Re: swsusp on x86-64 w/ nforce3
From: Rafael J. Wysocki (rjw_at_sisk.pl)
Date: 09/07/04
- Previous message: Con Kolivas: "Re: swapping and the value of /proc/sys/vm/swappiness"
- In reply to: Pavel Machek: "Re: swsusp on x86-64 w/ nforce3"
- Next in thread: Tony Lindgren: "Re: swsusp on x86-64 w/ nforce3"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: linux-kernel@vger.kernel.org Date: Tue, 7 Sep 2004 01:10:35 +0200
On Monday 06 of September 2004 22:32, Pavel Machek wrote:
> Hi!
>
> > > Can you tell me, please, if swsusp, as in the 2.6.9-rc1-bk12 kernel, is
> > > supposed to work on x86-64-based systems (specifically, with the nforce3
> > > chipset)?
> >
> > Anyway, on such a system (.config and the output of dmesg are attached), I
get
> > the following:
> >
> > Stopping tasks:
> > ==============================================================|
> > Freeing
> >
memory: ............................................................................................................|
> > Suspending devices... /critical section: counting pages to copy..[nosave
pfn
> > 0x59b]..................................................)
> > Alloc pagedir
> > ..[nosave pfn
> >
0x59b]................................................................................critical
> > section/: done (40890 pa)
> > APIC error on CPU0: 80(08)
>
> Try noapic?
The result is the same. :-( It is quite strange, though, because I have:
rafael@albercik:~> cat /proc/interrupts
CPU0
0: 448292 XT-PIC timer
1: 1047 XT-PIC i8042
2: 0 XT-PIC cascade
5: 684 XT-PIC ohci_hcd, NVidia nForce3
8: 0 XT-PIC rtc
9: 839 XT-PIC acpi, yenta
10: 2 XT-PIC ehci_hcd
11: 3034 XT-PIC SysKonnect SK-98xx, ohci_hcd, yenta, ohci1394
12: 4520 XT-PIC i8042
14: 2522 XT-PIC ide0
15: 8635 XT-PIC ide1
NMI: 74
LOC: 448090
ERR: 1
MIS: 0
but at the same time:
rafael@albercik:~> dmesg | grep -i apic
Bootdata ok (command line is root=/dev/hdc6 vga=792 resume=/dev/hdc3 noapic)
PCI bridge 00:0a from 10de found. Setting "noapic". Overwrite with "apic"
OEM ID: ASUSTeK <6>Product ID: L5D <6>APIC at: 0xFEE00000
Processor #0 15:4 APIC version 16
I/O APIC #1 Version 17 at 0xFEC00000.
Kernel command line: root=/dev/hdc6 vga=792 resume=/dev/hdc3 noapic
console=tty0
Using local APIC NMI watchdog using perfctr0
Using local APIC timer interrupts.
Detected 12.468 MHz APIC timer.
The nolapic probably oopses, because the box sort of hanged when I set it, but
I have to use the serial console to confirm it.
Regards,
RJW
-- For a successful technology, reality must take precedence over public relations, for nature cannot be fooled. -- Richard P. Feynman - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Con Kolivas: "Re: swapping and the value of /proc/sys/vm/swappiness"
- In reply to: Pavel Machek: "Re: swsusp on x86-64 w/ nforce3"
- Next in thread: Tony Lindgren: "Re: swsusp on x86-64 w/ nforce3"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
