[2.6.9-rc1-bk7] LIBATA - "irq 11: nobody cared" on sil 3112a

From: Maciej Górnicki (gutko_at_poczta.onet.pl)
Date: 08/31/04

  • Next message: Spam: "Re: silent semantic changes with reiser4" 
    Date:	Tue, 31 Aug 2004 22:47:48 +0200
To: linux-kernel <linux-kernel@vger.kernel.org>

    Hello,
    Im trying to run libata driver on my Asus A7N8X-deluxe
    (latest bios 1008) with Sil 3112a controller, but i'm
    permanently getting "irq 11: nobody cared.....disabling
    irq11" error. After this error computer hangs totally. I
    found some info about enabling "Enhanced mode" and "Sata
    only" options in bios, but they are not avalible in my
    motherboard. I've managed to chatch some, hopefully, useful
    info through netconsole. My kernel config and lspci output
    are also there. This log was made with ACPI compiled in,
    but there was exactly same problem when ACPI was not
    compiled in.

    http://www.gutko.neostrada.pl/nobody_cared.txt
    Maciej Gornicki
    ps. these 2 errors with "eth0: BUG!" appeared when I enabled
    netconsole.

    irq 11: nobody cared!
    [<c01080ca>] __report_bad_irq+0x2a/0x90
    [<c01081bc>] note_interrupt+0x6c/0xa0
    [<c0108491>] do_IRQ+0x121/0x130
    [<c0106674>] common_interrupt+0x18/0x20
    [<c011e530>] __do_softirq+0x30/0x90
    [<c011e5b6>]<4>eth0: BUG! Tx Ring full, refusing to send buffer.
    do_softirq+0x26/0x30
    [<c010846d>] do_IRQ+0xfd/0x130
    [<c0106674>] common_interrupt+0x18/0x20
    [<c0103b93>] default_idle+0x23/0x30
    [<c0103bfc>] cpu_idle+0x2c/0x40
    [<c03827ad>]<4>eth0: BUG! Tx Ring full, refusing to send buffer.
    start_kernel+0x17d/0x1c0
    [<c03823b0>] unknown_bootoption+0x0/0x160
    handlers:
    [<c02240f0>] (ata_interrupt+0x0/0x1c0)
    Disabling IRQ #11

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Spam: "Re: silent semantic changes with reiser4"

    Relevant Pages

    • Re: [ltp] Re: ACPI Hibernate and Suspend Strange behavior 2.6.7/-mm1
      ... > I wonder why the system has got such a high affinity to IRQ 11. ... The BIOS default setting is to have all PCI interrupts on 11. ... here's a log message from the system when it tries to come ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • 2.6.10 IRQ 18 issues gone away
      ... My ongoing issue with runaway IRQ 18 floods has gone away, ... perfectly as shared on 2.4.22-1.2199 with the original BIOS. ... and pointed me at installing from CD instead of floppy (I don't ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: NVIDIA proprietary driver problem
      ... > BIOS has setting whether IRQ should be assigned to the VGA card ... > no IRQ: ... As far as I can tell, my BIOS has no such option. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: Re:parport disabled?
      ... I was able to make it work by going to the BIOS and set the IO & IRQ there. ... Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 30-450 570-962 ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: [linux-audio-dev] Re: [announce] [patch] Voluntary Kernel Preemption Patch
      ... there are a lot of cond_resched, we might be calling it with irq ... And even if nobody does, ... _never_ a bug. ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)