[PATCH] Kconfig changes: s/menu/menuconfig/
From: Bodo Eggert (7eggert_at_gmx.de)
Date: 06/30/05
- Previous message: Guennadi Liakhovetski: "Re: [OT] build just one driver"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Thu, 30 Jun 2005 23:06:01 +0200 (CEST) To: linux-kernel@vger.kernel.org
Part 1: The easy stuff.
In many config submenus, the first menu option will enable the rest
of the menu options. For these menus, It's appropriate to use the more
convenient "menuconfig" keyword.
I hope I got it right, especially the conversions to "if SYMBOL" and
merging the "depends on"s. It looks right, but please check that.
This patch is designed for 2.6.12; the patch for .13-rc1 will be posted
tomorrow as a reply, unless there are major objections to this patch.
Signed-Off-By: Bodo Eggert <7eggert@gmx.de>
--- a/drivers/md/Kconfig 2005-06-19 14:16:41.000000000 +0200
+++ b/drivers/md/Kconfig 2005-06-29 13:23:07.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "Multi-device support (RAID and LVM)"
-
-config MD
+menuconfig MD
bool "Multiple devices driver support (RAID and LVM)"
help
@@ -236,5 +234,2 @@ config DM_MULTIPATH_EMC
---help---
Multipath support for EMC CX/AX series hardware.
-
-endmenu
-
--- a/drivers/w1/Kconfig 2005-05-02 02:25:01.000000000 +0200
+++ b/drivers/w1/Kconfig 2005-06-29 13:25:37.000000000 +0200
@@ -1,6 +1,4 @@
-menu "Dallas's 1-wire bus"
-
-config W1
- tristate "Dallas's 1-wire support"
+menuconfig W1
+ tristate "Dallas's 1-wire bus support"
---help---
Dallas's 1-wire bus is usefull to connect slow 1-pin devices
@@ -54,4 +52,2 @@ config W1_SMEM
Say Y here if you want to connect 1-wire
simple 64bit memory rom(ds2401/ds2411/ds1990*) to you wire.
-
-endmenu
--- a/drivers/i2c/Kconfig 2004-08-14 07:36:32.000000000 +0200
+++ b/drivers/i2c/Kconfig 2005-06-29 13:32:15.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "I2C support"
-
-config I2C
+menuconfig I2C
tristate "I2C support"
---help---
@@ -73,5 +71,2 @@ config I2C_DEBUG_CHIP
a problem with I2C support and want to see more of what is going
on.
-
-endmenu
-
--- a/drivers/fc4/Kconfig 2004-08-14 07:36:56.000000000 +0200
+++ b/drivers/fc4/Kconfig 2005-06-29 13:33:48.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "Fibre Channel support"
-
-config FC4
+menuconfig FC4
tristate "Fibre Channel and FC4 SCSI support"
---help---
@@ -77,5 +75,2 @@ config SCSI_FCAL
prompt "Generic FC-AL disk driver"
depends on FC4!=n && SCSI && !SPARC32 && !SPARC64
-
-endmenu
-
--- a/drivers/ide/Kconfig 2005-06-19 14:16:37.000000000 +0200
+++ b/drivers/ide/Kconfig 2005-06-29 13:40:15.000000000 +0200
@@ -5,7 +5,5 @@
#
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
+menuconfig IDE
tristate "ATA/ATAPI/MFM/RLL support"
---help---
@@ -1053,4 +1051,2 @@ config BLK_DEV_HD
endif
-
-endmenu
--- a/drivers/mmc/Kconfig 2005-06-19 14:16:46.000000000 +0200
+++ b/drivers/mmc/Kconfig 2005-06-29 13:41:02.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "MMC/SD Card support"
-
-config MMC
- tristate "MMC support"
+menuconfig MMC
+ tristate "MMC/SD Card support"
help
MMC is the "multi-media card" bus protocol.
@@ -60,4 +58,2 @@ config MMC_WBSD
If unsure, say N.
-
-endmenu
--- a/drivers/net/wan/Kconfig 2005-06-19 14:16:52.000000000 +0200
+++ b/drivers/net/wan/Kconfig 2005-06-29 13:49:27.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Wan interfaces"
- depends on NETDEVICES
-
-config WAN
+menuconfig WAN
bool "Wan interfaces support"
+ depends on NETDEVICES
---help---
Wide Area Networks (WANs), such as X.25, Frame Relay and leased
@@ -603,5 +601,2 @@ config SBNI_MULTILINE
If unsure, say N.
-
-endmenu
-
--- a/drivers/net/irda/Kconfig 2005-06-19 14:16:48.000000000 +0200
+++ b/drivers/net/irda/Kconfig 2005-06-30 10:13:49.000000000 +0200
@@ -1,6 +1,9 @@
-menu "Infrared-port device drivers"
+menuconfig IRDA_DEVICES
+ bool "Infrared-port device drivers"
depends on IRDA!=n
+if IRDA_DEVICES
+
comment "SIR device drivers"
@@ -401,4 +404,3 @@ config VIA_FIR
via-ircc.
-endmenu
-
+endif
--- a/drivers/net/tulip/Kconfig 2005-05-02 02:24:03.000000000 +0200
+++ b/drivers/net/tulip/Kconfig 2005-06-29 14:09:18.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Tulip family network device support"
- depends on NET_ETHERNET && (PCI || EISA || CARDBUS)
-
-config NET_TULIP
+menuconfig NET_TULIP
bool "\"Tulip\" family network device support"
+ depends on NET_ETHERNET && (PCI || EISA || CARDBUS)
help
This selects the "Tulip" family of EISA/PCI network cards.
@@ -162,5 +160,2 @@ config PCMCIA_XIRTULIP
<file:Documentation/networking/net-modules.txt>. The module will
be called xircom_tulip_cb. If unsure, say N.
-
-endmenu
-
--- a/drivers/net/Kconfig 2005-06-19 14:16:46.000000000 +0200
+++ b/drivers/net/Kconfig 2005-06-30 09:07:31.000000000 +0200
@@ -136,8 +136,6 @@ endif
#
-menu "Ethernet (10 or 100Mbit)"
+menuconfig NET_ETHERNET
depends on NETDEVICES && !UML
-
-config NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
---help---
@@ -165,4 +163,6 @@ config NET_ETHERNET
the questions about Ethernet network cards. If unsure, say N.
+if NET_ETHERNET
+
config MII
tristate "Generic Media Independent Interface device support"
@@ -1763,5 +1763,5 @@ config NE_H8300
source "drivers/net/fec_8xx/Kconfig"
-endmenu
+endif
#
@@ -1769,7 +1769,10 @@ endmenu
#
-menu "Ethernet (1000 Mbit)"
+menuconfig NET_ETHERNET1000
+ bool "Ethernet (1 Gbit)"
depends on NETDEVICES && !UML
+if NET_ETHERNET1000
+
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2082,5 +2085,5 @@ config MV643XX_ETH_2
Ethernet.
-endmenu
+endif
#
@@ -2088,7 +2091,10 @@ endmenu
#
-menu "Ethernet (10000 Mbit)"
+menuconfig NET_ETHERNET10_000
+ bool "Ethernet (10 Gbit)"
depends on NETDEVICES && !UML
+if NET_ETHERNET10_000
+
config IXGB
tristate "Intel(R) PRO/10GbE support"
@@ -2166,5 +2172,5 @@ config 2BUFF_MODE
If not sure please say N.
-endmenu
+endif
if !UML
--- a/drivers/net/arcnet/Kconfig 2005-05-02 02:25:46.000000000 +0200
+++ b/drivers/net/arcnet/Kconfig 2005-06-29 13:48:05.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "ARCnet devices"
+menuconfig ARCNET
+ tristate "ARCnet device support"
depends on NETDEVICES && (ISA || PCI)
-
-config ARCNET
- tristate "ARCnet support"
---help---
If you have a network card of this type, say Y and check out the
@@ -136,5 +134,2 @@ config ARCNET_COM20020_PCI
tristate "Support for COM20020 on PCI"
depends on ARCNET_COM20020 && PCI
-
-endmenu
-
--- a/drivers/net/tokenring/Kconfig 2005-05-02 02:25:48.000000000 +0200
+++ b/drivers/net/tokenring/Kconfig 2005-06-29 14:13:55.000000000 +0200
@@ -3,10 +3,8 @@
#
-menu "Token Ring devices"
+menuconfig TR
depends on NETDEVICES
-
-# So far, we only have PCI, ISA, and MCA token ring devices
-config TR
bool "Token Ring driver support"
+# So far, we only have PCI, ISA, and MCA token ring devices
depends on (PCI || ISA || MCA || CCW)
select LLC
@@ -182,5 +180,2 @@ config SMCTR
To compile this driver as a module, choose M here: the module will be
called smctr.
-
-endmenu
-
--- a/drivers/net/pcmcia/Kconfig 2005-05-02 02:25:47.000000000 +0200
+++ b/drivers/net/pcmcia/Kconfig 2005-06-29 14:21:56.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "PCMCIA network device support"
- depends on NETDEVICES && PCMCIA!=n
-
-config NET_PCMCIA
+menuconfig NET_PCMCIA
bool "PCMCIA network device support"
+ depends on NETDEVICES && PCMCIA!=n
---help---
Say Y if you would like to include support for any PCMCIA or CardBus
@@ -128,5 +126,2 @@ config PCMCIA_IBMTR
To compile this driver as a module, choose M here: the module will be
called ibmtr_cs.
-
-endmenu
-
--- a/drivers/net/wireless/Kconfig 2005-06-19 14:16:52.000000000 +0200
+++ b/drivers/net/wireless/Kconfig 2005-06-29 14:25:06.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Wireless LAN (non-hamradio)"
- depends on NETDEVICES
-
-config NET_RADIO
+menuconfig NET_RADIO
bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
+ depends on NETDEVICES
---help---
Support for wireless LANs and everything having to do with radio,
@@ -361,5 +359,2 @@ config NET_WIRELESS
depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
default y
-
-endmenu
-
--- a/drivers/mtd/nand/Kconfig 2005-05-02 02:25:46.000000000 +0200
+++ b/drivers/mtd/nand/Kconfig 2005-06-29 14:45:32.000000000 +0200
@@ -2,9 +2,10 @@
# $Id: Kconfig,v 1.26 2005/01/05 12:42:24 dwmw2 Exp $
-menu "NAND Flash Device Drivers"
- depends on MTD!=n
+config MTD_NAND_IDS
+ depends on MTD
+ tristate
-config MTD_NAND
- tristate "NAND Device Support"
+menuconfig MTD_NAND
+ tristate "NAND Flash Device Support"
depends on MTD
select MTD_NAND_IDS
@@ -56,7 +57,4 @@ config MTD_NAND_TOTO
Support for NAND flash on Texas Instruments Toto platform.
-config MTD_NAND_IDS
- tristate
-
config MTD_NAND_TX4925NDFMC
tristate "SmartMedia Card on Toshiba RBTX4925 reference board"
@@ -204,4 +202,2 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
The simulator may simulate verious NAND flash chips for the
MTD nand layer.
-
-endmenu
--- a/drivers/mtd/Kconfig 2005-06-19 14:16:46.000000000 +0200
+++ b/drivers/mtd/Kconfig 2005-06-29 14:30:26.000000000 +0200
@@ -1,7 +1,5 @@
# $Id: Kconfig,v 1.7 2004/11/22 11:33:56 ijc Exp $
-menu "Memory Technology Devices (MTD)"
-
-config MTD
+menuconfig MTD
tristate "Memory Technology Device (MTD) support"
help
@@ -261,5 +259,2 @@ source "drivers/mtd/devices/Kconfig"
source "drivers/mtd/nand/Kconfig"
-
-endmenu
-
--- a/drivers/pci/hotplug/Kconfig 2005-05-02 02:25:49.000000000 +0200
+++ b/drivers/pci/hotplug/Kconfig 2005-06-29 14:49:25.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "PCI Hotplug Support"
-
-config HOTPLUG_PCI
+menuconfig HOTPLUG_PCI
tristate "Support for PCI Hotplug (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
@@ -193,5 +191,2 @@ config HOTPLUG_PCI_SGI
When in doubt, say N.
-
-endmenu
-
--- a/drivers/pnp/Kconfig 2005-05-02 02:24:56.000000000 +0200
+++ b/drivers/pnp/Kconfig 2005-06-29 14:51:49.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "Plug and Play support"
-
-config PNP
+menuconfig PNP
bool "Plug and Play support"
depends on ISA || ACPI_BUS
@@ -37,5 +35,2 @@ source "drivers/pnp/pnpbios/Kconfig"
source "drivers/pnp/pnpacpi/Kconfig"
-
-endmenu
-
--- a/drivers/usb/serial/Kconfig 2005-06-19 14:17:06.000000000 +0200
+++ b/drivers/usb/serial/Kconfig 2005-06-29 15:05:18.000000000 +0200
@@ -3,8 +3,5 @@
#
-menu "USB Serial Converter support"
- depends on USB!=n
-
-config USB_SERIAL
+menuconfig USB_SERIAL
tristate "USB Serial Converter support"
depends on USB
@@ -481,4 +478,2 @@ config USB_EZUSB
default y
-endmenu
-
--- a/drivers/acpi/Kconfig 2005-06-19 14:16:26.000000000 +0200
+++ b/drivers/acpi/Kconfig 2005-06-29 15:08:06.000000000 +0200
@@ -3,13 +3,10 @@
#
-menu "ACPI (Advanced Configuration and Power Interface) Support"
+menuconfig ACPI
+ bool "ACPI (Advanced Configuration and Power Interface) Support"
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
-config ACPI
- bool "ACPI Support"
- depends on IA64 || X86
-
default y
---help---
@@ -352,4 +349,2 @@ config ACPI_HOTPLUG_MEMORY
$>modprobe acpi_memhotplug
endif # ACPI
-
-endmenu
--- a/drivers/char/tpm/Kconfig 2005-06-19 14:16:33.000000000 +0200
+++ b/drivers/char/tpm/Kconfig 2005-06-29 15:10:22.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "TPM devices"
-
-config TCG_TPM
+menuconfig TCG_TPM
tristate "TPM Hardware Support"
depends on EXPERIMENTAL && PCI
@@ -35,5 +33,2 @@ config TCG_ATMEL
will be accessible from within Linux. To compile this driver
as a module, choose M here; the module will be called tpm_atmel.
-
-endmenu
-
--- a/drivers/char/ipmi/Kconfig 2005-05-02 02:25:43.000000000 +0200
+++ b/drivers/char/ipmi/Kconfig 2005-06-29 15:11:42.000000000 +0200
@@ -3,6 +3,5 @@
#
-menu "IPMI"
-config IPMI_HANDLER
+menuconfig IPMI_HANDLER
tristate 'IPMI top-level message handler'
help
@@ -64,4 +63,2 @@ config IPMI_POWEROFF
This enables a function to power off the system with IPMI if
the IPMI management controller is capable of this.
-
-endmenu
--- a/drivers/char/watchdog/Kconfig 2005-06-19 14:16:33.000000000 +0200
+++ b/drivers/char/watchdog/Kconfig 2005-06-29 15:14:36.000000000 +0200
@@ -3,7 +3,5 @@
#
-menu "Watchdog Cards"
-
-config WATCHDOG
+menuconfig WATCHDOG
bool "Watchdog Timer Support"
---help---
@@ -546,4 +544,2 @@ config USBPCWATCHDOG
Most people will say N.
-
-endmenu
--- a/drivers/isdn/hisax/Kconfig 2005-06-19 14:16:40.000000000 +0200
+++ b/drivers/isdn/hisax/Kconfig 2005-06-29 15:24:55.000000000 +0200
@@ -1,8 +1,6 @@
-menu "Passive cards"
+menuconfig ISDN_DRV_HISAX
+ tristate "Passive cards (HiSax, HFC)"
depends on ISDN_I4L
-
-config ISDN_DRV_HISAX
- tristate "HiSax SiemensChipSet driver support"
select CRC_CCITT
---help---
@@ -438,5 +436,2 @@ config HISAX_AVM_A1_PCMCIA
endif
-
-endmenu
-
--- a/drivers/isdn/Kconfig 2004-08-14 07:38:04.000000000 +0200
+++ b/drivers/isdn/Kconfig 2005-06-29 15:26:04.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "ISDN subsystem"
-
-config ISDN
- tristate "ISDN support"
+menuconfig ISDN
+ tristate "ISDN subsystem"
depends on NET
---help---
@@ -63,5 +61,2 @@ source "drivers/isdn/capi/Kconfig"
source "drivers/isdn/hardware/Kconfig"
-
-endmenu
-
--- a/drivers/isdn/hardware/avm/Kconfig 2005-05-02 02:24:52.000000000 +0200
+++ b/drivers/isdn/hardware/avm/Kconfig 2005-06-29 15:29:00.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Active AVM cards"
+menuconfig CAPI_AVM
+ bool "Active AVM cards"
depends on NET && ISDN && ISDN_CAPI!=n
-
-config CAPI_AVM
- bool "Support AVM cards"
help
Enable support for AVM active ISDN cards.
@@ -62,5 +60,2 @@ config ISDN_DRV_AVMB1_C4
Enable support for the AVM C4/C2 PCI cards.
These cards handle 4/2 BRI ISDN lines (8/4 channels).
-
-endmenu
-
--- a/drivers/isdn/hardware/eicon/Kconfig 2004-08-14 07:36:59.000000000 +0200
+++ b/drivers/isdn/hardware/eicon/Kconfig 2005-06-29 15:29:27.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Active Eicon DIVA Server cards"
- depends on NET && ISDN && ISDN_CAPI!=n
-
-config CAPI_EICON
+menuconfig CAPI_EICON
bool "Support Eicon cards"
+ depends on NET && ISDN && ISDN_CAPI!=n
help
Enable support for Eicon Networks active ISDN cards.
@@ -49,5 +47,2 @@ config ISDN_DIVAS_MAINT
help
Enable Divas Maintainance driver.
-
-endmenu
-
--- a/drivers/scsi/Kconfig 2005-06-19 14:16:58.000000000 +0200
+++ b/drivers/scsi/Kconfig 2005-06-29 15:30:59.000000000 +0200
@@ -1,5 +1,3 @@
-menu "SCSI device support"
-
-config SCSI
+menuconfig SCSI
tristate "SCSI device support"
---help---
@@ -1797,4 +1795,2 @@ endmenu
source "drivers/scsi/pcmcia/Kconfig"
-
-endmenu
--- a/drivers/scsi/pcmcia/Kconfig 2004-08-14 07:37:25.000000000 +0200
+++ b/drivers/scsi/pcmcia/Kconfig 2005-06-29 15:33:03.000000000 +0200
@@ -3,7 +3,10 @@
#
-menu "PCMCIA SCSI adapter support"
+menuconfig SCSI_PCMCIA
+ bool "PCMCIA SCSI adapter support"
depends on SCSI!=n && PCMCIA!=n && MODULES
+if SCSI_PCMCIA
+
config PCMCIA_AHA152X
tristate "Adaptec AHA152X PCMCIA support"
@@ -80,3 +83,3 @@ config PCMCIA_SYM53C500
module will be called sym53c500_cs.
-endmenu
+endif
--- a/drivers/infiniband/Kconfig 2005-05-02 02:25:44.000000000 +0200
+++ b/drivers/infiniband/Kconfig 2005-06-29 15:35:18.000000000 +0200
@@ -1,5 +1,3 @@
-menu "InfiniBand support"
-
-config INFINIBAND
+menuconfig INFINIBAND
tristate "InfiniBand support"
---help---
@@ -11,4 +9,2 @@ source "drivers/infiniband/hw/mthca/Kcon
source "drivers/infiniband/ulp/ipoib/Kconfig"
-
-endmenu
--- a/drivers/cdrom/Kconfig 2005-06-19 14:16:31.000000000 +0200
+++ b/drivers/cdrom/Kconfig 2005-06-29 11:27:02.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Old CD-ROM drivers (not SCSI, not IDE)"
+menuconfig CD_NO_IDESCSI
+ bool "Old CD-ROM drivers (not SCSI, IDE or ATAPI)"
depends on ISA
-
-config CD_NO_IDESCSI
- bool "Support non-SCSI/IDE/ATAPI CDROM drives"
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
@@ -210,4 +208,2 @@ config CDU535
To compile this driver as a module, choose M here: the
module will be called sonycd535.
-
-endmenu
--- a/drivers/media/dvb/Kconfig 2005-06-19 14:16:41.000000000 +0200
+++ b/drivers/media/dvb/Kconfig 2005-06-29 15:50:58.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "Digital Video Broadcasting Devices"
-
-config DVB
- bool "DVB For Linux"
+menuconfig DVB
+ bool "Digital Video Broadcasting Devices"
depends on NET && INET
---help---
@@ -44,4 +42,2 @@ comment "Supported DVB Frontends"
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
-
-endmenu
--- a/drivers/video/logo/Kconfig 2005-06-19 14:17:08.000000000 +0200
+++ b/drivers/video/logo/Kconfig 2005-06-29 15:59:13.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "Logo configuration"
-
-config LOGO
- bool "Bootup logo"
+menuconfig LOGO
+ bool "Bootup logo configuration"
depends on FB || SGI_NEWPORT_CONSOLE
@@ -63,5 +61,2 @@ config LOGO_SUPERH_CLUT224
depends on LOGO && SUPERH
default y
-
-endmenu
-
--- a/drivers/message/i2o/Kconfig 2004-08-14 07:36:13.000000000 +0200
+++ b/drivers/message/i2o/Kconfig 2005-06-29 16:05:13.000000000 +0200
@@ -1,6 +1,3 @@
-
-menu "I2O device support"
-
-config I2O
+menuconfig I2O
tristate "I2O support"
depends on PCI
@@ -71,5 +68,2 @@ config I2O_PROC
To compile this support as a module, choose M here: the
module will be called i2o_proc.
-
-endmenu
-
--- a/drivers/message/fusion/Kconfig 2005-05-02 02:24:54.000000000 +0200
+++ b/drivers/message/fusion/Kconfig 2005-06-29 16:07:51.000000000 +0200
@@ -1,7 +1,4 @@
-
-menu "Fusion MPT device support"
-
-config FUSION
- tristate "Fusion MPT (base + ScsiHost) drivers"
+menuconfig FUSION
+ tristate "Fusion MPT support (base + ScsiHost)"
depends on PCI && SCSI
---help---
@@ -63,4 +60,2 @@ config FUSION_LAN
If unsure whether you really want or need this, say N.
-
-endmenu
--- a/drivers/ieee1394/Kconfig 2005-06-19 14:16:37.000000000 +0200
+++ b/drivers/ieee1394/Kconfig 2005-06-29 16:10:10.000000000 +0200
@@ -1,7 +1,5 @@
# -*- shell-script -*-
-menu "IEEE 1394 (FireWire) support"
-
-config IEEE1394
+menuconfig IEEE1394
tristate "IEEE 1394 (FireWire) support"
depends on PCI || BROKEN
@@ -180,4 +178,2 @@ config IEEE1394_AMDTP
To compile this driver as a module, say M here: the
module will be called amdtp.
-
-endmenu
--- a/drivers/pcmcia/Kconfig 2005-06-19 14:16:54.000000000 +0200
+++ b/drivers/pcmcia/Kconfig 2005-06-29 16:12:49.000000000 +0200
@@ -6,7 +6,5 @@
#
-menu "PCCARD (PCMCIA/CardBus) support"
-
-config PCCARD
+menuconfig PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
select HOTPLUG
@@ -200,4 +198,2 @@ config PCCARD_NONSTATIC
endif # PCCARD
-
-endmenu
--- a/drivers/telephony/Kconfig 2004-08-14 07:36:32.000000000 +0200
+++ b/drivers/telephony/Kconfig 2005-06-29 16:31:22.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "Telephony Support"
-
-config PHONE
- tristate "Linux telephony support"
+menuconfig PHONE
+ tristate "Telephony support"
---help---
Say Y here if you have a telephony card, which for example allows
@@ -43,5 +41,2 @@ config PHONE_IXJ_PCMCIA
cards manufactured by Quicknet Technologies, Inc. This changes the
card initialization code to work with the card manager daemon.
-
-endmenu
-
--- a/drivers/parport/Kconfig 2005-06-19 14:16:53.000000000 +0200
+++ b/drivers/parport/Kconfig 2005-06-29 16:33:53.000000000 +0200
@@ -6,7 +6,5 @@
#
-menu "Parallel port support"
-
-config PARPORT
+menuconfig PARPORT
tristate "Parallel port support"
---help---
@@ -84,4 +82,5 @@ config PARPORT_PC_PCMCIA
config PARPORT_NOT_PC
+ depends on PARPORT
bool
@@ -141,5 +140,2 @@ config PARPORT_1284
transfer modes. Also say Y if you want device ID information to
appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
-
-endmenu
-
--- a/fs/nls/Kconfig 2004-08-14 07:36:10.000000000 +0200
+++ b/fs/nls/Kconfig 2005-06-30 08:37:19.000000000 +0200
@@ -3,8 +3,6 @@
#
-menu "Native Language Support"
-
-config NLS
- tristate "Base native language support"
+menuconfig NLS
+ tristate "Native language support"
---help---
The base Native Language Support. A number of filesystems
@@ -501,4 +499,2 @@ config NLS_UTF8
the Unicode/ISO9646 universal character set.
-endmenu
-
--- a/fs/xfs/Kconfig 2005-05-02 02:25:53.000000000 +0200
+++ b/fs/xfs/Kconfig 2005-06-30 08:41:21.000000000 +0200
@@ -1,6 +1,4 @@
-menu "XFS support"
-
-config XFS_FS
- tristate "XFS filesystem support"
+menuconfig XFS_FS
+ tristate "XFS support"
select EXPORTFS if NFSD!=n
help
@@ -21,11 +19,13 @@ config XFS_FS
to use an initial ramdisk (initrd) to boot.
+if XFS_FS
+
config XFS_EXPORT
bool
- default y if XFS_FS && EXPORTFS
+ default y if EXPORTFS
config XFS_RT
bool "Realtime support (EXPERIMENTAL)"
- depends on XFS_FS && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say Y here you will be able to mount and use XFS filesystems
@@ -44,5 +44,4 @@ config XFS_RT
config XFS_QUOTA
bool "Quota support"
- depends on XFS_FS
help
If you say Y here, you will be able to set limits for disk usage on
@@ -61,5 +60,4 @@ config XFS_QUOTA
config XFS_SECURITY
bool "Security Label support"
- depends on XFS_FS
help
Security labels support alternative access control models
@@ -73,5 +71,4 @@ config XFS_SECURITY
config XFS_POSIX_ACL
bool "POSIX ACL support"
- depends on XFS_FS
help
POSIX Access Control Lists (ACLs) support permissions for users and
@@ -83,3 +80,3 @@ config XFS_POSIX_ACL
If you don't know what Access Control Lists are, say N.
-endmenu
+endif
--- a/fs/Kconfig 2005-06-19 14:17:10.000000000 +0200
+++ b/fs/Kconfig 2005-06-30 09:40:19.000000000 +0200
@@ -1718,10 +1718,6 @@ config RXRPC
endmenu
-menu "Partition Types"
-
source "fs/partitions/Kconfig"
-endmenu
-
source "fs/nls/Kconfig"
--- a/init/Kconfig 2005-06-19 14:17:44.000000000 +0200
+++ b/init/Kconfig 2005-06-30 09:17:08.000000000 +0200
@@ -391,8 +391,6 @@ config BASE_SMALL
default 1 if !BASE_FULL
-menu "Loadable module support"
-
-config MODULES
- bool "Enable loadable module support"
+menuconfig MODULES
+ bool "Loadable module support"
help
Kernel modules are small pieces of compiled code which can
@@ -413,7 +411,8 @@ config MODULES
If unsure, say Y.
+if MODULES
+
config MODULE_UNLOAD
bool "Module unloading"
- depends on MODULES
help
Without this option you will not be able to unload any
@@ -435,5 +434,4 @@ config OBSOLETE_MODPARM
bool
default y
- depends on MODULES
help
You need this option to use module parameters on modules which
@@ -443,5 +441,5 @@ config OBSOLETE_MODPARM
config MODVERSIONS
bool "Module versioning support (EXPERIMENTAL)"
- depends on MODULES && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
Usually, you have to use modules compiled with your kernel.
@@ -454,5 +452,4 @@ config MODVERSIONS
config MODULE_SRCVERSION_ALL
bool "Source checksum for all modules"
- depends on MODULES
help
Modules which contain a MODULE_VERSION get an extra "srcversion"
@@ -466,5 +463,4 @@ config MODULE_SRCVERSION_ALL
config KMOD
bool "Automatic kernel module loading"
- depends on MODULES
help
Normally when you have selected some parts of the kernel to
@@ -482,3 +478,4 @@ config STOP_MACHINE
help
Need stop_machine() primitive.
-endmenu
+
+endif
--- a/net/sctp/Kconfig 2004-08-14 07:36:32.000000000 +0200
+++ b/net/sctp/Kconfig 2005-06-30 08:53:42.000000000 +0200
@@ -3,10 +3,8 @@
#
-menu "SCTP Configuration (EXPERIMENTAL)"
- depends on INET && EXPERIMENTAL
-
-config IP_SCTP
+menuconfig IP_SCTP
tristate "The SCTP Protocol (EXPERIMENTAL)"
depends on IPV6 || IPV6=n
+ depends on INET && EXPERIMENTAL
select CRYPTO if SCTP_HMAC_SHA1 || SCTP_HMAC_MD5
select CRYPTO_HMAC if SCTP_HMAC_SHA1 || SCTP_HMAC_MD5
@@ -87,3 +85,2 @@ config SCTP_HMAC_MD5
endchoice
-endmenu
--- a/net/bridge/netfilter/Kconfig 2005-05-02 02:26:17.000000000 +0200
+++ b/net/bridge/netfilter/Kconfig 2005-06-30 09:00:33.000000000 +0200
@@ -3,9 +3,7 @@
#
-menu "Bridge: Netfilter Configuration"
- depends on BRIDGE && NETFILTER
-
-config BRIDGE_NF_EBTABLES
+menuconfig BRIDGE_NF_EBTABLES
tristate "Ethernet Bridge tables (ebtables) support"
+ depends on BRIDGE && NETFILTER
help
ebtables is a general, extensible frame/packet identification
@@ -208,4 +206,2 @@ config BRIDGE_EBT_ULOG
To compile it as a module, choose M here. If unsure, say N.
-
-endmenu
--- a/sound/Kconfig 2005-05-02 02:26:19.000000000 +0200
+++ b/sound/Kconfig 2005-06-29 16:50:57.000000000 +0200
@@ -2,7 +2,5 @@
#
-menu "Sound"
-
-config SOUND
+menuconfig SOUND
tristate "Sound card support"
help
@@ -33,12 +31,11 @@ config SOUND
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+if SOUND
+
source "sound/oss/dmasound/Kconfig"
if !M68K
-menu "Advanced Linux Sound Architecture"
- depends on SOUND!=n
-
-config SND
+menuconfig SND
tristate "Advanced Linux Sound Architecture"
depends on SOUND
@@ -70,12 +67,7 @@ source "sound/sparc/Kconfig"
source "sound/parisc/Kconfig"
-endmenu
-
-menu "Open Sound System"
- depends on SOUND!=n && (BROKEN || (!SPARC32 && !SPARC64))
-
-config SOUND_PRIME
+menuconfig SOUND_PRIME
tristate "Open Sound System (DEPRECATED)"
- depends on SOUND
+ depends on SOUND && (BROKEN || (!SPARC32 && !SPARC64))
help
Say 'Y' or 'M' to enable Open Sound System drivers.
@@ -83,7 +75,5 @@ config SOUND_PRIME
source "sound/oss/Kconfig"
-endmenu
-
endif
-endmenu
+endif
-- The worse the weather, the more you are required to be out in it. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
- Previous message: Guennadi Liakhovetski: "Re: [OT] build just one driver"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
