2.6.9-rc2-mm2 ohci_hcd doesn't work

From: Bjorn Helgaas (bjorn.helgaas_at_hp.com)
Date: 09/23/04

  • Next message: Madnux: "Re: 2.6.x ( unable to open an initial console & unable to mount devfs, err: -5 )" 
    To: Roman Weissgaerber <weissg@vienna.at>, linux-usb-devel@lists.sourceforge.net, David Brownell <dbrownell@users.sourceforge.net>
Date:	Thu, 23 Sep 2004 14:57:16 -0600

    This is on an HP DL360. This device works fine with the current
    2.6.9-rc2 BK tree, but fails with -mm2. Here's the USB stuff:

     ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10
     ohci_hcd 0000:00:0f.2: ServerWorks OSB4/CSB5 OHCI USB Controller
     ohci_hcd 0000:00:0f.2: irq 10, pci mem 0xf5e70000
     ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
     ohci_hcd 0000:00:0f.2: init err (00002edf 0000)
     ohci_hcd 0000:00:0f.2: can't start
     ohci_hcd 0000:00:0f.2: init error -75
     ohci_hcd 0000:00:0f.2: remove, state 0
     ohci_hcd 0000:00:0f.2: USB bus 1 deregistered
     ohci_hcd: probe of 0000:00:0f.2 failed with error -75
     USB Universal Host Controller Interface driver v2.2
     usbcore: registered new driver usbhid
     drivers/usb/input/hid-core.c: v2.0:USB HID core driver

    The corresponding output from the working (2.6.9-rc2) boot:

     ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10
     ohci_hcd 0000:00:0f.2: ServerWorks OSB4/CSB5 OHCI USB Controller
     ohci_hcd 0000:00:0f.2: irq 10, pci mem f8806000
     ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
     hub 1-0:1.0: USB hub found
     hub 1-0:1.0: 4 ports detected
     USB Universal Host Controller Interface driver v2.2
     usbcore: registered new driver usbhid
     drivers/usb/input/hid-core.c: v2.0:USB HID core driver

    Here's the complete console output from the failing boot.
    Let me know if there's more information I can collect.

    Linux version 2.6.9-rc2-mm2 (helgaas@dl360) (gcc version 3.3.3 (Debian 20040422)) #1 SMP Thu Sep 23 14:17:33 MDT 2004
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
     BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000007fffa000 (usable)
     BIOS-e820: 000000007fffa000 - 0000000080000000 (ACPI data)
     BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
     BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
     BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
    Warning only 896MB will be used.
    Use a HIGHMEM enabled kernel.
    896MB LOWMEM available.
    found SMP MP-table at 000f4fd0
    DMI 2.3 present.
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
    ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
    Processor #6 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 15:2 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
    ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    Processor #7 15:2 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
    ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
    IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
    ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
    IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47
    ACPI: IOAPIC (id[0x05] address[0xfec03000] gsi_base[48])
    IOAPIC[3]: apic_id 5, version 17, address 0xfec03000, GSI 48-63
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    Enabling APIC mode: Flat. Using 4 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Built 1 zonelists
    Initializing CPU#0
    Kernel command line: console=ttyS0,115200n8 root=/dev/cciss/c0d0p1 pci=routeirq BOOT_IMAGE=bzImage
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 2800.967 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 903516k/917504k available (3509k kernel code, 13564k reserved, 1135k data, 492k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
    per-CPU timeslice cutoff: 1463.19 usecs.
    task migration cache decay timeout: 2 msecs.
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 0
    CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
    Booting processor 2/6 eip 3000
    Initializing CPU#2
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 3
    CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
    Booting processor 3/7 eip 3000
    Initializing CPU#3
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 3
    CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
    Total of 4 processors activated (22282.24 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    checking TSC synchronization across 4 CPUs: passed.
    Brought up 4 CPUs
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=6
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    mtrr: your CPUs had inconsistent fixed MTRR settings
    mtrr: probably your BIOS does not setup all CPUs.
    mtrr: corrected configuration.
    ACPI: Subsystem revision 20040816
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
    ACPI: PCI Root Bridge [PCI1] (00:01)
    PCI: Probing PCI hardware (bus 01)
    ACPI: PCI Root Bridge [PCI2] (00:04)
    PCI: Probing PCI hardware (bus 04)
    ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 7 *10 11 15)
    ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN17] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 *7 10 11 15)
    ACPI: PCI Interrupt Link [IN23] (IRQs 4 *5 7 10 11 15)
    ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN29] (IRQs 4 5 7 10 11 *15)
    ACPI: PCI Interrupt Link [IN30] (IRQs 4 5 7 10 *11 15)
    ACPI: PCI Interrupt Link [IN31] (IRQs 4 5 7 10 11 15) *3
    ACPI: PCI Interrupt Link [IN32] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN33] (IRQs 4 5 7 10 11 15) *0, disabled.
    ACPI: PCI Interrupt Link [IN34] (IRQs 4 5 7 10 11 15) *0, disabled.
    SCSI subsystem initialized
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    ** Routing PCI interrupts for all devices because "pci=routeirq"
    ** was specified. If this was required to make a driver work,
    ** please email the output of "lspci" to bjorn.helgaas@hp.com
    ** so I can fix the driver.
    ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 169
    ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 23 (level, low) -> IRQ 177
    ACPI: PCI interrupt 0000:00:05.2[B] -> GSI 22 (level, low) -> IRQ 185
    ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 10
    ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 30 (level, low) -> IRQ 193
    ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 29 (level, low) -> IRQ 201
    PCI: Device 00:00 not found by BIOS
    PCI: Device 00:01 not found by BIOS
    PCI: Device 00:02 not found by BIOS
    PCI: Device 00:78 not found by BIOS
    PCI: Device 00:7b not found by BIOS
    PCI: Device 00:88 not found by BIOS
    PCI: Device 00:8a not found by BIOS
    Starting balanced_irq
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NTFS driver 2.1.18-WIP [Flags: R/O].
    ACPI: Power Button (FF) [PWRF]
    Real Time Clock Driver v1.12
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.100 (c) Dave Jones
    ACPI: PS/2 Keyboard Controller [KBD] at I/O 0x60, 0x64, irq 1
    ACPI: PS/2 Mouse Controller [PS2M] at irq 12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: Floppy Controller [FDC0] at I/O 0x3f2-0x3f5 irq 6 dma channel 2
    ACPI: [FDC0] doesn't declare FD_DCR; also claiming 0x3f7
    Using anticipatory io scheduler
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a National Semiconductor PC87306
    loop: loaded (max 8 devices)
    HP CISS Driver (v 2.6.2)
    ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 169
    cciss: using DAC cycles
          blocks= 35553120 block_size= 512
          heads= 255, sectors= 32, cylinders= 4357

     cciss/c0d0: p1 p2
    Intel(R) PRO/1000 Network Driver - version 5.3.19-k2
    Copyright (c) 1999-2004 Intel Corporation.
    e100: Intel(R) PRO/100 Network Driver, 3.1.4-NAPI
    e100: Copyright(c) 1999-2004 Intel Corporation
    tg3.c:v3.10 (September 14, 2004)
    ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 30 (level, low) -> IRQ 193
    eth0: Tigon3 [partno(N/A) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:7f:b4:69:94
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
    ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 29 (level, low) -> IRQ 201
    eth1: Tigon3 [partno(N/A) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:7f:b4:89:9f
    eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
    SvrWks CSB5: chipset revision 147
    SvrWks CSB5: not 100% native mode: will probe irqs later
    SvrWks CSB5: simplex device: DMA forced
        ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
    SvrWks CSB5: simplex device: DMA forced
        ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
    hda: CRN-8245B, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hda: ATAPI 24X CD-ROM drive, 128kB Cache
    Uniform CD-ROM driver Revision: 3.20
    ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10
    ohci_hcd 0000:00:0f.2: ServerWorks OSB4/CSB5 OHCI USB Controller
    ohci_hcd 0000:00:0f.2: irq 10, pci mem 0xf5e70000
    ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:0f.2: init err (00002edf 0000)
    ohci_hcd 0000:00:0f.2: can't start
    ohci_hcd 0000:00:0f.2: init error -75
    ohci_hcd 0000:00:0f.2: remove, state 0
    ohci_hcd 0000:00:0f.2: USB bus 1 deregistered
    ohci_hcd: probe of 0000:00:0f.2 failed with error -75
    USB Universal Host Controller Interface driver v2.2
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    input: PS/2 Generic Mouse on isa0060/serio1
    input: PC Speaker
    Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
    ALSA device list:
      No soundcards found.
    NET: Registered protocol family 2
    IP: routing cache hash table of 8192 buckets, 64Kbytes
    TCP: Hash tables configured (established 262144 bind 65536)
    IPv4 over IPv4 tunneling driver
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    ACPI: (supports S0 S4 S5)
    ACPI wakeup devices:

    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 492k freed
    INIT: version 2.85 booting
    Activating swap.
    Adding 2097136k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1
    Checking root file system...
    fsck 1.35 (28-Feb-2004)
    /dev/cciss/c0d0p1: clean, 481857/1954560 files, 2207300/3906596 blocks
    EXT3 FS on cciss/c0d0p1, internal journal
    rm: cannot remove `/dev/shm/root': Not a directory
    System time was Thu Sep 23 20:22:18 UTC 2004.
    Setting the System Clock using the Hardware Clock as reference...
    System Clock set. System local time is now Thu Sep 23 20:22:20 UTC 2004.
    Creating device-mapper devices...done.
    Checking all file systems...
    fsck 1.35 (28-Feb-2004)
    Setting kernel variables ...
    ... done.
    Mounting local filesystems...
    Cleaning /tmp /var/run /var/lock.
    Running 0dns-down to make sure resolv.conf is ok...done.
    Cleaning: /etc/network/ifstate.
    Setting up IP spoofing protection: rp_filter.
    Configuring network interfaces...Internet Software Consortium DHCP Client 2.0pl5
    Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
    All rights reserved.

    Please contribute if you find this software useful.
    For info, please visit http://www.isc.org/dhcp-contrib.html

    Listening on LPF/eth0/00:0e:7f:b4:69:94
    Sending on LPF/eth0/00:0e:7f:b4:69:94
    Sending on Socket/fallback/fallback-net
    DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
    tg3: eth0: Link is up at 100 Mbps, full duplex.
    tg3: eth0: Flow control is off for TX and off for RX.
    DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
    DHCPOFFER from 10.0.0.1
    DHCPREQUEST on eth0 to 255.255.255.255 port 67
    DHCPACK from 10.0.0.1
    bound to 10.36.62.114 -- renewal in 129600 seconds.
    done.
    Loading the saved-state of the serial devices...
    /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A

    Setting the System Clock using the Hardware Clock as reference...
    System Clock set. Local time: Thu Sep 23 14:22:32 MDT 2004

    Running ntpdate to synchronize clock.
    Initializing random number generator...done.
    Recovering nvi editor sessions... done.
    Setting up X server socket directory /tmp/.X11-unix...done.
    Setting up ICE socket directory /tmp/.ICE-unix...done.
    INIT: Entering runlevel: 2
    Starting system log daemon: syslogd.
    Starting kernel log daemon: klogd.
    Starting MTA: 2004-09-23 14:22:36 Failed to open configuration file /etc/exim/exim.conf
    Starting internet superserver: inetd.
    Starting OpenBSD Secure Shell server: sshd/etc/ssh/sshd_config line 19: Deprecated option PAMAuthenticationViaKbdInt
    /etc/ssh/sshd_config line 38: Deprecated option RhostsAuthentication
    .
    Starting deferred execution scheduler: atd.
    Starting periodic command scheduler: cron.

    Debian GNU/Linux testing/unstable dl360 ttyS0

    dl360 login:
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Madnux: "Re: 2.6.x ( unable to open an initial console & unable to mount devfs, err: -5 )"