = queue->head;
+
+ while ((p) && (item != p->q_next))
+ p = p->q_next;
+
+ if (p) {
+ /* found a match */
+ p->q_next = item->q_next;
+
+ if (!item->q_next)
+ queue->tail = p;
+
+ item->q_next = NULL;
+ queue->count--;
+
+ return (item);
+ }
+
+ return (NULL);
+}
+
+/****************************************************************************/
+/* */
 /* Routine Name: ips_eh_reset */
 /* */
 /* Routine Description: */
@@ -1058,21 +1301,85 @@
 
 /****************************************************************************/
 /* */
-/* Routine Name: ips_queue */
+/* Routine Name: ips_putq_copp_tail */
 /* */
 /* Routine Description: */
 /* */
-/* Send a command to the controller */
+/* Add an item to the tail of the queue */
 /* */
-/* NOTE: */
-/* Linux obtains io_request_lock before calling this function */
+/* ASSUMED to be called from within the HA lock */
 /* */
 /****************************************************************************/
-int
-ips_queue(Scsi_Cmnd * SC, void (*done) (Scsi_Cmnd *))
+static inline void
+ips_putq_copp_tail(ips_copp_queue_t * queue, ips_copp_wait_item_t * item)
 {
- ips_ha_t *ha;
- ips_passthru_t *pt;
+ METHOD_TRACE("ips_putq_copp_tail", 1);
+
+ if (!item)
+ return;
+
+ item->next = NULL;
+
+ if (queue->tail)
+ queue->tail->next = item;
+
+ queue->tail = item;
+
+ if (!queue->head)
+ queue->head = item;
+
+ queue->count++;
+}
+
+/****************************************************************************/
+/* */
+/* Routine Name: ips_putq_wait_tail */
+/* */
+/* Routine Description: */
+/* */
+/* Add an item to the tail of the queue */
+/* */
+/* ASSUMED to be called from within the HA lock */
+/* */
+/****************************************************************************/
+static inline void
+ips_putq_wait_tail(ips_wait_queue_t * queue, Scsi_Cmnd * item)
+{
+ METHOD_TRACE("ips_putq_wait_tail", 1);
+
+ if (!item)
+ return;
+
+ item->host_scribble = NULL;
+
+ if (queue->tail)
+ queue->tail->host_scribble = (char *) item;
+
+ queue->tail = item;
+
+ if (!queue->head)
+ queue->head = item;
+
+ queue->count++;
+}
+
+/****************************************************************************/
+/* */
+/* Routine Name: ips_queue */
+/* */
+/* Routine Description: */
+/* */
+/* Send a command to the controller */
+/* */
+/* NOTE: */
+/* Linux obtains io_request_lock before calling this function */
+/* */
+/****************************************************************************/
+int
+ips_queue(Scsi_Cmnd * SC, void (*done) (Scsi_Cmnd *))
+{
+ ips_ha_t *ha;
+ ips_passthru_t *pt;
 
         METHOD_TRACE("ips_queue", 1);
 
@@ -2693,6 +3000,66 @@
 
 /****************************************************************************/
 /* */
+/* Routine Name: ips_putq_scb_head */
+/* */
+/* Routine Description: */
+/* */
+/* Add an item to the head of the queue */
+/* */
+/* ASSUMED to be called from within the HA lock */
+/* */
+/****************************************************************************/
+static inline void
+ips_putq_scb_head(ips_scb_queue_t * queue, ips_scb_t * item)
+{
+ METHOD_TRACE("ips_putq_scb_head", 1);
+
+ if (!item)
+ return;
+
+ item->q_next = queue->head;
+ queue->head = item;
+
+ if (!queue->tail)
+ queue->tail = item;
+
+ queue->count++;
+}
+
+/****************************************************************************/
+/* */
+/* Routine Name: ips_putq_scb_tail */
+/* */
+/* Routine Description: */
+/* */
+/* Add an item to the tail of the queue */
+/* */
+/* ASSUMED to be called from within the HA lock */
+/* */
+/****************************************************************************/
+static inline void
+ips_putq_scb_tail(ips_scb_queue_t * queue, ips_scb_t * item)
+{
+ METHOD_TRACE("ips_putq_scb_tail", 1);
+
+ if (!item)
+ return;
+
+ item->q_next = NULL;
+
+ if (queue->tail)
+ queue->tail->q_next = item;
+
+ queue->tail = item;
+
+ if (!queue->head)
+ queue->head = item;
+
+ queue->count++;
+}
+
+/****************************************************************************/
+/* */
 /* Routine Name: ips_next */
 /* */
 /* Routine Description: */
@@ -2944,147 +3311,6 @@
 
 /****************************************************************************/
 /* */
-/* Routine Name: ips_putq_scb_head */
-/* */
-/* Routine Description: */
-/* */
-/* Add an item to the head of the queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline void
-ips_putq_scb_head(ips_scb_queue_t * queue, ips_scb_t * item)
-{
- METHOD_TRACE("ips_putq_scb_head", 1);
-
- if (!item)
- return;
-
- item->q_next = queue->head;
- queue->head = item;
-
- if (!queue->tail)
- queue->tail = item;
-
- queue->count++;
-}
-
-/****************************************************************************/
-/* */
-/* Routine Name: ips_putq_scb_tail */
-/* */
-/* Routine Description: */
-/* */
-/* Add an item to the tail of the queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline void
-ips_putq_scb_tail(ips_scb_queue_t * queue, ips_scb_t * item)
-{
- METHOD_TRACE("ips_putq_scb_tail", 1);
-
- if (!item)
- return;
-
- item->q_next = NULL;
-
- if (queue->tail)
- queue->tail->q_next = item;
-
- queue->tail = item;
-
- if (!queue->head)
- queue->head = item;
-
- queue->count++;
-}
-
-/****************************************************************************/
-/* */
-/* Routine Name: ips_removeq_scb_head */
-/* */
-/* Routine Description: */
-/* */
-/* Remove the head of the queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline ips_scb_t *
-ips_removeq_scb_head(ips_scb_queue_t * queue)
-{
- ips_scb_t *item;
-
- METHOD_TRACE("ips_removeq_scb_head", 1);
-
- item = queue->head;
-
- if (!item) {
- return (NULL);
- }
-
- queue->head = item->q_next;
- item->q_next = NULL;
-
- if (queue->tail == item)
- queue->tail = NULL;
-
- queue->count--;
-
- return (item);
-}
-
-/****************************************************************************/
-/* */
-/* Routine Name: ips_removeq_scb */
-/* */
-/* Routine Description: */
-/* */
-/* Remove an item from a queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline ips_scb_t *
-ips_removeq_scb(ips_scb_queue_t * queue, ips_scb_t * item)
-{
- ips_scb_t *p;
-
- METHOD_TRACE("ips_removeq_scb", 1);
-
- if (!item)
- return (NULL);
-
- if (item == queue->head) {
- return (ips_removeq_scb_head(queue));
- }
-
- p = queue->head;
-
- while ((p) && (item != p->q_next))
- p = p->q_next;
-
- if (p) {
- /* found a match */
- p->q_next = item->q_next;
-
- if (!item->q_next)
- queue->tail = p;
-
- item->q_next = NULL;
- queue->count--;
-
- return (item);
- }
-
- return (NULL);
-}
-
-/****************************************************************************/
-/* */
 /* Routine Name: ips_putq_wait_head */
 /* */
 /* Routine Description: */
@@ -3113,119 +3339,6 @@
 
 /****************************************************************************/
 /* */
-/* Routine Name: ips_putq_wait_tail */
-/* */
-/* Routine Description: */
-/* */
-/* Add an item to the tail of the queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline void
-ips_putq_wait_tail(ips_wait_queue_t * queue, Scsi_Cmnd * item)
-{
- METHOD_TRACE("ips_putq_wait_tail", 1);
-
- if (!item)
- return;
-
- item->host_scribble = NULL;
-
- if (queue->tail)
- queue->tail->host_scribble = (char *) item;
-
- queue->tail = item;
-
- if (!queue->head)
- queue->head = item;
-
- queue->count++;
-}
-
-/****************************************************************************/
-/* */
-/* Routine Name: ips_removeq_wait_head */
-/* */
-/* Routine Description: */
-/* */
-/* Remove the head of the queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline Scsi_Cmnd *
-ips_removeq_wait_head(ips_wait_queue_t * queue)
-{
- Scsi_Cmnd *item;
-
- METHOD_TRACE("ips_removeq_wait_head", 1);
-
- item = queue->head;
-
- if (!item) {
- return (NULL);
- }
-
- queue->head = (Scsi_Cmnd *) item->host_scribble;
- item->host_scribble = NULL;
-
- if (queue->tail == item)
- queue->tail = NULL;
-
- queue->count--;
-
- return (item);
-}
-
-/****************************************************************************/
-/* */
-/* Routine Name: ips_removeq_wait */
-/* */
-/* Routine Description: */
-/* */
-/* Remove an item from a queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline Scsi_Cmnd *
-ips_removeq_wait(ips_wait_queue_t * queue, Scsi_Cmnd * item)
-{
- Scsi_Cmnd *p;
-
- METHOD_TRACE("ips_removeq_wait", 1);
-
- if (!item)
- return (NULL);
-
- if (item == queue->head) {
- return (ips_removeq_wait_head(queue));
- }
-
- p = queue->head;
-
- while ((p) && (item != (Scsi_Cmnd *) p->host_scribble))
- p = (Scsi_Cmnd *) p->host_scribble;
-
- if (p) {
- /* found a match */
- p->host_scribble = item->host_scribble;
-
- if (!item->host_scribble)
- queue->tail = p;
-
- item->host_scribble = NULL;
- queue->count--;
-
- return (item);
- }
-
- return (NULL);
-}
-
-/****************************************************************************/
-/* */
 /* Routine Name: ips_putq_copp_head */
 /* */
 /* Routine Description: */
@@ -3254,119 +3367,6 @@
 
 /****************************************************************************/
 /* */
-/* Routine Name: ips_putq_copp_tail */
-/* */
-/* Routine Description: */
-/* */
-/* Add an item to the tail of the queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline void
-ips_putq_copp_tail(ips_copp_queue_t * queue, ips_copp_wait_item_t * item)
-{
- METHOD_TRACE("ips_putq_copp_tail", 1);
-
- if (!item)
- return;
-
- item->next = NULL;
-
- if (queue->tail)
- queue->tail->next = item;
-
- queue->tail = item;
-
- if (!queue->head)
- queue->head = item;
-
- queue->count++;
-}
-
-/****************************************************************************/
-/* */
-/* Routine Name: ips_removeq_copp_head */
-/* */
-/* Routine Description: */
-/* */
-/* Remove the head of the queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline ips_copp_wait_item_t *
-ips_removeq_copp_head(ips_copp_queue_t * queue)
-{
- ips_copp_wait_item_t *item;
-
- METHOD_TRACE("ips_removeq_copp_head", 1);
-
- item = queue->head;
-
- if (!item) {
- return (NULL);
- }
-
- queue->head = item->next;
- item->next = NULL;
-
- if (queue->tail == item)
- queue->tail = NULL;
-
- queue->count--;
-
- return (item);
-}
-
-/****************************************************************************/
-/* */
-/* Routine Name: ips_removeq_copp */
-/* */
-/* Routine Description: */
-/* */
-/* Remove an item from a queue */
-/* */
-/* ASSUMED to be called from within the HA lock */
-/* */
-/****************************************************************************/
-static inline ips_copp_wait_item_t *
-ips_removeq_copp(ips_copp_queue_t * queue, ips_copp_wait_item_t * item)
-{
- ips_copp_wait_item_t *p;
-
- METHOD_TRACE("ips_removeq_copp", 1);
-
- if (!item)
- return (NULL);
-
- if (item == queue->head) {
- return (ips_removeq_copp_head(queue));
- }
-
- p = queue->head;
-
- while ((p) && (item != p->next))
- p = p->next;
-
- if (p) {
- /* found a match */
- p->next = item->next;
-
- if (!item->next)
- queue->tail = p;
-
- item->next = NULL;
- queue->count--;
-
- return (item);
- }
-
- return (NULL);
-}
-
-/****************************************************************************/
-/* */
 /* Routine Name: ipsintr_blocking */
 /* */
 /* Routine Description: */
--- 28p1/drivers/scsi/qla1280.c~ 2003-11-28 20:26:20.000000000 +0200
+++ 28p1/drivers/scsi/qla1280.c 2004-08-17 00:13:42.000000000 +0300
@@ -875,6 +875,41 @@
 }
 
 
+ /*
+ * qla2100_enable_intrs
+ * qla2100_disable_intrs
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ * None
+ */
+static inline void
+qla1280_enable_intrs(struct scsi_qla_host *ha)
+{
+ struct device_reg *reg;
+
+ reg = ha->iobase;
+ /* enable risc and host interrupts */
+ WRT_REG_WORD(&reg->ictrl, (ISP_EN_INT | ISP_EN_RISC));
+ RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
+ ha->flags.ints_enabled = 1;
+}
+
+static inline void
+qla1280_disable_intrs(struct scsi_qla_host *ha)
+{
+ struct device_reg *reg;
+
+ reg = ha->iobase;
+ /* disable risc and host interrupts */
+ WRT_REG_WORD(&reg->ictrl, 0);
+ RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
+ ha->flags.ints_enabled = 0;
+}
+
+
 /**************************************************************************
  * qla1280_do_device_init
  * This routine will register the device with the SCSI subsystem,
@@ -2049,40 +2084,6 @@
 /* QLogic ISP1280 Hardware Support Functions. */
 /****************************************************************************/
 
- /*
- * qla2100_enable_intrs
- * qla2100_disable_intrs
- *
- * Input:
- * ha = adapter block pointer.
- *
- * Returns:
- * None
- */
-static inline void
-qla1280_enable_intrs(struct scsi_qla_host *ha)
-{
- struct device_reg *reg;
-
- reg = ha->iobase;
- /* enable risc and host interrupts */
- WRT_REG_WORD(&reg->ictrl, (ISP_EN_INT | ISP_EN_RISC));
- RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
- ha->flags.ints_enabled = 1;
-}
-
-static inline void
-qla1280_disable_intrs(struct scsi_qla_host *ha)
-{
- struct device_reg *reg;
-
- reg = ha->iobase;
- /* disable risc and host interrupts */
- WRT_REG_WORD(&reg->ictrl, 0);
- RD_REG_WORD(&reg->ictrl); /* PCI Posted Write flush */
- ha->flags.ints_enabled = 0;
-}
-
 /*
  * qla1280_initialize_adapter
  * Initialize board.
--- 28p1/drivers/scsi/scsiiom.c~ 2000-12-31 21:06:00.000000000 +0200
+++ 28p1/drivers/scsi/scsiiom.c 2004-08-17 00:29:30.000000000 +0300
@@ -211,6 +211,24 @@
 };
 #endif
 
+static void __inline__
+dc390_InvalidCmd( PACB pACB )
+{
+ if( pACB->pActiveDCB->pActiveSRB->SRBState & (SRB_START_+SRB_MSGOUT) )
+ DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
+}
+
+#define DC390_ENABLE_MSGOUT DC390_write8 (ScsiCmd, SET_ATN_CMD)
+
+/* abort command */
+static void __inline__
+dc390_EnableMsgOut_Abort ( PACB pACB, PSRB pSRB )
+{
+ pSRB->MsgOutBuf[0] = ABORT;
+ pSRB->MsgCnt = 1; DC390_ENABLE_MSGOUT;
+ pSRB->pSRBDCB->DCBFlag &= ~ABORT_DEV_;
+}
+
 void __inline__
 DC390_Interrupt( int irq, void *dev_id, struct pt_regs *regs)
 {
@@ -569,8 +587,6 @@
 };
 #endif
 
-#define DC390_ENABLE_MSGOUT DC390_write8 (ScsiCmd, SET_ATN_CMD)
-
 /* reject_msg */
 static void __inline__
 dc390_MsgIn_reject (PACB pACB, PSRB pSRB)
@@ -580,15 +596,6 @@
   DEBUG0 (printk (KERN_INFO "DC390: Reject message\n");)
 }
 
-/* abort command */
-static void __inline__
-dc390_EnableMsgOut_Abort ( PACB pACB, PSRB pSRB )
-{
- pSRB->MsgOutBuf[0] = ABORT;
- pSRB->MsgCnt = 1; DC390_ENABLE_MSGOUT;
- pSRB->pSRBDCB->DCBFlag &= ~ABORT_DEV_;
-}
-
 static PSRB
 dc390_MsgIn_QTag (PACB pACB, PDCB pDCB, UCHAR tag)
 {
@@ -1355,6 +1362,47 @@
 };
 
 
+static void __inline__
+dc390_RequestSense( PACB pACB, PDCB pDCB, PSRB pSRB )
+{
+ PSCSICMD pcmd;
+
+ REMOVABLEDEBUG(printk (KERN_INFO "DC390: RequestSense (Cmd %02x, Id %02x, LUN %02x)\n",\
+ pSRB->pcmd->cmnd[0], pDCB->TargetID, pDCB->TargetLUN);)
+
+ pSRB->SRBFlag |= AUTO_REQSENSE;
+ //pSRB->Segment0[0] = (UINT) pSRB->CmdBlock[0];
+ //pSRB->Segment0[1] = (UINT) pSRB->CmdBlock[4];
+ //pSRB->Segment1[0] = ((UINT)(pSRB->pcmd->cmd_len) << 8) + pSRB->SGcount;
+ //pSRB->Segment1[1] = pSRB->TotalXferredLen;
+ pSRB->SavedSGCount = pSRB->SGcount;
+ pSRB->SavedTotXLen = pSRB->TotalXferredLen;
+ pSRB->AdaptStatus = 0;
+ pSRB->TargetStatus = 0; /* CHECK_CONDITION<<1; */
+
+ pcmd = pSRB->pcmd;
+
+ pSRB->Segmentx.address = (PUCHAR) &(pcmd->sense_buffer);
+ pSRB->Segmentx.length = sizeof(pcmd->sense_buffer);
+ pSRB->pSegmentList = &pSRB->Segmentx;
+ pSRB->SGcount = 1;
+ pSRB->SGIndex = 0;
+
+ //pSRB->CmdBlock[0] = REQUEST_SENSE;
+ //pSRB->CmdBlock[1] = pDCB->TargetLUN << 5;
+ //(USHORT) pSRB->CmdBlock[2] = 0;
+ //(USHORT) pSRB->CmdBlock[4] = sizeof(pcmd->sense_buffer);
+ //pSRB->ScsiCmdLen = 6;
+
+ pSRB->TotalXferredLen = 0;
+ pSRB->SGToBeXferLen = 0;
+ if( dc390_StartSCSI( pACB, pDCB, pSRB ) ) {
+ dc390_Going_to_Waiting ( pDCB, pSRB );
+ dc390_waiting_timer (pACB, HZ/5);
+ }
+}
+
+
 void
 dc390_SRBdone( PACB pACB, PDCB pDCB, PSRB pSRB )
 {
@@ -1738,53 +1786,3 @@
     return;
 }
 
-
-static void __inline__
-dc390_RequestSense( PACB pACB, PDCB pDCB, PSRB pSRB )
-{
- PSCSICMD pcmd;
-
- REMOVABLEDEBUG(printk (KERN_INFO "DC390: RequestSense (Cmd %02x, Id %02x, LUN %02x)\n",\
- pSRB->pcmd->cmnd[0], pDCB->TargetID, pDCB->TargetLUN);)
-
- pSRB->SRBFlag |= AUTO_REQSENSE;
- //pSRB->Segment0[0] = (UINT) pSRB->CmdBlock[0];
- //pSRB->Segment0[1] = (UINT) pSRB->CmdBlock[4];
- //pSRB->Segment1[0] = ((UINT)(pSRB->pcmd->cmd_len) << 8) + pSRB->SGcount;
- //pSRB->Segment1[1] = pSRB->TotalXferredLen;
- pSRB->SavedSGCount = pSRB->SGcount;
- pSRB->SavedTotXLen = pSRB->TotalXferredLen;
- pSRB->AdaptStatus = 0;
- pSRB->TargetStatus = 0; /* CHECK_CONDITION<<1; */
-
- pcmd = pSRB->pcmd;
-
- pSRB->Segmentx.address = (PUCHAR) &(pcmd->sense_buffer);
- pSRB->Segmentx.length = sizeof(pcmd->sense_buffer);
- pSRB->pSegmentList = &pSRB->Segmentx;
- pSRB->SGcount = 1;
- pSRB->SGIndex = 0;
-
- //pSRB->CmdBlock[0] = REQUEST_SENSE;
- //pSRB->CmdBlock[1] = pDCB->TargetLUN << 5;
- //(USHORT) pSRB->CmdBlock[2] = 0;
- //(USHORT) pSRB->CmdBlock[4] = sizeof(pcmd->sense_buffer);
- //pSRB->ScsiCmdLen = 6;
-
- pSRB->TotalXferredLen = 0;
- pSRB->SGToBeXferLen = 0;
- if( dc390_StartSCSI( pACB, pDCB, pSRB ) ) {
- dc390_Going_to_Waiting ( pDCB, pSRB );
- dc390_waiting_timer (pACB, HZ/5);
- }
-}
-
-
-
-static void __inline__
-dc390_InvalidCmd( PACB pACB )
-{
- if( pACB->pActiveDCB->pActiveSRB->SRBState & (SRB_START_+SRB_MSGOUT) )
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
-}
-
--- 28p1/drivers/scsi/AM53C974.c~ 2004-08-11 19:58:24.000000000 +0300
+++ 28p1/drivers/scsi/AM53C974.c 2004-08-17 00:47:29.000000000 +0300
@@ -1027,6 +1027,78 @@
         spin_unlock_irqrestore(&io_request_lock, flags);
 }
 
+/**************************************************************************
+* Function : AM53C974_set_async(struct Scsi_Host *instance, int target)
+*
+* Purpose : put controller into async. mode
+*
+* Inputs : instance -- which AM53C974
+* target -- which SCSI target to deal with
+*
+* Returns : nothing
+**************************************************************************/
+static __inline__ void AM53C974_set_async(struct Scsi_Host *instance, int target)
+{
+ AM53C974_local_declare();
+ struct AM53C974_hostdata *hostdata = (struct AM53C974_hostdata *) instance->hostdata;
+ AM53C974_setio(instance);
+
+ AM53C974_write_8(STPREG, hostdata->sync_per[target]);
+ AM53C974_write_8(SOFREG, (DEF_SOF_RAD << 6) | (DEF_SOF_RAA << 4));
+}
+
+/**************************************************************************
+* Function : AM53C974_set_sync(struct Scsi_Host *instance, int target)
+*
+* Purpose : put controller into sync. mode
+*
+* Inputs : instance -- which AM53C974
+* target -- which SCSI target to deal with
+*
+* Returns : nothing
+**************************************************************************/
+static __inline__ void AM53C974_set_sync(struct Scsi_Host *instance, int target)
+{
+ AM53C974_local_declare();
+ struct AM53C974_hostdata *hostdata = (struct AM53C974_hostdata *) instance->hostdata;
+ AM53C974_setio(instance);
+
+ AM53C974_write_8(STPREG, hostdata->sync_per[target]);
+ AM53C974_write_8(SOFREG, (SOFREG_SO & hostdata->sync_off[target]) |
+ (DEF_SOF_RAD << 6) | (DEF_SOF_RAA << 4));
+}
+
+/**************************************************************************
+* Function : AM53C974_transfer_dma(struct Scsi_Host *instance, short dir,
+* unsigned long length, char *data)
+*
+* Purpose : setup DMA transfer
+*
+* Inputs : instance -- which AM53C974
+* dir -- direction flag, 0: write to device, read from memory;
+* 1: read from device, write to memory
+* length -- number of bytes to transfer to from buffer
+* data -- pointer to data buffer
+*
+* Returns : nothing
+**************************************************************************/
+static __inline__ void AM53C974_transfer_dma(struct Scsi_Host *instance, short dir,
+ unsigned long length, char *data)
+{
+ AM53C974_local_declare();
+ AM53C974_setio(instance);
+
+ AM53C974_write_8(CMDREG, CMDREG_NOP);
+ AM53C974_write_8(DMACMD, (dir << 7) | DMACMD_INTE_D); /* idle command */
+ AM53C974_write_8(STCLREG, (unsigned char) (length & 0xff));
+ AM53C974_write_8(STCMREG, (unsigned char) ((length & 0xff00) >> 8));
+ AM53C974_write_8(STCHREG, (unsigned char) ((length & 0xff0000) >> 16));
+ AM53C974_write_32(DMASTC, length & 0xffffff);
+ AM53C974_write_32(DMASPA, virt_to_bus(data));
+ AM53C974_write_8(CMDREG, CMDREG_IT | CMDREG_DMA);
+ AM53C974_write_8(DMACMD, (dir << 7) | DMACMD_INTE_D | DMACMD_START);
+}
+
 /************************************************************************
 * Function : AM53C974_intr(int irq, void *dev_id, struct pt_regs *regs) *
 * *
@@ -1464,47 +1536,6 @@
         return (0);
 }
 
-/**************************************************************************
-* Function : AM53C974_set_async(struct Scsi_Host *instance, int target)
-*
-* Purpose : put controller into async. mode
-*
-* Inputs : instance -- which AM53C974
-* target -- which SCSI target to deal with
-*
-* Returns : nothing
-**************************************************************************/
-static __inline__ void AM53C974_set_async(struct Scsi_Host *instance, int target)
-{
- AM53C974_local_declare();
- struct AM53C974_hostdata *hostdata = (struct AM53C974_hostdata *) instance->hostdata;
- AM53C974_setio(instance);
-
- AM53C974_write_8(STPREG, hostdata->sync_per[target]);
- AM53C974_write_8(SOFREG, (DEF_SOF_RAD << 6) | (DEF_SOF_RAA << 4));
-}
-
-/**************************************************************************
-* Function : AM53C974_set_sync(struct Scsi_Host *instance, int target)
-*
-* Purpose : put controller into sync. mode
-*
-* Inputs : instance -- which AM53C974
-* target -- which SCSI target to deal with
-*
-* Returns : nothing
-**************************************************************************/
-static __inline__ void AM53C974_set_sync(struct Scsi_Host *instance, int target)
-{
- AM53C974_local_declare();
- struct AM53C974_hostdata *hostdata = (struct AM53C974_hostdata *) instance->hostdata;
- AM53C974_setio(instance);
-
- AM53C974_write_8(STPREG, hostdata->sync_per[target]);
- AM53C974_write_8(SOFREG, (SOFREG_SO & hostdata->sync_off[target]) |
- (DEF_SOF_RAD << 6) | (DEF_SOF_RAA << 4));
-}
-
 /***********************************************************************
 * Function : AM53C974_information_transfer(struct Scsi_Host *instance, *
 * unsigned char statreg, unsigned char isreg, *
@@ -2157,37 +2188,6 @@
 }
 
 /**************************************************************************
-* Function : AM53C974_transfer_dma(struct Scsi_Host *instance, short dir,
-* unsigned long length, char *data)
-*
-* Purpose : setup DMA transfer
-*
-* Inputs : instance -- which AM53C974
-* dir -- direction flag, 0: write to device, read from memory;
-* 1: read from device, write to memory
-* length -- number of bytes to transfer to from buffer
-* data -- pointer to data buffer
-*
-* Returns : nothing
-**************************************************************************/
-static __inline__ void AM53C974_transfer_dma(struct Scsi_Host *instance, short dir,
- unsigned long length, char *data)
-{
- AM53C974_local_declare();
- AM53C974_setio(instance);
-
- AM53C974_write_8(CMDREG, CMDREG_NOP);
- AM53C974_write_8(DMACMD, (dir << 7) | DMACMD_INTE_D); /* idle command */
- AM53C974_write_8(STCLREG, (unsigned char) (length & 0xff));
- AM53C974_write_8(STCMREG, (unsigned char) ((length & 0xff00) >> 8));
- AM53C974_write_8(STCHREG, (unsigned char) ((length & 0xff0000) >> 16));
- AM53C974_write_32(DMASTC, length & 0xffffff);
- AM53C974_write_32(DMASPA, virt_to_bus(data));
- AM53C974_write_8(CMDREG, CMDREG_IT | CMDREG_DMA);
- AM53C974_write_8(DMACMD, (dir << 7) | DMACMD_INTE_D | DMACMD_START);
-}
-
-/**************************************************************************
 * Function : AM53C974_dma_blast(struct Scsi_Host *instance, unsigned char dmastatus,
 * unsigned char statreg)
 *
--- 28p1/drivers/scsi/megaraid.c~ 2004-02-18 15:36:31.000000000 +0200
+++ 28p1/drivers/scsi/megaraid.c 2004-08-17 00:49:52.000000000 +0300
@@ -3471,6 +3471,24 @@
         return count;
 }
 
+static inline void mega_freeSgList (mega_host_config * megaCfg)
+{
+ int i;
+
+ for (i = 0; i < megaCfg->max_cmds; i++) {
+ if (megaCfg->scbList[i].sgList)
+ pci_free_consistent (megaCfg->dev,
+ sizeof (mega_64sglist) *
+ MAX_SGLIST,
+ megaCfg->scbList[i].sgList,
+ megaCfg->scbList[i].
+ dma_sghandle64);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) /* 0x020400 */
+ kfree (megaCfg->scbList[i].sgList); /* free sgList */
+#endif
+ }
+}
+
 /*---------------------------------------------------------------------
  * Release the controller's resources
  *---------------------------------------------------------------------*/
@@ -3880,24 +3898,6 @@
         return;
 }
 
-static inline void mega_freeSgList (mega_host_config * megaCfg)
-{
- int i;
-
- for (i = 0; i < megaCfg->max_cmds; i++) {
- if (megaCfg->scbList[i].sgList)
- pci_free_consistent (megaCfg->dev,
- sizeof (mega_64sglist) *
- MAX_SGLIST,
- megaCfg->scbList[i].sgList,
- megaCfg->scbList[i].
- dma_sghandle64);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) /* 0x020400 */
- kfree (megaCfg->scbList[i].sgList); /* free sgList */
-#endif
- }
-}
-
 /*----------------------------------------------
  * Get information about the card/driver
  *----------------------------------------------*/
--- 28p1/drivers/scsi/megaraid2.c~ 2004-08-08 02:26:05.000000000 +0300
+++ 28p1/drivers/scsi/megaraid2.c 2004-08-17 01:40:29.000000000 +0300
@@ -936,6 +936,19 @@
 }
 
 
+/**
+ * mega_runpendq()
+ * @adapter - pointer to our soft state
+ *
+ * Runs through the list of pending requests.
+ */
+static inline void
+mega_runpendq(adapter_t *adapter)
+{
+ if(!list_empty(&adapter->pending_list))
+ __mega_runpendq(adapter);
+}
+
 /*
  * megaraid_queue()
  * @scmd - Issue this scsi command
@@ -986,6 +999,98 @@
 
 
 /**
+ * mega_allocate_scb()
+ * @adapter - pointer to our soft state
+ * @cmd - scsi command from the mid-layer
+ *
+ * Allocate a SCB structure. This is the central structure for controller
+ * commands.
+ */
+static inline scb_t *
+mega_allocate_scb(adapter_t *adapter, Scsi_Cmnd *cmd)
+{
+ struct list_head *head = &adapter->free_list;
+ scb_t *scb;
+
+ /* Unlink command from Free List */
+ if( !list_empty(head) ) {
+
+ scb = list_entry(head->next, scb_t, list);
+
+ list_del_init(head->next);
+
+ scb->state = SCB_ACTIVE;
+ scb->cmd = cmd;
+ scb->dma_type = MEGA_DMA_TYPE_NONE;
+
+ return scb;
+ }
+
+ return NULL;
+}
+
+
+/**
+ * mega_get_ldrv_num()
+ * @adapter - pointer to our soft state
+ * @cmd - scsi mid layer command
+ * @channel - channel on the controller
+ *
+ * Calculate the logical drive number based on the information in scsi command
+ * and the channel number.
+ */
+static inline int
+mega_get_ldrv_num(adapter_t *adapter, Scsi_Cmnd *cmd, int channel)
+{
+ int tgt;
+ int ldrv_num;
+
+ tgt = cmd->target;
+
+ if ( tgt > adapter->this_id )
+ tgt--; /* we do not get inquires for initiator id */
+
+ ldrv_num = (channel * 15) + tgt;
+
+
+ /*
+ * If we have a logical drive with boot enabled, project it first
+ */
+ if( adapter->boot_ldrv_enabled ) {
+ if( ldrv_num == 0 ) {
+ ldrv_num = adapter->boot_ldrv;
+ }
+ else {
+ if( ldrv_num <= adapter->boot_ldrv ) {
+ ldrv_num--;
+ }
+ }
+ }
+
+ /*
+ * If "delete logical drive" feature is enabled on this controller.
+ * Do only if at least one delete logical drive operation was done.
+ *
+ * Also, after logical drive deletion, instead of logical drive number,
+ * the value returned should be 0x80+logical drive id.
+ *
+ * These is valid only for IO commands.
+ */
+
+ if (adapter->support_random_del && adapter->read_ldidmap )
+ switch (cmd->cmnd[0]) {
+ case READ_6: /* fall through */
+ case WRITE_6: /* fall through */
+ case READ_10: /* fall through */
+ case WRITE_10:
+ ldrv_num += 0x80;
+ }
+
+ return ldrv_num;
+}
+
+
+/**
  * mega_build_cmd()
  * @adapter - pointer to our soft state
  * @cmd - Prepare using this scsi command
@@ -1566,51 +1671,6 @@
 }
 
 
-/**
- * mega_allocate_scb()
- * @adapter - pointer to our soft state
- * @cmd - scsi command from the mid-layer
- *
- * Allocate a SCB structure. This is the central structure for controller
- * commands.
- */
-static inline scb_t *
-mega_allocate_scb(adapter_t *adapter, Scsi_Cmnd *cmd)
-{
- struct list_head *head = &adapter->free_list;
- scb_t *scb;
-
- /* Unlink command from Free List */
- if( !list_empty(head) ) {
-
- scb = list_entry(head->next, scb_t, list);
-
- list_del_init(head->next);
-
- scb->state = SCB_ACTIVE;
- scb->cmd = cmd;
- scb->dma_type = MEGA_DMA_TYPE_NONE;
-
- return scb;
- }
-
- return NULL;
-}
-
-
-/**
- * mega_runpendq()
- * @adapter - pointer to our soft state
- *
- * Runs through the list of pending requests.
- */
-static inline void
-mega_runpendq(adapter_t *adapter)
-{
- if(!list_empty(&adapter->pending_list))
- __mega_runpendq(adapter);
-}
-
 static void
 __mega_runpendq(adapter_t *adapter)
 {
@@ -1642,7 +1702,7 @@
  * busy. We also take the scb from the pending list if the mailbox is
  * available.
  */
-static inline int
+static int
 issue_scb(adapter_t *adapter, scb_t *scb)
 {
         volatile mbox64_t *mbox64 = adapter->mbox64;
@@ -1705,6 +1765,17 @@
 }
 
 
+/*
+ * Wait until the controller's mailbox is available
+ */
+static inline int
+mega_busywait_mbox (adapter_t *adapter)
+{
+ if (adapter->mbox->busy)
+ return __mega_busywait_mbox(adapter);
+ return 0;
+}
+
 /**
  * issue_scb_block()
  * @adapter - pointer to our soft state
@@ -1807,38 +1878,6 @@
 
 
 /**
- * megaraid_isr_iomapped()
- * @irq - irq
- * @devp - pointer to our soft state
- * @regs - unused
- *
- * Interrupt service routine for io-mapped controllers.
- * Find out if our device is interrupting. If yes, acknowledge the interrupt
- * and service the completed commands.
- */
-static void
-megaraid_isr_iomapped(int irq, void *devp, struct pt_regs *regs)
-{
- adapter_t *adapter = devp;
- unsigned long flags;
-
-
- spin_lock_irqsave(adapter->host_lock, flags);
-
- megaraid_iombox_ack_sequence(adapter);
-
- /* Loop through any pending requests */
- if( atomic_read(&adapter->quiescent ) == 0) {
- mega_runpendq(adapter);
- }
-
- spin_unlock_irqrestore(adapter->host_lock, flags);
-
- return;
-}
-
-
-/**
  * megaraid_iombox_ack_sequence - interrupt ack sequence for IO mapped HBAs
  * @adapter - controller's soft state
  *
@@ -1901,38 +1940,6 @@
 
 
 /**
- * megaraid_isr_memmapped()
- * @irq - irq
- * @devp - pointer to our soft state
- * @regs - unused
- *
- * Interrupt service routine for memory-mapped controllers.
- * Find out if our device is interrupting. If yes, acknowledge the interrupt
- * and service the completed commands.
- */
-static void
-megaraid_isr_memmapped(int irq, void *devp, struct pt_regs *regs)
-{
- adapter_t *adapter = devp;
- unsigned long flags;
-
-
- spin_lock_irqsave(adapter->host_lock, flags);
-
- megaraid_memmbox_ack_sequence(adapter);
-
- /* Loop through any pending requests */
- if(atomic_read(&adapter->quiescent) == 0) {
- mega_runpendq(adapter);
- }
-
- spin_unlock_irqrestore(adapter->host_lock, flags);
-
- return;
-}
-
-
-/**
  * megaraid_memmbox_ack_sequence - interrupt ack sequence for memory mapped HBAs
  * @adapter - controller's soft state
  *
@@ -2000,6 +2007,70 @@
 
 
 /**
+ * megaraid_isr_iomapped()
+ * @irq - irq
+ * @devp - pointer to our soft state
+ * @regs - unused
+ *
+ * Interrupt service routine for io-mapped controllers.
+ * Find out if our device is interrupting. If yes, acknowledge the interrupt
+ * and service the completed commands.
+ */
+static void
+megaraid_isr_iomapped(int irq, void *devp, struct pt_regs *regs)
+{
+ adapter_t *adapter = devp;
+ unsigned long flags;
+
+
+ spin_lock_irqsave(adapter->host_lock, flags);
+
+ megaraid_iombox_ack_sequence(adapter);
+
+ /* Loop through any pending requests */
+ if( atomic_read(&adapter->quiescent ) == 0) {
+ mega_runpendq(adapter);
+ }
+
+ spin_unlock_irqrestore(adapter->host_lock, flags);
+
+ return;
+}
+
+
+/**
+ * megaraid_isr_memmapped()
+ * @irq - irq
+ * @devp - pointer to our soft state
+ * @regs - unused
+ *
+ * Interrupt service routine for memory-mapped controllers.
+ * Find out if our device is interrupting. If yes, acknowledge the interrupt
+ * and service the completed commands.
+ */
+static void
+megaraid_isr_memmapped(int irq, void *devp, struct pt_regs *regs)
+{
+ adapter_t *adapter = devp;
+ unsigned long flags;
+
+
+ spin_lock_irqsave(adapter->host_lock, flags);
+
+ megaraid_memmbox_ack_sequence(adapter);
+
+ /* Loop through any pending requests */
+ if(atomic_read(&adapter->quiescent) == 0) {
+ mega_runpendq(adapter);
+ }
+
+ spin_unlock_irqrestore(adapter->host_lock, flags);
+
+ return;
+}
+
+
+/**
  * mega_cmd_done()
  * @adapter - pointer to our soft state
  * @completed - array of ids of completed commands
@@ -2008,7 +2079,7 @@
  *
  * Complete the comamnds and call the scsi mid-layer callback hooks.
  */
-static inline void
+static void
 mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
 {
         mega_ext_passthru *epthru = NULL;
@@ -2311,17 +2382,6 @@
 }
 
 
-/*
- * Wait until the controller's mailbox is available
- */
-static inline int
-mega_busywait_mbox (adapter_t *adapter)
-{
- if (adapter->mbox->busy)
- return __mega_busywait_mbox(adapter);
- return 0;
-}
-
 static int
 __mega_busywait_mbox (adapter_t *adapter)
 {
@@ -2476,6 +2536,44 @@
 }
 
 
+static inline void
+mega_free_sgl(adapter_t *adapter)
+{
+ scb_t *scb;
+ int i;
+
+ for(i = 0; i < adapter->max_cmds; i++) {
+
+ scb = &adapter->scb_list[i];
+
+ if( scb->sgl64 ) {
+ pci_free_consistent(adapter->dev,
+ sizeof(mega_sgl64) * adapter->sglen,
+ scb->sgl64,
+ scb->sgl_dma_addr);
+
+ scb->sgl64 = NULL;
+ }
+
+ if( scb->pthru ) {
+ pci_free_consistent(adapter->dev, sizeof(mega_passthru),
+ scb->pthru, scb->pthru_dma_addr);
+
+ scb->pthru = NULL;
+ }
+
+ if( scb->epthru ) {
+ pci_free_consistent(adapter->dev,
+ sizeof(mega_ext_passthru),
+ scb->epthru, scb->epthru_dma_addr);
+
+ scb->epthru = NULL;
+ }
+
+ }
+}
+
+
 /*
  * Release the controller's resources
  */
@@ -2605,44 +2703,6 @@
         return 0;
 }
 
-static inline void
-mega_free_sgl(adapter_t *adapter)
-{
- scb_t *scb;
- int i;
-
- for(i = 0; i < adapter->max_cmds; i++) {
-
- scb = &adapter->scb_list[i];
-
- if( scb->sgl64 ) {
- pci_free_consistent(adapter->dev,
- sizeof(mega_sgl64) * adapter->sglen,
- scb->sgl64,
- scb->sgl_dma_addr);
-
- scb->sgl64 = NULL;
- }
-
- if( scb->pthru ) {
- pci_free_consistent(adapter->dev, sizeof(mega_passthru),
- scb->pthru, scb->pthru_dma_addr);
-
- scb->pthru = NULL;
- }
-
- if( scb->epthru ) {
- pci_free_consistent(adapter->dev,
- sizeof(mega_ext_passthru),
- scb->epthru, scb->epthru_dma_addr);
-
- scb->epthru = NULL;
- }
-
- }
-}
-
-
 /*
  * Get information about the card/driver
  */
@@ -2860,6 +2920,27 @@
 }
 
 
+/**
+ * mega_allocate_inquiry()
+ * @dma_handle - handle returned for dma address
+ * @pdev - handle to pci device
+ *
+ * allocates memory for inquiry structure
+ */
+static inline caddr_t
+mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
+{
+ return pci_alloc_consistent(pdev, sizeof(mega_inquiry3), dma_handle);
+}
+
+
+static inline void
+mega_free_inquiry(caddr_t inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
+{
+ pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry, dma_handle);
+}
+
+
 #ifdef CONFIG_PROC_FS
 /* Following code handles /proc fs */
 
@@ -5069,66 +5150,6 @@
 
 
 /**
- * mega_get_ldrv_num()
- * @adapter - pointer to our soft state
- * @cmd - scsi mid layer command
- * @channel - channel on the controller
- *
- * Calculate the logical drive number based on the information in scsi command
- * and the channel number.
- */
-static inline int
-mega_get_ldrv_num(adapter_t *adapter, Scsi_Cmnd *cmd, int channel)
-{
- int tgt;
- int ldrv_num;
-
- tgt = cmd->target;
-
- if ( tgt > adapter->this_id )
- tgt--; /* we do not get inquires for initiator id */
-
- ldrv_num = (channel * 15) + tgt;
-
-
- /*
- * If we have a logical drive with boot enabled, project it first
- */
- if( adapter->boot_ldrv_enabled ) {
- if( ldrv_num == 0 ) {
- ldrv_num = adapter->boot_ldrv;
- }
- else {
- if( ldrv_num <= adapter->boot_ldrv ) {
- ldrv_num--;
- }
- }
- }
-
- /*
- * If "delete logical drive" feature is enabled on this controller.
- * Do only if at least one delete logical drive operation was done.
- *
- * Also, after logical drive deletion, instead of logical drive number,
- * the value returned should be 0x80+logical drive id.
- *
- * These is valid only for IO commands.
- */
-
- if (adapter->support_random_del && adapter->read_ldidmap )
- switch (cmd->cmnd[0]) {
- case READ_6: /* fall through */
- case WRITE_6: /* fall through */
- case READ_10: /* fall through */
- case WRITE_10:
- ldrv_num += 0x80;
- }
-
- return ldrv_num;
-}
-
-
-/**
  * mega_reorder_hosts()
  *
  * Hack: reorder the scsi hosts in mid-layer so that the controller with the
@@ -5342,27 +5363,6 @@
 }
 
 
-/**
- * mega_allocate_inquiry()
- * @dma_handle - handle returned for dma address
- * @pdev - handle to pci device
- *
- * allocates memory for inquiry structure
- */
-static inline caddr_t
-mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
-{
- return pci_alloc_consistent(pdev, sizeof(mega_inquiry3), dma_handle);
-}
-
-
-static inline void
-mega_free_inquiry(caddr_t inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
-{
- pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry, dma_handle);
-}
-
-
 /** mega_internal_dev_inquiry()
  * @adapter - pointer to our soft state
  * @ch - channel for this device
--- 28p1/drivers/scsi/megaraid2.h~ 2004-08-16 20:23:01.000000000 +0300
+++ 28p1/drivers/scsi/megaraid2.h 2004-08-17 01:28:04.000000000 +0300
@@ -1091,14 +1091,12 @@
 static int megaraid_detect(Scsi_Host_Template *);
 static void mega_find_card(Scsi_Host_Template *, u16, u16);
 static int mega_query_adapter(adapter_t *);
-static inline int issue_scb(adapter_t *, scb_t *);
+static int issue_scb(adapter_t *, scb_t *);
 static int mega_setup_mailbox(adapter_t *);
 
 static int megaraid_queue (Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
 static scb_t * mega_build_cmd(adapter_t *, Scsi_Cmnd *, int *);
-static inline scb_t *mega_allocate_scb(adapter_t *, Scsi_Cmnd *);
 static void __mega_runpendq(adapter_t *);
-static inline void mega_runpendq(adapter_t *);
 static int issue_scb_block(adapter_t *, u_char *);
 
 static void megaraid_isr_memmapped(int, void *, struct pt_regs *);
@@ -1115,9 +1113,8 @@
 
 static int mega_build_sglist (adapter_t *adapter, scb_t *scb,
                               u32 *buffer, u32 *length);
-static inline int mega_busywait_mbox (adapter_t *);
 static int __mega_busywait_mbox (adapter_t *);
-static inline void mega_cmd_done(adapter_t *, u8 [], int, int);
+static void mega_cmd_done(adapter_t *, u8 [], int, int);
 static inline void mega_free_sgl (adapter_t *adapter);
 static void mega_8_to_40ld (mraid_inquiry *inquiry,
                 mega_inquiry3 *enquiry3, mega_product_info *);
@@ -1167,8 +1164,6 @@
 
 static int mega_adapinq(adapter_t *, dma_addr_t);
 static int mega_internal_dev_inquiry(adapter_t *, u8, u8, dma_addr_t);
-static inline caddr_t mega_allocate_inquiry(dma_addr_t *, struct pci_dev *);
-static inline void mega_free_inquiry(caddr_t, dma_addr_t, struct pci_dev *);
 static int mega_print_inquiry(char *, char *);
 #endif
 
@@ -1179,7 +1174,6 @@
                 scb_t *, Scsi_Cmnd *, int, int);
 static void mega_enum_raid_scsi(adapter_t *);
 static void mega_get_boot_drv(adapter_t *);
-static inline int mega_get_ldrv_num(adapter_t *, Scsi_Cmnd *, int);
 static int mega_support_random_del(adapter_t *);
 static int mega_del_logdrv(adapter_t *, int);
 static int mega_do_del_logdrv(adapter_t *, int);
--- 28p1/drivers/scsi/nsp32.c~ 2003-11-28 20:26:20.000000000 +0200
+++ 28p1/drivers/scsi/nsp32.c 2004-08-17 01:46:27.000000000 +0300
@@ -3365,6 +3365,48 @@
         return val;
 }
 
+static inline void nsp32_prom_set(nsp32_hw_data *data, int bit, int val)
+{
+ unsigned int base = data->BaseAddress;
+ int tmp;
+
+ tmp = nsp32_index_read1(base, SERIAL_ROM_CTL);
+
+ if (val == 0) {
+ tmp &= ~bit;
+ } else {
+ tmp |= bit;
+ }
+
+ nsp32_index_write1(base, SERIAL_ROM_CTL, tmp);
+
+ udelay(10);
+}
+
+static inline int nsp32_prom_get(nsp32_hw_data *data, int bit)
+{
+ unsigned int base = data->BaseAddress;
+ int tmp, ret;
+
+ if (bit != SROM_DATA) {
+ nsp32_msg(KERN_ERR, "return value is not appropriate");
+ return 0;
+ }
+
+
+ tmp = nsp32_index_read1(base, SERIAL_ROM_CTL) & bit;
+
+ if (tmp == 0) {
+ ret = 0;
+ } else {
+ ret = 1;
+ }
+
+ udelay(10);
+
+ return ret;
+}
+
 static void nsp32_prom_start (nsp32_hw_data *data)
 {
         /* start condition */
@@ -3410,49 +3452,6 @@
         return val;
 }
 
-static inline void nsp32_prom_set(nsp32_hw_data *data, int bit, int val)
-{
- unsigned int base = data->BaseAddress;
- int tmp;
-
- tmp = nsp32_index_read1(base, SERIAL_ROM_CTL);
-
- if (val == 0) {
- tmp &= ~bit;
- } else {
- tmp |= bit;
- }
-
- nsp32_index_write1(base, SERIAL_ROM_CTL, tmp);
-
- udelay(10);
-}
-
-static inline int nsp32_prom_get(nsp32_hw_data *data, int bit)
-{
- unsigned int base = data->BaseAddress;
- int tmp, ret;
-
- if (bit != SROM_DATA) {
- nsp32_msg(KERN_ERR, "return value is not appropriate");
- return 0;
- }
-
-
- tmp = nsp32_index_read1(base, SERIAL_ROM_CTL) & bit;
-
- if (tmp == 0) {
- ret = 0;
- } else {
- ret = 1;
- }
-
- udelay(10);
-
- return ret;
-}
-
-
 /**************************************************************************
  * Power Management
  */
--- 28p1/drivers/scsi/aic7xxx/aic79xx_osm.c~ 2004-08-16 20:13:01.000000000 +0300
+++ 28p1/drivers/scsi/aic7xxx/aic79xx_osm.c 2004-08-17 02:02:23.000000000 +0300
@@ -2871,6 +2871,19 @@
         ahd_unlock(ahd, &s);
 }
 
+static __inline int
+ahd_linux_dv_fallback(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
+{
+ u_long s;
+ int retval;
+
+ ahd_lock(ahd, &s);
+ retval = ahd_linux_fallback(ahd, devinfo);
+ ahd_unlock(ahd, &s);
+
+ return (retval);
+}
+
 static void
 ahd_linux_dv_transition(struct ahd_softc *ahd, struct scsi_cmnd *cmd,
                         struct ahd_devinfo *devinfo,
@@ -3517,19 +3530,6 @@
         cmd->cmnd[4] = le | SSS_START;
 }
 
-static __inline int
-ahd_linux_dv_fallback(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
-{
- u_long s;
- int retval;
-
- ahd_lock(ahd, &s);
- retval = ahd_linux_fallback(ahd, devinfo);
- ahd_unlock(ahd, &s);
-
- return (retval);
-}
-
 static int
 ahd_linux_fallback(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
 {

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

• Previous message: Christoph Hellwig: "Re: Merge I2O patches from -mm"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]