2.6.11-rc4-mm1 and dpt_i2o Adaptec I2O RAID controller

sebastian.faerber_at_web.de
Date: 02/23/05

  • Next message: Erik van Konijnenburg: "[ANNOUNCE] yaird 0.0.4, a mkinitrd based on hotplug concepts" 
    Date:	Wed, 23 Feb 2005 18:18:46 +0100
To: linux-kernel@vger.kernel.org

    Hi all,

    i'm trying to get an Adaptec 2015S Zero Channel Raid Controller up and running in a very new Asus Mainboard (NCL-DS)
    with Dual Xeons.
    I already tried kernel 2.4.29 and plain 2.6.10 but both just lock up when loading the dpt_i2o driver.
    With 2.6.11-rc4-mm1 i could gather the following output while booting: 

    --
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
ACPI: PCI interrupt 0000:09:01.0[A] -> GSI 11 (level, low) -> IRQ 11
Adaptec I2O RAID controller 0 irq=11
     BAR0 f8880000 - size= 100000
     BAR1 f8a00000 - size= 1000000
BUG: soft lockup detected on CPU#0!
Pid: 1, comm:              swapper
EIP: 0060:[<c011d05e>] CPU: 0
EIP is at __do_softirq+0x2e/0x90
 EFLAGS: 00000246    Not tainted  (2.6.11-rc4-mm1)
EAX: dfcb0000 EBX: 00000022 ECX: 00000022 EDX: 00000000
ESI: c04c8ea0 EDI: 0000000a EBP: 00000246 DS: 007b ES: 007b
CR0: 8005003b CR2: fffcd000 CR3: 004a3000 CR4: 000006d0
 [<c011d0e7>] do_softirq+0x27/0x30
 [<c010472b>] do_IRQ+0x3b/0x70
 [<c0102fba>] common_interrupt+0x1a/0x20
 [<c01362c2>] setup_irq+0xa2/0xf0
 [<c02db930>] adpt_isr+0x0/0x1f0 [more]
 [<c01364a1>] request_irq+0x71/0x90
 [<c02da051>] adpt_install_hba+0x2a1/0x420
 [<c0272993>] bus_add_driver+0xc3/0xd0
 [<c02d9080>] adpt_detect+0x50/0x1e0
 [<c049135a>] init_this_scsi_driver+0x3a/0x100
 [<c04747eb>] do_initcalls+0x2b/0xc0
 [<c0100290>] init+0x0/0xf0
 [<c0100290>] init+0x0/0xf0
 [<c01002b5>] init+0x25/0xf0
 [<c01012d8>] kernel_thread_helper+0x0/0x18
 [<c01012dd>] kernel_thread_helper+0x5/0x18
--
I have several machines running with dpt_i2o raid controller and 2.4.29 for example but they are on older
Tyan boards.
Any suggestions how to get this controller up and running ? I suppose it has something to do with APIC and/or IRQ routing ?
If you need any additional information just let me know.
Best Regards,
Sebastian Faerber
______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
  • Next message: Erik van Konijnenburg: "[ANNOUNCE] yaird 0.0.4, a mkinitrd based on hotplug concepts"

    Relevant Pages

    • Re: SATA vs SCSI
      ... > at least their early SATA chips didn't. ... Adaptec have the 1210SA for around £40 which might fit the bill. ... You could well be right as we suspect something very weird going on with the ...
      (comp.sys.ibm.pc.hardware.storage)
    • Re: SATA vs SCSI
      ... >> at least their early SATA chips didn't. ... Adaptec have the 1210SA for around £40 which might fit the bill. ... And chanded PCI interrupts by doing that. ...
      (comp.sys.ibm.pc.hardware.storage)
    • Adaptec Storage Manager on Suse 9.0?
      ... My home file server runs Suse 9.0 and has an Adaptec 3400S raid controller. ... except currently the only way to monitor/manage the ...
      (alt.os.linux.suse)
    • Re: A good RAID controller for D1000 storage array
      ... In case this is really a search for a RAID controller - the D1000 being ... forget about Adaptec for Sun SPARC machines. ... I'd look at the LSI/Symbios LSI/SYM22802 dual-channel HVD HBA. ...
      (comp.sys.sun.hardware)
    • hp smart arrray 5i and kernel 2.6.X
      ... Raid Controller: 5i with newest firmware caue teh old one has an bug on ... After installation the system and installing 2.6 I try to format the ... send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    Loading