Re: [PATCH] USB and Driver Core patches for 2.6.10
From: Greg KH (greg_at_kroah.com)
Date: 01/08/05
- Previous message: Greg KH: "Re: [PATCH] USB and Driver Core patches for 2.6.10"
- Maybe in reply to: Greg KH: "Re: [PATCH] USB and Driver Core patches for 2.6.10"
- Reply: Greg KH: "Re: [PATCH] USB and Driver Core patches for 2.6.10"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Fri, 7 Jan 2005 21:47:45 -0800 To: linux-usb-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org
ChangeSet 1.1938.446.14, 2004/12/15 16:32:16-08:00, david-b@pacbell.net
[PATCH] USB: usbcore changes for usb_dev->ep[](2/15)
This patch updates usbcore to match interface changes in the previous patch.
- udev->ep[] arrays are updated during config change events and
as needed during enumeration;
- usb_epnum_to_ep_desc() vanishes;
- so do the udev->epmaxpacket[] arrays.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
drivers/usb/core/hcd.c | 10 ++--------
drivers/usb/core/hub.c | 45 +++++++++++++++++++++++++--------------------
drivers/usb/core/message.c | 45 +++++++++++++++++++++++++--------------------
drivers/usb/core/urb.c | 2 +-
drivers/usb/core/usb.c | 44 +++++---------------------------------------
drivers/usb/core/usb.h | 2 --
6 files changed, 58 insertions(+), 90 deletions(-)
diff -Nru a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
--- a/drivers/usb/core/hcd.c 2005-01-07 15:49:45 -08:00
+++ b/drivers/usb/core/hcd.c 2005-01-07 15:49:45 -08:00
@@ -807,7 +807,7 @@
down (&usb_bus_list_lock);
usb_dev->bus->root_hub = usb_dev;
- usb_dev->epmaxpacketin[0] = usb_dev->epmaxpacketout[0] = 64;
+ usb_dev->ep0.desc.wMaxPacketSize = 64;
retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
if (retval != sizeof usb_dev->descriptor) {
usb_dev->bus->root_hub = NULL;
@@ -1335,14 +1335,8 @@
local_irq_disable ();
+ /* ep is already gone from udev->ep_{in,out}[]; no more submits */
rescan:
- /* (re)block new requests, as best we can */
- if (endpoint & USB_DIR_IN)
- udev->epmaxpacketin [epnum] = 0;
- else
- udev->epmaxpacketout [epnum] = 0;
-
- /* then kill any current requests */
spin_lock (&hcd_data_lock);
list_for_each_entry (urb, &dev->urb_list, urb_list) {
int tmp = urb->pipe;
diff -Nru a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
--- a/drivers/usb/core/hub.c 2005-01-07 15:49:45 -08:00
+++ b/drivers/usb/core/hub.c 2005-01-07 15:49:45 -08:00
@@ -2024,6 +2024,13 @@
return portstatus;
}
+static void ep0_reinit(struct usb_device *udev)
+{
+ usb_disable_endpoint(udev, 0 + USB_DIR_IN);
+ usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ udev->ep_in[0] = udev->ep_out[0] = &udev->ep0;
+}
+
#define usb_sndaddr0pipe() (PIPE_CONTROL << 30)
#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN)
@@ -2041,12 +2048,8 @@
USB_REQ_SET_ADDRESS, 0, udev->devnum, 0,
NULL, 0, HZ * USB_CTRL_SET_TIMEOUT);
if (retval == 0) {
- int m = udev->epmaxpacketin[0];
-
usb_set_device_state(udev, USB_STATE_ADDRESS);
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
- udev->epmaxpacketin[0] = udev->epmaxpacketout[0] = m;
+ ep0_reinit(udev);
}
return retval;
}
@@ -2104,22 +2107,21 @@
*/
switch (udev->speed) {
case USB_SPEED_HIGH: /* fixed at 64 */
- i = 64;
+ udev->ep0.desc.wMaxPacketSize = 64;
break;
case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
/* to determine the ep0 maxpacket size, try to read
* the device descriptor to get bMaxPacketSize0 and
* then correct our initial guess.
*/
- i = 64;
+ udev->ep0.desc.wMaxPacketSize = 64;
break;
case USB_SPEED_LOW: /* fixed at 8 */
- i = 8;
+ udev->ep0.desc.wMaxPacketSize = 8;
break;
default:
goto fail;
}
- udev->epmaxpacketin[0] = udev->epmaxpacketout[0] = i;
dev_info (&udev->dev,
"%s %s speed USB device using %s and address %d\n",
@@ -2194,7 +2196,10 @@
retval = -ENODEV;
goto fail;
}
- if (udev->descriptor.bMaxPacketSize0 == 0) {
+ switch (udev->descriptor.bMaxPacketSize0) {
+ case 64: case 32: case 16: case 8:
+ break;
+ default:
dev_err(&udev->dev, "device descriptor "
"read/%s, error %d\n",
"64", j);
@@ -2241,12 +2246,14 @@
goto fail;
/* Should we verify that the value is valid? */
- i = udev->descriptor.bMaxPacketSize0;
- if (udev->epmaxpacketin[0] != i) {
- dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
- udev->epmaxpacketin[0] = udev->epmaxpacketout[0] = i;
+ /* (YES!) */
+ if (udev->ep0.desc.wMaxPacketSize
+ != udev->descriptor.bMaxPacketSize0) {
+ udev->ep0.desc.wMaxPacketSize
+ = udev->descriptor.bMaxPacketSize0;
+ dev_dbg(&udev->dev, "ep0 maxpacket = %d\n",
+ udev->ep0.desc.wMaxPacketSize);
+ ep0_reinit(udev);
}
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
@@ -2508,8 +2515,7 @@
loop:
hub_port_disable(hdev, port);
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ ep0_reinit(udev);
release_address(udev);
usb_put_dev(udev);
if (status == -ENOTCONN)
@@ -2893,8 +2899,7 @@
/* ep0 maxpacket size may change; let the HCD know about it.
* Other endpoints will be handled by re-enumeration. */
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ ep0_reinit(udev);
ret = hub_port_init(parent, udev, port, i);
if (ret >= 0)
break;
diff -Nru a/drivers/usb/core/message.c b/drivers/usb/core/message.c
--- a/drivers/usb/core/message.c 2005-01-07 15:49:45 -08:00
+++ b/drivers/usb/core/message.c 2005-01-07 15:49:45 -08:00
@@ -918,16 +918,21 @@
*/
void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
{
- if (dev && dev->bus && dev->bus->op && dev->bus->op->disable)
- dev->bus->op->disable(dev, epaddr);
- else {
- unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
-
- if (usb_endpoint_out(epaddr))
- dev->epmaxpacketout[epnum] = 0;
- else
- dev->epmaxpacketin[epnum] = 0;
+ unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+ struct usb_host_endpoint *ep;
+
+ if (!dev)
+ return;
+
+ if (usb_endpoint_out(epaddr)) {
+ ep = dev->ep_out[epnum];
+ dev->ep_out[epnum] = NULL;
+ } else {
+ ep = dev->ep_in[epnum];
+ dev->ep_in[epnum] = NULL;
}
+ if (ep && dev->bus && dev->bus->op && dev->bus->op->disable)
+ dev->bus->op->disable(dev, ep->desc.bEndpointAddress);
}
/**
@@ -1002,27 +1007,27 @@
/*
* usb_enable_endpoint - Enable an endpoint for USB communications
* @dev: the device whose interface is being enabled
- * @epd: pointer to the endpoint descriptor
+ * @ep: the endpoint
*
- * Resets the endpoint toggle and stores its maxpacket value.
+ * Resets the endpoint toggle, and sets dev->ep_{in,out} pointers.
* For control endpoints, both the input and output sides are handled.
*/
-void usb_enable_endpoint(struct usb_device *dev,
- struct usb_endpoint_descriptor *epd)
+static void
+usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep)
{
- int maxsize = epd->wMaxPacketSize;
- unsigned int epaddr = epd->bEndpointAddress;
+ unsigned int epaddr = ep->desc.bEndpointAddress;
unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
- int is_control = ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_CONTROL);
+ int is_control;
+ is_control = ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_CONTROL);
if (usb_endpoint_out(epaddr) || is_control) {
usb_settoggle(dev, epnum, 1, 0);
- dev->epmaxpacketout[epnum] = maxsize;
+ dev->ep_out[epnum] = ep;
}
if (!usb_endpoint_out(epaddr) || is_control) {
usb_settoggle(dev, epnum, 0, 0);
- dev->epmaxpacketin[epnum] = maxsize;
+ dev->ep_in[epnum] = ep;
}
}
@@ -1040,7 +1045,7 @@
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i)
- usb_enable_endpoint(dev, &alt->endpoint[i].desc);
+ usb_enable_endpoint(dev, &alt->endpoint[i]);
}
/**
diff -Nru a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
--- a/drivers/usb/core/urb.c 2005-01-07 15:49:45 -08:00
+++ b/drivers/usb/core/urb.c 2005-01-07 15:49:45 -08:00
@@ -265,7 +265,7 @@
max = usb_maxpacket (dev, pipe, is_out);
if (max <= 0) {
dev_dbg(&dev->dev,
- "bogus endpoint ep%d%s in %s (bad maxpacket %d)",
+ "bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
usb_pipeendpoint (pipe), is_out ? "out" : "in",
__FUNCTION__, max);
return -EMSGSIZE;
diff -Nru a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
--- a/drivers/usb/core/usb.c 2005-01-07 15:49:45 -08:00
+++ b/drivers/usb/core/usb.c 2005-01-07 15:49:45 -08:00
@@ -267,44 +267,6 @@
}
/**
- * usb_epnum_to_ep_desc - get the endpoint object with a given endpoint number
- * @dev: the device whose current configuration+altsettings is considered
- * @epnum: the desired endpoint, masked with USB_DIR_IN as appropriate.
- *
- * This walks the device descriptor for the currently active configuration,
- * and returns a pointer to the endpoint with that particular endpoint
- * number, or null.
- *
- * Note that interface descriptors are not required to list endpoint
- * numbers in any standardized order, so that it would be wrong to
- * assume that ep2in precedes either ep5in, ep2out, or even ep1out.
- * This routine helps device drivers avoid such mistakes.
- */
-struct usb_endpoint_descriptor *
-usb_epnum_to_ep_desc(struct usb_device *dev, unsigned epnum)
-{
- struct usb_host_config *config = dev->actconfig;
- int i, k;
-
- if (!config)
- return NULL;
- for (i = 0; i < config->desc.bNumInterfaces; i++) {
- struct usb_interface *intf;
- struct usb_host_interface *alt;
-
- /* only endpoints in current altsetting are active */
- intf = config->interface[i];
- alt = intf->cur_altsetting;
-
- for (k = 0; k < alt->desc.bNumEndpoints; k++)
- if (epnum == alt->endpoint[k].desc.bEndpointAddress)
- return &alt->endpoint[k].desc;
- }
-
- return NULL;
-}
-
-/**
* usb_driver_claim_interface - bind a driver to an interface
* @driver: the driver to be bound
* @iface: the interface to which it will be bound; must be in the
@@ -728,6 +690,11 @@
dev->dev.release = usb_release_dev;
dev->state = USB_STATE_ATTACHED;
+ dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
+ dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
+ /* ep0 maxpacket comes later, from device descriptor */
+ dev->ep_in[0] = dev->ep_out[0] = &dev->ep0;
+
/* Save readable and stable topology id, distinguishing devices
* by location for diagnostics, tools, driver model, etc. The
* string is a path along hub ports, from the root. Each device's
@@ -1533,7 +1500,6 @@
* These symbols are exported for device (or host controller)
* driver modules to use.
*/
-EXPORT_SYMBOL(usb_epnum_to_ep_desc);
EXPORT_SYMBOL(usb_register);
EXPORT_SYMBOL(usb_deregister);
diff -Nru a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
--- a/drivers/usb/core/usb.h 2005-01-07 15:49:45 -08:00
+++ b/drivers/usb/core/usb.h 2005-01-07 15:49:45 -08:00
@@ -13,8 +13,6 @@
extern void usb_release_interface_cache(struct kref *ref);
extern void usb_disable_device (struct usb_device *dev, int skip_ep0);
-extern void usb_enable_endpoint (struct usb_device *dev,
- struct usb_endpoint_descriptor *epd);
extern void usb_enable_interface (struct usb_device *dev,
struct usb_interface *intf);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Greg KH: "Re: [PATCH] USB and Driver Core patches for 2.6.10"
- Maybe in reply to: Greg KH: "Re: [PATCH] USB and Driver Core patches for 2.6.10"
- Reply: Greg KH: "Re: [PATCH] USB and Driver Core patches for 2.6.10"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
