IRQ problems with 915gm chipset

From: Tilo Lutz (TiloLutz_at_gmx.de)
Date: 06/02/05

  • Next message: Esben Nielsen: "Re: [PATCH] Abstracted Priority Inheritance for RT" 
    To: linux-kernel@vger.kernel.org
Date:	Thu, 02 Jun 2005 10:18:09 +0200

    Hi

    I have some problems getting linux work on my
    Acer Travelmat 3002 notebook. I run Suse Linux 9.3
    with linux 2.6.11.4

    Floppy is not present therefore irq6 is free.
    com1 and lpt1 are disabled -> irq4 and 7 are free for pci

    I get best results with
    1. pci=noacpi
    2. acpi_irq_balance acpi_irq_pci=5,4,7,10
    Disabling acpi completly makes it worse both times.
    With apic bootup locks and the screen is blank as
    soon as the kernel is loaded.
    I also tried the current kernel 2.6.12rc5 with no result.

    Not working devices with result1:
    0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
    Family) High Definition Audio Controller (rev 04)
    This device should be connected with [LNKE].
    Bios did not assing an irq for this link. The driver fails to load
    because
    no irq is provided.
    pci=biosirq don't help.

    Not working devices with result2:
    0000:06:07.0 CardBus bridge: Texas Instruments: Unknown device 8031
    0000:06:07.2 FireWire (IEEE 1394): Texas Instruments: Unknown device
    8032
    0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
    (ICH6 Family) USB UHCI #2 (rev 04)
    All not working devices are connected with irq11.
    PCI Interrupt Link [LNKF] and [LNKG] were not used during bootup.
    Is that OK?

    How can I get everything work?
    I think result1 is the better way to start because more devices are
    working.
    Does anyone have an idea how I can get everything work.

    Sound would be nice but I also need ieee1394 for my cdrom.

    Regards, Tilo Lutz

    Notebook:/home/tilo # cat /proc/interrupts #result1
               CPU0
      0: 152849 XT-PIC timer
      1: 171 XT-PIC i8042
      2: 0 XT-PIC cascade
      8: 2 XT-PIC rtc
      9: 605 XT-PIC acpi
    10: 1182 XT-PIC uhci_hcd, ipw2200, eth0
    11: 3 XT-PIC ohci1394, uhci_hcd, uhci_hcd, uhci_hcd,
    ehci_hcd, yenta
    12: 11793 XT-PIC i8042
    14: 12606 XT-PIC ide0
    NMI: 0
    LOC: 0
    ERR: 0
    MIS: 0

    Notebook:/home/tilo # cat /proc/interrupts #result2:
               CPU0
      0: 2415737 XT-PIC timer
      1: 6083 XT-PIC i8042
      2: 0 XT-PIC cascade
      5: 0 XT-PIC uhci_hcd, ehci_hcd
      7: 100000 XT-PIC uhci_hcd
      8: 2 XT-PIC rtc
      9: 7792 XT-PIC acpi
    10: 32472 XT-PIC uhci_hcd, HDA Intel, eth0
    11: 100000 XT-PIC ohci1394, uhci_hcd, yenta
    12: 308415 XT-PIC i8042
    14: 22665 XT-PIC ide0
    NMI: 0
    LOC: 0
    ERR: 0
    MIS: 0

    part of dmesg, result1:
    PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Please try
    using pci=biosirq.
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    pcie_portdrv_probe->Dev[2660:8086] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie02]
    Allocate Port Service[pcie03]
    PCI: No IRQ known for interrupt pin B of device 0000:00:1c.1. Please try
    using pci=biosirq.
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    pcie_portdrv_probe->Dev[2662:8086] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie02]
    Allocate Port Service[pcie03]
    PCI: No IRQ known for interrupt pin C of device 0000:00:1c.2. Please try
    using pci=biosirq.
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    pcie_portdrv_probe->Dev[2664:8086] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie02]
    Allocate Port Service[pcie03]
    [...]
    PCI: No IRQ known for interrupt pin A of device 0000:00:1b.0. Please try
    using pci=biosirq.
    ALSA /tmp/alsa/alsa-driver/alsa-kernel/pci/hda/hda_intel.c:1332:
    hda-intel: unable to grab IRQ 0
    HDA Intel: probe of 0000:00:1b.0 failed with error -16

    part of dmesg, result2:
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: Embedded Controller [EC0] (gpe 29)
    [...]
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie02]
    Allocate Port Service[pcie03]
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI interrupt 0000:00:1c.1[B] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie02]
    Allocate Port Service[pcie03]
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
    PCI: setting IRQ 7 as level-triggered
    ACPI: PCI interrupt 0000:00:1c.2[C] -> GSI 7 (level, low) -> IRQ 7
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie02]
    Allocate Port Service[pcie03]
    [...]
    ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 7 (level, low) -> IRQ 7
    [...]
    ieee1394: Initialized config rom entry `ip1394'
    ieee1394: raw1394: /dev/raw1394 device initialized
    ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
        ACPI-0367: *** Warning: Unable to derive IRQ for device 0000:06:07.2
    ACPI: PCI interrupt 0000:06:07.2[A]: no GSI - using IRQ 11
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]
    MMIO=[b0117000-b01177ff] Max Packet=[2048]
    [...]
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 5 (level, low) -> IRQ 5
    [...]
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
    [...]
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 7 (level, low) -> IRQ 7
    [...]
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    irq 7: nobody cared!
    [<c0134fdc>] __report_bad_irq+0x1c/0x70
    [<c01350bb>] note_interrupt+0x5b/0x80
    [<c0134c7b>] __do_IRQ+0xdb/0xf0
    [<c0105288>] do_IRQ+0x38/0x60
    [<c0103cba>] common_interrupt+0x1a/0x20
    [<c011007b>] acpi_copy_wakeup_routine+0x1b/0xa0
    [<c0134b59>] handle_IRQ_event+0x29/0x70
    [<c0134c33>] __do_IRQ+0x93/0xf0
    [<c0105288>] do_IRQ+0x38/0x60
    [<c0103cba>] common_interrupt+0x1a/0x20
    [<c013007b>] __pm_unregister+0x2b/0x40
    [<c011e171>] __do_softirq+0x31/0xa0
    [<c011e206>] do_softirq+0x26/0x30
    [<c010528d>] do_IRQ+0x3d/0x60
    [<c0103cba>] common_interrupt+0x1a/0x20
    [<c0134e59>] setup_irq+0x89/0xd0
    [<e0716d00>] usb_hcd_irq+0x0/0x60 [usbcore]
    [<c0134fa1>] request_irq+0x71/0x90
    [<e071a5fa>] usb_hcd_pci_probe+0x1aa/0x450 [usbcore]
    [<c01dafa2>] pci_device_probe_static+0x32/0x50
    [<c01dafe7>] __pci_device_probe+0x27/0x40
    [<c01db01b>] pci_device_probe+0x1b/0x40
    [<c0234fd1>] driver_probe_device+0x21/0x60
    [<c02350fd>] driver_attach+0x4d/0x80
    [<c023551d>] bus_add_driver+0x6d/0xa0
    [<c0235a18>] driver_register+0x28/0x30
    [<c01db1d9>] pci_register_driver+0x49/0x60
    [<e0040087>] uhci_hcd_init+0x87/0xd7 [uhci_hcd]
    [<c012e9a4>] sys_init_module+0x104/0x180
    [<c0102c49>] sysenter_past_esp+0x52/0x79
    handlers:
    [<e0716d00>] (usb_hcd_irq+0x0/0x60 [usbcore])
    Disabling IRQ #7
    uhci_hcd 0000:00:1d.2: irq 7, io base 0x1860
    [...]
    ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 10 (level, low) -> IRQ 10
    [...]
    ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 5 (level, low) -> IRQ 5
    [...]
        ACPI-0367: *** Warning: Unable to derive IRQ for device 0000:06:06.0
    ACPI: PCI interrupt 0000:06:06.0[A]: no GSI - using IRQ 10
    [...]
    ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 10 (level, low) -> IRQ 10
    [...]
    ACPI: PCI interrupt 0000:06:07.0[A]: no GSI - using IRQ 11
    [...]
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
    ACPI: PCI interrupt 0000:06:08.0[A] -> GSI 10 (level, low) -> IRQ 10
    [...]
    irq 11: nobody cared!
    [<c0134fdc>] __report_bad_irq+0x1c/0x70
    [<c01350bb>] note_interrupt+0x5b/0x80
    [<c0134c7b>] __do_IRQ+0xdb/0xf0
    [<c0105288>] do_IRQ+0x38/0x60
    [<c0103cba>] common_interrupt+0x1a/0x20
    [<c013007b>] __pm_unregister+0x2b/0x40
    [<c011e171>] __do_softirq+0x31/0xa0
    [<c011e206>] do_softirq+0x26/0x30
    [<c010528d>] do_IRQ+0x3d/0x60
    [<c0103cba>] common_interrupt+0x1a/0x20
    handlers:
    [<e0694480>] (ohci_irq_handler+0x0/0x640 [ohci1394])
    [<e0716d00>] (usb_hcd_irq+0x0/0x60 [usbcore])
    [<e07af7a0>] (yenta_interrupt+0x0/0x30 [yenta_socket])
    Disabling IRQ #11

    lspci:
    0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML
    Express Processor to DRAM Controller (rev 03)
    0000:00:02.0 VGA compatible controller: Intel Corporation Mobile
    915GM/GMS/910GML Express Graphics Controller (rev 03)
    0000:00:02.1 Display controller: Intel Corporation Mobile
    915GM/GMS/910GML Express Graphics Controller (rev 03)
    0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
    Family) High Definition Audio Controller (rev 04)
    0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
    Family) PCI Express Port 1 (rev 04)
    0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
    Family) PCI Express Port 2 (rev 04)
    0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
    Family) PCI Express Port 3 (rev 04)
    0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
    (ICH6 Family) USB UHCI #1 (rev 04)
    0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
    (ICH6 Family) USB UHCI #2 (rev 04)
    0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
    (ICH6 Family) USB UHCI #3 (rev 04)
    0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
    (ICH6 Family) USB UHCI #4 (rev 04)
    0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
    (ICH6 Family) USB2 EHCI Controller (rev 04)
    0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev
    d4)
    0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC
    Interface Bridge (rev 04)
    0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW
    (ICH6 Family) IDE Controller (rev 04)
    0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
    Family) SMBus Controller (rev 04)
    0000:06:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788
    Gigabit Ethernet (rev 03)
    0000:06:07.0 CardBus bridge: Texas Instruments: Unknown device 8031
    0000:06:07.2 FireWire (IEEE 1394): Texas Instruments: Unknown device
    8032
    0000:06:07.3 Unknown mass storage controller: Texas Instruments: Unknown
    device 8033
    0000:06:08.0 Network controller: Intel Corporation PRO/Wireless 2200BG
    (rev 05)

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

  • Next message: Esben Nielsen: "Re: [PATCH] Abstracted Priority Inheritance for RT"

    Relevant Pages

    • irq XX: nobody cared! and uhci_hcd
      ... But even with this workaround USB 1.x devices are not functional due to ... the IRQ for those devices is disabled because nobody cared: ... 0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated ... Allocating PCI resources starting at 0f800000 ...
      (Linux-Kernel)
    • Re: harddrive problems
      ... it is a PCI promise ultra 133 tx2 card with the .42 driver. ... IRQ 9 Microsoft ACPI-Compliant System OK ... IRQ 21 Standard OpenHCD USB Host Controller OK ... IRQ 21 NVIDIA nForce MCP Networking Controller OK ...
      (microsoft.public.windowsxp.general)
    • DMA in Kernel 2.6
      ... 00:01.0 PCI bridge: VIA Technologies, ... 00:0a.1 Input device controller: Creative Labs SB Audigy MIDI/Game port ... number of MP IRQ sources: ... Pin 2-17 already programmed ...
      (Debian-User)
    • 2.6.0-test4-mm2: fdisk causes Oops
      ... I've tried after disabling the Promise controller in the BIOS, ... number of MP IRQ sources: ... PCI: PCI BIOS revision 2.10 entry at 0xfa050, ... drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 ...
      (Linux-Kernel)
    • Re: 2.6.13-rc3-mm3
      ... Normaly the IRQ routed to something about 1xx now they are 1-21?! ... PCI: Transparent bridge - 0000:00:1e.0 ... +PCI BIOS passed nonexistent PCI bus 0! ... raid0: ...
      (Linux-Kernel)