IEEE1394 not working with VT6307 under kernel 2.6.8-1.521
From: David J. Schuller (djs63_at_cornell.edu)
Date: 09/23/04
- Previous message: Pavel Machek: "Re: year 2038 problem on x86-64"
- Next in thread: Lee Revell: "Re: IEEE1394 not working with VT6307 under kernel 2.6.8-1.521"
- Reply: Lee Revell: "Re: IEEE1394 not working with VT6307 under kernel 2.6.8-1.521"
- Reply: Jurgen Kramer: "Re: IEEE1394 not working with VT6307 under kernel 2.6.8-1.521"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: linux-kernel@vger.kernel.org Date: Wed, 22 Sep 2004 18:39:35 -0400
[1]
Recognition of external IEEE1394 disk fails with Via VT6307 chip under
kernel 2.6.8-1.521
[2]
Motherboard is Soltek SL-B7C-FGR, which has onboard IEEE1394 with a Via
VT6307 chip. Southbridge is Via VT8237. CPU is Socket A Athlon MP 2800+.
Kernel is 2.6.8-1.521 under Fedora Core 2. I load the appropriate
modules with "modprobe ohci1394". Something like this appears in
/var/log/messages:
Sep 22 15:14:29 mclib4 kernel: ohci1394: $Rev: 1223 $ Ben Collins
<bcollins@debian.org>
Sep 22 15:14:29 mclib4 kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
IRQ=[5] MMIO=[dffff000-dffff7ff] Max Packet=[2048]
Sep 22 15:14:34 mclib4 kernel: ohci1394: $Rev: 1223 $ Ben Collins
<bcollins@debian.org>
Sep 22 15:14:34 mclib4 ieee1394.agent[2403]: ... no drivers for IEEE1394
product 0x/0x/0x
Sep 22 15:14:34 mclib4 kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI):
IRQ=[5] MMIO=[dffff000-dffff7ff] Max Packet=[2048]
Sep 22 15:14:35 mclib4 ieee1394.agent[2673]: ... no drivers for IEEE1394
product 0x/0x/0x
I attach an external IEEE1394 hard disk. Nothing else happens. No
further lines show up in /var/log/messages. No entries show up in
/proc/scsi/scsi.
I know the disk and cable are good, I have mounted it on other systems
(e.g. ASUS A7N8X-E deluxe). I know the procedure is good because those
other systems had the same version of software. I know it's not a mobo
hardware problem because the disk can be recognized and mounted
successfully with a different kernel (Knoppix 3.6 with kernel 2.4.27).
That leaves me with this: the current 2.6.8-1.521 kernel either has no
support for the VT6307 chip, or that support is broken.
[3]
Keywords: IEEE1394 ,FireWire, Via VT6307, 2.6.8-1
[4]
[root@mclib4 root]# cat /proc/version
Linux version 2.6.8-1.521 (bhcompile@tweety.build.redhat.com) (gcc
version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18
EDT 2004
[7.1]
[root@mclib4 root]# sh /usr/src/linux-2.6.5-1.358/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux mclib4 2.6.8-1.521 #1 Mon Aug 16 09:01:18 EDT 2004 i686 athlon
i386 GNU/Linux
Gnu C 3.3.3
Gnu make 3.80
binutils 2.15.90.0.3
util-linux 2.12
mount 2.12
module-init-tools 2.4.26
e2fsprogs 1.35
jfsutils 1.1.4
xfsprogs 2.6.13
pcmcia-cs 3.2.7
quota-tools 3.10.
PPP 2.4.2
isdn4k-utils 3.3
nfs-utils 1.0.6
Linux C Library 2.3.3
Dynamic linker (ldd) 2.3.3
Procps 3.2.0
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
Modules Loaded udf snd_mixer_oss snd_via82xx snd_ac97_codec
snd_pcm snd_timer snd_page_alloc gameport snd_mpu401_uart snd_rawmidi
snd_seq_device snd soundcore ohci1394 ieee1394 parport_pc lp parport
autofs4 via_velocity floppy sg dm_mod joydev uhci_hcd ehci_hcd button
battery asus_acpi ac md5 ipv6 ext3 jbd sata_via libata sd_mod scsi_mod
[7.2]
[root@mclib4 proc]# cat cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : AMD Athlon(tm) MP 2800+
stepping : 0
cpu MHz : 2125.544
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 4169.72
[7.3]
[root@mclib4 root]# cat /proc/modules
udf 79429 0 - Live 0x42ba5000
snd_mixer_oss 14017 0 - Live 0x42a95000
snd_via82xx 24165 0 - Live 0x42ae5000
snd_ac97_codec 58821 1 snd_via82xx, Live 0x42b16000
snd_pcm 83529 1 snd_via82xx, Live 0x42b00000
snd_timer 25413 1 snd_pcm, Live 0x42a73000
snd_page_alloc 8393 2 snd_via82xx,snd_pcm, Live 0x42a64000
gameport 4033 1 snd_via82xx, Live 0x42a71000
snd_mpu401_uart 7361 1 snd_via82xx, Live 0x42a6e000
snd_rawmidi 21733 1 snd_mpu401_uart, Live 0x42a88000
snd_seq_device 6473 1 snd_rawmidi, Live 0x42a6b000
snd 45477 8
snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0x42a7b000
soundcore 7713 1 snd, Live 0x42a68000
ohci1394 31577 0 - Live 0x42a45000
ieee1394 285333 1 ohci1394, Live 0x42a9e000
parport_pc 21249 1 - Live 0x42a3e000
lp 9133 0 - Live 0x428fa000
parport 35977 2 parport_pc,lp, Live 0x428a5000
autofs4 20677 0 - Live 0x428e0000
via_velocity 28129 0 - Live 0x428d2000
floppy 54001 0 - Live 0x428e7000
sg 28513 0 - Live 0x428ca000
dm_mod 47317 0 - Live 0x42873000
joydev 7169 0 - Live 0x4284c000
uhci_hcd 28505 0 - Live 0x4289b000
ehci_hcd 27973 0 - Live 0x42893000
button 4825 0 - Live 0x4286a000
battery 7117 0 - Live 0x4282c000
asus_acpi 9177 0 - Live 0x4286f000
ac 3533 0 - Live 0x42838000
md5 3905 1 - Live 0x4283b000
ipv6 217349 14 - Live 0x4290c000
ext3 96937 2 - Live 0x428b1000
jbd 66521 1 ext3, Live 0x42881000
sata_via 4805 3 - Live 0x4282f000
libata 29637 1 sata_via, Live 0x42843000
sd_mod 17473 4 - Live 0x42832000
scsi_mod 105360 3 sg,libata,sd_mod, Live 0x4284f000
[7.4]
[root@mclib4 proc]# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f8-03ff : serial
0cf8-0cff : PCI conf1
a000-afff : PCI Bus #01
a800-a8ff : 0000:01:00.0
bc00-bc7f : 0000:00:09.0
c000-c0ff : 0000:00:0a.0
c000-c0ff : via-velocity
c400-c41f : 0000:00:10.0
c400-c41f : uhci_hcd
c800-c81f : 0000:00:10.1
c800-c81f : uhci_hcd
cc00-cc1f : 0000:00:10.2
cc00-cc1f : uhci_hcd
d000-d01f : 0000:00:10.3
d000-d01f : uhci_hcd
d400-d4ff : 0000:00:11.5
d400-d4ff : VIA8233
d800-d8ff : 0000:00:0f.0
d800-d8ff : sata_via
dc00-dc0f : 0000:00:0f.0
dc00-dc0f : sata_via
e000-e003 : 0000:00:0f.0
e000-e003 : sata_via
e400-e407 : 0000:00:0f.0
e400-e407 : sata_via
e800-e803 : 0000:00:0f.0
e800-e803 : sata_via
ec00-ec07 : 0000:00:0f.0
ec00-ec07 : sata_via
fc00-fc0f : 0000:00:0f.1
fc00-fc07 : ide0
fc08-fc0f : ide1
[root@mclib4 proc]# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-3ff3ffff : System RAM
00100000-002f6fff : Kernel code
002f7000-00399bff : Kernel data
3ff40000-3ff4ffff : ACPI Tables
3ff50000-3fffffff : ACPI Non-volatile Storage
cfd00000-dfcfffff : PCI Bus #01
d4000000-d7ffffff : 0000:01:00.1
d8000000-dbffffff : 0000:01:00.0
dfe00000-dfefffff : PCI Bus #01
dfee0000-dfeeffff : 0000:01:00.1
dfef0000-dfefffff : 0000:01:00.0
dffff000-dffff7ff : 0000:00:09.0
dffff000-dffff7ff : ohci1394
dffff800-dffff8ff : 0000:00:0a.0
dffff800-dffff8ff : via-velocity
dffffc00-dffffcff : 0000:00:10.4
dffffc00-dffffcff : ehci_hcd
e0000000-e3ffffff : 0000:00:00.0
fff80000-ffffffff : reserved
[7.5]
[root@mclib4 proc]# lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400] Chipset Host
Bridge
Subsystem: VIA Technologies, Inc. VT8378 [KM400] Chipset Host
Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable)
Capabilities: [80] AGP version 3.5
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3+ Rate=x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: cfd00000-dfcfffff
Expansion ROM at 0000a000 [disabled] [size=4K]
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dffff000 (32-bit, non-prefetchable)
Region 1: I/O ports at bc00 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3119
(rev 11)
Subsystem: VIA Technologies, Inc.: Unknown device 0110
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c000
Region 1: Memory at dffff800 (32-bit, non-prefetchable)
[size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller (rev 80)
Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at ec00
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e400 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: I/O ports at d800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 5
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 08
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at cc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 08
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if
20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 10
Interrupt: pin C routed to IRQ 10
Region 0: Memory at dffffc00 (32-bit, non-prefetchable)
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800
South]
Subsystem: VIA Technologies, Inc. VT8237 ISA bridge [K8T800
South]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Avance Logic Inc.: Unknown device 4720
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at d400
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon
9200] (rev 01) (prog-if 00 [VGA])
Subsystem: Hightech Information System Ltd.: Unknown device 29a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable)
[size=dfec0000]
Region 1: I/O ports at a800 [size=256]
Region 2: Memory at dfef0000 (32-bit, non-prefetchable)
[size=64K]
Expansion ROM at 00020000 [disabled]
Capabilities: [58] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200]
(Secondary) (rev 01)
Subsystem: Hightech Information System Ltd.: Unknown device 29a0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size 08
Region 0: Memory at d4000000 (32-bit, prefetchable)
Region 1: Memory at dfee0000 (32-bit, non-prefetchable)
[size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[7.6]
[root@mclib4 proc]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST380013AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
[7.7]
[root@mclib4 proc]# cat devices
Character devices:
1 mem
4 /dev/vc/0
4 tty
4 ttyS
5 /dev/tty
5 /dev/console
5 /dev/ptmx
6 lp
7 vcs
10 misc
13 input
14 sound
21 sg
29 fb
36 netlink
116 alsa
128 ptm
136 pts
171 ieee1394
180 usb
Block devices:
1 ramdisk
2 fd
8 sd
9 md
22 ide1
65 sd
66 sd
67 sd
68 sd
69 sd
70 sd
71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
253 device-mapper
254 mdp
If you don't have access to a system with a VT6307 chip I am willing to
run any diagnostics you can provide.
Cheers,
--
=======================================================================
I love the fables of philosophers,
I laugh at those of children,
and I hate those of impostors. - Voltaire
=======================================================================
David J. Schuller
modern man in a post-modern world
MacCHESS, Cornell University
djs63@cornell.edu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Pavel Machek: "Re: year 2038 problem on x86-64"
- Next in thread: Lee Revell: "Re: IEEE1394 not working with VT6307 under kernel 2.6.8-1.521"
- Reply: Lee Revell: "Re: IEEE1394 not working with VT6307 under kernel 2.6.8-1.521"
- Reply: Jurgen Kramer: "Re: IEEE1394 not working with VT6307 under kernel 2.6.8-1.521"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
